Is there a way to see the string returned by SOAP adapter at the Reciever

Hello Friends
I have a scenario as follows
Sender:        Outside Client   -
>>  Soap Adapter   -
>XI   --->   RFC Adapter   ---> ZBAPI.
The outside client sends an id to search through XI using SOAP adapter which inturn calls a ZBAPI
to look for the record in the table and sends the found record back to XI and from there to the outside client via SOAP adapter.
I have made sure that the ZBAPI is being contacted successfully.
However, the return data is not coming to the client.
Is there a way to findout what xml string is being received at the receiver SOAP adapter.
I have checked the zbapi, mapping etc., and everything is ok.
Any suggestion or feedback will be highly appreciated.
Thanks
Ram

You should be able to see the Request and the response in SXMB_MONI.
Just make sure that synch logging is turned on in MONI. Add the entry LOGGING_SYNC with value as 1 in SXMB_ADM --> Integartion Engine Configuration.
Regards
Bhavesh

Similar Messages

  • Is there a way to see what ports are mapped via UPnP on the E4200 v1?

    I can see the manual port mappings in the App&Gaming->Single Port Forwarding section but I also want to see what ports are mapped via UPnP.  Any way to do this?

    earthmyrll120288 wrote:
    I believe there is no way we can do it using the regular Linksys firmware. It could be possible if you use a different firmware. However, installing another firmware (third party) would void the warranty of the device.
    Unless you just return back to stock Linksys firmware that un-voids the warranty!
    Member of the Professional Aviation Safety Specialists Union!

  • In ICal is there a way to see all of the text in all day events on the month view of the calendar.  Seems to wrap text only if there is a time on the event

    In ICal is there a way to see all of the text in all day events on the month view of the calendar?  Seems to wrap text only if there is a time on the event

    The paths won't agree on the two OSs so a simple XML import isn't likely to work.
    See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
    tt2

  • Is there a way to see the full album names on my iPod Touch?

    When albums have long names, they are cut off. This isn't normally a problem, except if the album is part of a multi-disc set, where the names all begin the same way, as shown in this screen shot of my iPod Touch
    At the end of each album name is a number (I, II, III).
    Is there a way to see full album names on iPod Touch?

    Flip the iPod horizontal and look at the cover flow mode. You will be able to see the complete album name, even if you don't have the artwork.

  • Is there a way to see the IP addresses I logged in from?

    Is there a way to see my IP addresses that I logged into my Apple ID from? Looking around other people thought this was just something Apple did from time to time, but I figure if I can see my login IPs I should be able to evaluate if there was any suspicious activity. I didn't see a way when I logged in to change my password as a precaution. Google does a good job of letting you see your IP logins.
    I got this email from Apple
    Dear ****,
    “iPhone” was automatically removed as a trusted device from two-step verification for your Apple ID (m•••••@email.address)
    Your trusted devices are used to verify your identity when you make changes to your account, sign in to iCloud, or make iTunes or App Store purchases from a new device.
    To protect your security, when you erase a device it will be removed from your list of trusted devices. To re-verify your device, sign in to My Apple ID choose Password and Security, and then Add or Remove Trusted Devices.
    If you did not erase this device or if you believe an unauthorized person has accessed your account, you should reset your account password immediately at My Apple ID.
    If you need additional help, visit Apple Support.
    Apple Support

    Sign out of the iTunes Store then back in. That will refresh the amout.

  • Is there a way to see the photo information on the iCloud sharing pages?

    There seems to be an issue with Apple wanting people to see the information for each photo easily.  When I share a photo in a shared album on iCloud, I don't see the title nor do I see any photo information, only the date that the photo was shared. 
    I DO see the date of the picture when it's in slide show view, in light font at the bottom right-easy to miss, but not when it's the basic view that allows us to scroll through the photos. 
    Is there a way to see the title and date of the photos on the left where the black space is and the sharing info is?
    It seems that this whole Photos program is half-done...
    Thank you,
    Dave

    There is an App at the App store called "Battery Magic". You can get a trial version, (free) that will show you what you want to know, including battery life, and how long you can play games, music and other things on your current battery life.
    You can also download the full version. I think its $0.99.

  • Is there a way to see on my iPhone my entire library (more than 2.000 CDs) without having all the files stored? I've noticed that, for mistake, I had some songs of my library in grey (the mp3 was not working)

    Is there a way to see on my iPhone my entire library (more than 2.000 CDs) without having all the files stored? I've noticed that, for mistake, I had some songs of my library in grey (the mp3 was not working)

    Is there a way to see on my iPhone my entire library (more than 2.000 CDs) without having all the files stored? I've noticed that, for mistake, I had some songs of my library in grey (the mp3 was not working)

  • Is there a way to see SAN luns from the UCS fabric interconnect.

                       Hello,
    I have recently added a 3rd and 4th vHBA to a B440 running RHEL5.
    Originally I had 2 vHBAs', and each created a path to 172 luns. (I was multipathed to 172 luns)
    Now I have added two additional vHBA's and my SAN admin assures me he has mapped, zoned and masked all 172 luns to the 2 new vHBA's.
    So, at this time I should have 4 paths to 172 luns....but I don't.
    What I see is 4 paths to 71 luns.
    I still see 2 paths to all 172 luns, but only see 4 paths on 71 of them.
    Its almost like my SAN admin either mapped or masked only 71 of the 172 luns to my 3rd and 4th path.
    Via the RHEL5 OS I have rescaned the FC paths, rebooted, done lsscsi, looked in the lowest level places for what devices are present on my FC channels, always I see 172 devices on the 2 original FC paths and 71 devices on the 2 new FC paths.
    My question is....is there a way to see all devices (luns) accociated with an vHBA from the command line in the Fabric Interconnect?
    My configuration is UCS w 2 FI's, using 8Gb FC connections to Cisco 9500 directors, to an EMC DMX4.
    Thanks in advance,
    Gene

    wdey,
    The link you supplied in your response is the answer.
    You can look at the devices on the FC boot paths, but not while the OS is running.
    I have a test server I could reeboot to try what you have in your document, and it does work.
    Too bad Cisco could not create a linux util rpm that would allow looking down the fabric while running. Im quit sure emulex has this kind of util, called HBAanywhere...at least for solaris.
    In any case, thanks for the link to your article, it was VERY good!
    My problem with seeing a shorter list of luns on 2 of my FC paths may get solved this afternoon by a change my SAN admin is going to make.. If it does I will post the fix.

  • HT4236 on syncing photos to my iphone from my mac (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version o

    on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?

    Thanks for your reply
    I solved my problem,
    Definitely a bug in syncing through itunes.
    - Connect Iphone with MacBook Pro through USB
    - Go to iphone on itunes, photos, deselect photo synchronization.
    - Sync (all pics will be removed from iphone)
    - Close itunes, iphoto, disconnect iphone
    - Select in finder: (home)-pictures-iphoto library.
    - Sec click on iphoto library and choose "show package contents"
    - Delete iPod Photo Cache
    - Close finder
    - Empty trash
    - Reconnect iphone
    - Allow photo synchronization again and everything works smooth.
    After this, changes made in iphoto are instantaneously reflected in iphone photos.
    Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
    In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
    Hope this improves. Still have to try cloud though.
    Thanks
    RC

  • If I use an SD card for both Windows 7 and Mac, is there any way to see the documents from the Mac sight while on the windows side?

    If I use an SD Card on both the windows 7 and Mac OS (using bootcamp), is there any way to see the data seen on the Mac OS side while using the Windows OS?

    Windows Aero style uses a different background image than Mac:
    Windows Aero:
    #nav-bar {
    background-image: linear-gradient(rgba(253,253,253,0.45), rgba(255,255,255,0));
    Mac:
    #nav-bar {
    background: url(chrome://browser/skin/Toolbar-background-noise.png),
    linear-gradient(hsl(0,0%,93%), hsl(0,0%,83%));
    I can't test hands on, but you might be able to clear that OSX "fog" using a rule such as:
    @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
    #nav-bar, #PersonalToolbar {
    background-image: none !important;
    background-color: transparent !important;
    This could be applied using the Stylish extension or by creating/editing a userChrome.css file.

  • My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

    My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

    Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
    I hope you get your Mac back and I hope this was helpful!

  • Is there a way to see the waveform of the audio in the primary video track?

    Is there a way to see the audio waveform of the audio in the video (primary) track?
    Scrubbing to determine precise edit points is useful, but seeing the dialog audio waveform would be much better.
    You can see the audio waveform in additional audio-only tracks, but for cutting to dialog you really need to see the primary audio waveform that's in the video track.
    Any thoughts?

    msimpson,
    No. The waveforms are only visible in the two separate audio tracks.
    A work around would be to use Advanced>Extract Audio command.
    This command, in spite of its name, copies the audio to one of the audio tracks and sets the volume level of the audio to zero in the video track.
    Now you'll have the waveform to use in editing. When you're done with it, you could delete it and raise the volume again on the video track.
    Matt

  • Is there a way to see the time of calls received or made yesterday?

    I would like to see the time of phone calls that I make or receive, but the call log just says yesterday or Monday but no actual time. Is there a way to see times?

    Touch the ">"  on the right border next to the call and the time is displayed on the next page.

  • I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project in iphoto. Is there any way to see my print order history and reorder the same book for print ?

    I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
    Is there any way to see my print order history and reorder the same book for print ?

    No.  Apple only keeps the pdf file for a book for 30 days.  Without the library and book project you won't be able to reorder the same book.
    Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
    OT

  • HT1435 During normal charging phase is there a way to see the estimated battery% ?

    A1285 (EMC 2287) iPod nano 4th Gen
    During normal charging phase is there a way to see the estimated battery% ?   If I am at 10% and plug in to charge and it takes 30 minutes to get to 55% then I know there are about 30 more minutes of charging until I'm at 100%.

    There is an App at the App store called "Battery Magic". You can get a trial version, (free) that will show you what you want to know, including battery life, and how long you can play games, music and other things on your current battery life.
    You can also download the full version. I think its $0.99.

Maybe you are looking for