Is there a way to select multiple audio tracks and make all of them stereo pair at the same time?

I selected multiple tracks, pressed "option L" but was not able to make multiple clips stereo pair at the same time.

If I remember correctly it is not possible modify a group of selected clips on the timeline with the Stereo Pair command - unless all the selected clips have exactly the same properties - such as being linked to video clips, etc. So you have to manually go through and select the dual mono tracks you want to pair individually or in smaller groups to be able to apply the Stereo Pair command.
If you select a bunch (a couple) of clips, and go to the menu Modify, you will see if Stereo Pair is grayed out or not. If it is grayed out, then you can't apply it to those clips as a group, but you probably will be able to apply it if you make smaller selections of clips.
MtD

Similar Messages

Is there a way to select multiple clips in FCP 7 and make all of them stereo pair at the same time?

I know,.... I'm still using FCP 7, but since there are no forums for this aaplication anymore, I figured I ask it here.
I want to select multiple clips on the timeline and make them all stereo pair. I pressed "Option L", but that does not work. Is there a way to do this?
Thanks,
Lisa

https://discussions.apple.com/community/professional_applications/final_cut_stud io
Al

My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?

I have a Macbook Pro and it works perfectly fine on my AirPort extreem until I try and put a different computer, ipod, or phone on the wireless. When I try and put more than one device on the network only one device will receive internet access and the other(s) will get a message saying it is because of a shared ip address. Is there a way to change it so they can all share an ip address? Please help me configure my wifi and devices so that I can use more than one device on the wifi at a time.
Thanks!

Hmm... Those two screen shot disagree. the first shows that the duplication was on 192.168.1.64, while the second showed you were using 192.168.1.63. That confuses matters further.
From the screen that you show, click on the "Advanced..." button in the lower right, then the "TCP/IP" tab.
SHow us a shot of the screen or copy the text from the "Configure IPv4" line and the three under that (IPv4 Address, Subnet Mask, and Router).
Then launch AirPort Utility.
If you have one of the old 5.6.x versions:
* Click on the icon for your Extreme.
* Click on the "Manual Setup" button and supply the password if needed.
* Click on the "Internet" icon at the top.
* Click on the "DHCP" tab.
* Give us a screen shot or transcribe the results.
If you have AirPort Utility 6.2 (the latest):
* Click on the icon for your Extreme.
* Click on the "Edit" button in the balloon that pops up, supply the password if needed.
* Click on the "Network" tab.
* Give us a screen shot or transcribe the results.

Is there a way to select multiple files and initiate the Capitalize function?

I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
Good luck...

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT

HT202000 Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers )

Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers ) I do this on my Windows but cannot find for mac. I am transitioning from Windows brain to Mac brain and having a little difficulty
OS Yosemite

Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers ) I do this on my Windows but cannot find for mac. I am transitioning from Windows brain to Mac brain and having a little difficulty
OS Yosemite

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
Control-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
Control Option-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

I have a first generation iPad and got my husband the iPad 2 for xmas. is there a way to transfer his tiny tower game from my iPad to his without using the same iTunes account?

I have a first generation iPad and got my husband the iPad 2 for xmas. is there a way to transfer his tiny tower game from my iPad to his without using the same iTunes account?

Apps are only tied to one account... You can set up two iTunes accounts on your computer, however, and let his iPad sync to his account. If he has never backed up his apps to a computer, however, he will have to redownload all the apps. Afterwards, he can backup to iCloud instead of your computer.
http://support.apple.com/kb/ht1495

Is there a way to take an existing PDF and make it into a form that will aggregate the responses?

Is there a way to take an existing PDF and make it into a form that will aggregate the responses?

Sabian has pointed you to an older Acrobat X tutorial.
It depicts the use of acrobat.com "workspaces".
"Workspaces" are going away soon.
See:
https://forums.adobe.com/docs/DOC-4203
So, what is shown in the Adobe TV session is, basically, obsolete.
For forms you may want to give acrobat.com's (now "Adobe Document Solutions) FormsCentral subscription service a look-see.
https://new.acrobat.com/en_us/products/formscentral.html
Be well...

Hello, is there a way to redact a word or item from a pdf using adobe pro X the same way you can if you convert a word doc using pro X on a pc?

hello, is there a way to redact a word or item from a pdf using adobe pro X the same way you can if you convert a word doc using pro X on a pc?

If the document is not a scanned image or protected from editing then you should be able to edit it. I would have to guess you have a scan and when you converted to Word, you ran OCR (Optical Character Recognition) on it converting the scanned image to live text.
This is the forum for the free Adobe Reader which can not edit or redact.

Is there NO way to select multiple songs to go into a Music Playlist at once, vs doing it one by one?!

Argh. So irritating how something that should be very simple and intuitive results in useless calls to Sprint (my carrier) and BB. with endless holds, transfers, pasing the buck,and still no results. Then I'm suggested to go to the Forums...you know...where other paying BB customers can try tp provide the IT support that BB apparetnly could care less to do for its paying customers?
Anyway, I want to have multiple playlists in my BB Music so that when I host parties, I can play a particular type of music by selecting one of the playlists. I was able to move songs to my BB but they only seem to move to the general Music Library (All Songs). I was able to create Playlists, but it seems you can only move songs to the Playlist ONE AT A TIME. There is apparently no way to select multiple songs to go to a playlist? No way to move an entire folder of music from my PC to my BB songs, as its own separate sub-folder (i.e., Playlist)?
I know I've been able to do this with other devices in the past.
Otherwise the BB Music Playlist options seems totally pointless.
Tx

It says: ''users can re-enable it from the Add-ons Manager if necessary''
*https://addons.mozilla.org/en-US/firefox/blocked/i106
*https://addons.mozilla.org/en-US/firefox/blocked/i107
<blockquote>Why was it blocked?<br />
The RealPlayer Browser Record extension is causing significant problems on Flash video sites like YouTube. This block automatically disables the add-on, but users can re-enable it from the Add-ons Manager if necessary.</blockquote>
You can try to delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons

Is there a way to select multiple sequences and batch export them using the same settings in CS6?

I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6. We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time.
so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each.... Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos. I thought i would be able to send all of the sequences to Adobe Media Encoder, but i dont see that option either.
Any suggestions/
thanks!

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Is there a way to save multiple audio hardware settings?

Hi Everyone,
                       I use a multiple preamp set up to record. I would like to be able to playback and do my editing without having to have my preamps all plugged in and just use the computer's built in hardware. Of course as soon as I disconnect them Audition tells me I need to go back and set up my audio hardware settings since they have now changed.
Is there any way I can save the audio hardware settings so that I can switch back and forth between the computer's audio hardware and my preamp set up without having to go back and manually enter all the settings each time?

One feature request I've been meaning to submit has been remembering the previous settings for a device and defaulting to them when the device is re-selected. Thanks for the reminder on that.
As for CS6, you might be able to take advantage of the Machine-Specific Preferences feature to make this a bit easier. Here's what I would recommend:
Configure Audition with your primary audio device, get the Channel Assignments and all other settings how you like them, then close Audition.
Next, you're going to copy one of the Audition preference files to another location on your system. Your existing preference files will be located in one of the following locations:
       Mac OS X: /Users/<username>/Library/Preferences/Adobe/Audition/5.0/
       Windows XP: /Documents and Settings/<username>/Application Data/Adobe/Audition/5.0/
       Windows 7: /Users/<username>/AppData/Roaming/Adobe/Audition/5.0/
    (Note that the "Library," "Application Data," and "AppData" folders may be hidden by the OS by default.)
Copy the file MachineSpecificSettings.xml to the appropriate directory below:
     Mac OS X: /Library/Preferences/Adobe/Audition/5.0/
       Windows 7/XP (32-bit): /Program Files/Common Files/Adobe/Audition/5.0/
       Windows 7/XP (64-bit): /Program Files (x86)/Common Files/Adobe/Audition/5.0/
Launch Audition and make sure Preferences > Audio Hardware > Use Machine-specific device defaults is selected. Now, each time you launch Audition it should attempt to load your primary device and configuration. If it can't be found, you'll still be notified and able to select your built-in input/output, but the next time you launch with the primary device connected, it should load as if it never left.
There's a bit more information on Machine Specific Settings on our Inside Sound blog post. It wasn't intended for this use, but I think it will make this particular request a bit simpler. Meanwhile, I'll make sure we have a feature in the database to look into this.

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

Is there a way to select multiple track sections from different tracks and join them to make the chorus on iPhone?

I am currently using the iPhone to record my vocals on top of professional beats, or riddims as they are called in the dancehall world. Is there a way for me to select multipe voice sections from different tracks, copy them and then paste them later in the project. I don't want to record the chorus more than once. Normally what I do is sync the project to my wife MacBook Air and then from there edit it but I would like to avoid this. Also, I use the earpods microphone to record my voice and of course it doesn't come out professional quality but it is decent. Do you recommend a microphone that plugs to the iPhone or should I get an interface? Thanks for the help.

You can either copy and paste single regions or duplicate sections, if you want to copy regions
from different tracks in parallel.
See: Extend a song with song sections
Adjust the length of your sections in a way, that the regions you want to copy from different tracks are together in a section of your song.
Add a copy of a section:
Open the song section controls, choose the section you want to copy, then tap Duplicate.The copy is added after the last section.
Tap Done to close the song section controls.
After copying the section, move the new section to the end of the song:
Change the order of sections:
Open the song section controls, then tap Edit.
Drag a section up or down in the list by the handle on its right edge.
When you are finished, tap Done.
Tap Done to close the song section controls.
Regards
Léonie

Is there a way to select multiple audio tracks and make all of them stereo pair at the same time?

Similar Messages

Maybe you are looking for