Is there a way to set a default From address for my iCloud account?

Is there a way to have mail use my .mac address as my preferred iCloud address?  I have mail configured to set the From header based on the account I'm accessing, so my work email will come from my work account, and my personal email will come from my personal account.  I'd like to keep that configuration.
Unfortunately, I use my .mac address for my personal email, and Apple keeps attaching new, unwanted email addresses to my iCloud account (.mac.com, .me.com and now .icloud.com).  Mail somehow sees three addresses on my iCloud account, and defaults the From header to .me.com.   For a variety of reasons, including personal preference, I don't ever want to use the .me.com or .icloud.com addresses.
Alternately, is there a way to delete the unwanted .me.com and .icloud.com addresses?
Thanks

I appreciate the reply, but it only gets me partway there.  I already have that option set to 'Account of selected mailbox' so that replies to email on my work account (a non-iCloud account) come from my work email address.
My problem is my personal mail is on an iCloud account that, thanks to Apple, now has three email addresses associated with it.  So when I reply to a personal email,  the 'Account of selected mailbox' option frequently, but not always, chooses the wrong iCloud address for the From field.
Ideally, I'd like to be able to tell Mail that it should use my .mac address for email from my iCloud account, and my work address for mails from my work account.  I'd like it to never use the .me or .icloud addresses.  I don't think there's an automatic way to do that.
I'll likely end up filing a bug report with Apple.

Similar Messages

  • Is there a way to set a default wifi network for my iPhone 5s?

    Hi,
    I have two networks in my home. When I first walk in, my phone automatically recognizes my extended wifi network.  But since I tend to spend most of my time in the back of the home, I rather have it connect to that network.
    Is there a way to change the default?
    And no, I can't move the AirPort Base or AirPort Express due to the way the cable is in my home.
    Thank you in advance (hope I used the correct terminology). 

    I have an Airport Extreme upstairs with my computer plus an Airport Express downstairs. They are both defined to be on the same network with Airport Utility. My mobile device use which ever one is giving them the best signal even when I am down in the basement.

  • Is there a way to set new default heap size for Java?

    Hi,
    I have a problem with setting global heap size for installed version of Java. By global I mean that every program that will be run using that version of Java, will be using that amount of memory. for heap. I know that I can use Xmx and Xms for each program that I start, but I don't want to do this. I just want to set some kind of property for installed version of Java.

    Launch Firefox and set the web page as wide as you want by dragging the hash marks at the lower right corner. Center the page on your screen where you want it. Then quit Firefox. launch Firefox again. The page should be just where on the screen and sized as you set it prior to quitting.

  • HT204053 Is there a way to set up subsidiary email addresses for one appleID?

    My children now each have an iPod touch and I'd like to set them up with, for example, the ability to facetime my wife or me without having to set up a new AppleID for each of them. All our music is consolidated on my AppleID and I don't want to change that!

    You can create up to three email 'aliases' on your account - these are additional addresses (not accounts) which deliver into your inbox.
    BUT
    You will get all their mail and they will get all of yours: and once created you can never move that address away from your account to become a separate account, so that when your kids grow up and don't want you reading their email they won't be able to keep the same address.
    So I would strongly advise you not to do that, but to create a new and separate iCloud account for each of them. You will find that much more practical and convenient.
    There is no problem about iTunes: just go on using the same login for iTunes - it's perfectly possible to be using one ID for iCloud and another for iTunes, iTunes Match and iTunes in the Cloud.

  • Is there a way to set the default level of keyframe easing?

    I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence.  I'm having to adjust the easing of each keyframe individually. 
    Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor?  It would save a lot of time.

    No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
    http://www.adobe.com/go/wish

  • Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

    When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
    Is there a way to set the default Source Range to something besides Sequence In/Out?
    My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
    I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap". 
    For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
    Now here's that same in/out in "Lighter Appearance":
    Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
    Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
    So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
    Thank you!

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

  • Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

    Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
    I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
    Thanks!

    Hi John,
    Have you tried repairing Reader and checked?
    Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
    Regards,
    Anoop

  • Is there a way to set a default solution .runsettings file in VS2013?

    This is a question my coworker asked over on StackOverflow
    [here], but hasn't received a single comment or answer. Thought I'd repost it here since I know the VS guys are more likely to see it here...
    I'm using VS2013 with the built-in unit test framework. I've created a .runsettings file that sits in the Solution Items folder. When I select Test -> Test Settings -> Select Test Settings File, I am able to choose my .runsettings file and it works
    as expected.
    When I exit out of VS2013 and then re-load the project, I have to re-select the .runsettings file. Is there any way to set the default .runsettings file at solution level so it gets persisted?

    Hi,
    I can’t get your issue on my side(VS2012 Update 4 machine and VS2013 Update 1 RC machine). If you are using VS2012, please upgrade it to VS2012 Update 4. If you are using VS2013, please upgrade it to VS2013 Update 1 RC.
    When I restart VS and re-load the project, the .runsettings file is still selected
    with the Select Test Settings File menu option and .runsettings file is still used when I run the unit test.
    I doubt that there is anything wrong with your VS. As I mentioned above, please reset your VS settings through Tools->Import and Export settings->Reset all settings…
    If no help, try some other devenv commands to fix:
    1.devenv.exe  /safemode
    2.devenv.exe  /resetskippkgs
    3.devenv.exe  /installvstemplates
    4.devenv.exe  /resetuserdata 
    devenv.exe can be located under your VSlocation/Common7/IDE
    What your need is to put it to run prompt and add commands to it.
    If the issue still exists, please repair or reinstall your VS.
    Meanwhie, if you have some anti-virus software running when you work with VS, please close them to check the reuslt.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is there a way to set the default length of appointments/events to 1 hour?

    Is there a way to set the default length of appointments/events to 1 hour?

    No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
    http://www.adobe.com/go/wish

  • My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

    My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
    It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
    Also, if we bought a song in future we would want to be able to both have access to it.
    Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
    Thank you in advance.

    FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
    ecbclb wrote:
    Will we have to create a seperate account for her, or can we all have the same one?
    You can but you will not be able to limit what she syncs.
    I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
    I don't recommend using (only) the checkmarks to select what to sync.
    Each of you can create your own playlists then sync only those playlists.
    Then add/delete from your own playlists to change iPod content.
    The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
    I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
    You and your husband can share an iTunes library and let your daughter have her own.

  • Is there any way to set global language as english for users  in portal

    Hi,
    Is there any way to set global language as english for all the users  in portal (for all the screens,applications etc) irrespective of browser settings,language in jco,user settings in backend .
    the reason why i am asking is we are implementing global implementation project and for some users in switzerland because of their browser is not english they are getting language other than english.we dont want to ask each user to change their browser language.we just want to force the portal to display content only in english
    Thanks
    Bala Duvvuri

    Hi ,
    You can add property  'request.mandatorylanguage=<your_language>'
    and property  'request.mandatorycountry'
    on file 'prtDefault.properties' located in :
    ..server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\system\properties\prtDefault.properties
    Then restart the server.
    See :
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/938297a5061d69e10000000a1553f6/frameset.htm
    Regards,
    Gilad

  • How do I set the default from email for invititations

    I use my ical calendar for different business and personal calendars.
    Is there any way to set up the "from" email account to coinscide with the calendar the event is made for.
    i.e. If I make a personal event, the invite is sent from my personal e-mail, and if I make a business appointment, the invite is sent from my business account.
    I was able to do this with google calendar, but I am trying to be all in the cloud.
    Any help would be appreciated.
    P.s. running 10.7 and iCal vs.5.0.1
    Thanks

    I understand that you want each of several email accounts to act independently, such that mail for account 1 is sent and received only on that account, then account 2 likewise, etc.
    For each email account, left click on the account name and then select 'View settings for this account'.
    On the 'Account Settings' page, look at the 'Reply-to-Address' (should be blank) and also select the 'Manage Identities' box, which shows the default name and email address. If the default is not for that account, you can add or edit the entries and set the default.
    Back on the 'Account Settings' page, select 'Outgoing Server (SMTP)' and check the user name/account there. It should be for the same account.
    For each account, the other accounts should not be mentioned in any of the places identified above.
    - duggabe

  • Is there a way to share one music library with two seperate icloud accounts?

    Is there a way to share one music library with two seperate icloud accounts? I have over 12,000 songs in my library and my son likes the same music, but recently his ipod touch is picking up the texts from my wife's and my phone? I was told the only way to stop this is by giving him his own icloud account which would mean he wouldn't have access to my music library. Any ideas?

    He can still use your Apple ID for iTunes content, no issues. He just gets a separate ID for everything else.

  • Is there a way I can view/manage devices linked to my iCloud account?

    Is there a way I can view/manage devices linked to my iCloud account? I know how to view the devices linked to my iTunes account, but I am not sure if this is possible to see with an iCloud account.

    You can't, except by seeing if they are using services associated with the account.  You could, for example, launch Find My iPhone on iCloud.com to see what devices appear (which obviously wouldn't show devices not using Find My iPhone).  Similarly, you could go to Settings>iCloud>Storage & Backup>Manage Storage to see what devices appear on the Backups list (which won't show devices not using iCloud backup).

  • Is there any way to see if any other FaceTime id or iCloud account has logged into my personal iPhone and iPad

    Is there any way to see if any other FaceTime id or iCloud account has logged into my personal iPhone and iPad

    If you are concerned.  
    Log off all iCloud and Apple ID accounts on your devices.
    Change you password for Apple ID and iCloud.
    Please read so you don't get stuck!
    http://support.apple.com/kb/HT5621

Maybe you are looking for