Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

The only thing I can think of is to set the number of days to sync messages, shown below. But I'm not sure if this is what you're after. If it is go to Settings > Mail, Contacts, Calendars select the email account you wish to change.
This will then only sync emails from the last week for example. In the screenshot all email messages would be synced to the iPhone.
Message was edited by: Michael Bratley

Similar Messages

Is there a way to send an email to everyone that is listed in a meeting ivitation

Hi All,
I want to find out if there is an easy way to send a email to everyone that is listed in an event in iCal. At the moment I go through the tedious steps of copying and pasting eveyones email address out of the event.
Thanks

Not with the most common email systems - webmail, POP, SMTP or IMAP.
The only email system I know of that can prevent forwarding (or copying or printing) is Lotus Notes (now called IBM Notes). I believe it can technically be done within an MS Exchange environment, but I have never actually seen it implemented in one.

Is there any way to type your email address so that it would print with the push of one button, like a macro??

Is there any way to type your email address (or any other information) so that it would print with the push of one key -- like a macro?

Take a look at Text Expander:
http://www.smilesoftware.com/TextExpander/

Is there a way to set up email sinc of folders using Windows 7 and Live Mail?

When I got my new computer with Windows 7, I got email on Live Mail. I have not been able to set up sinc with email folders. Is it possible to sinc with these or must I have Outlook? Is this Outlook or Outlook Express? Can I purchase Outlook separately?

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Is there any way to set direction of syncing? I mean from desktop firefox to mozzila's servers or vice versa

Hi
Imagine I have a desktop Firefox and an Android Firefox. I create an account and sync desktop Firefox with Android Firefox. Now I disconnect sync in my Desktop.
For one week sync is disconnected and I changed my bookmarks a lot. After a week I want to sync them again. But if I sync desktop I will lose my bookmarks! actually they return to last week.
What can I do? I must create another account? Is this way reasonable?
I use Firefox 32.0.3 and there is no pair device and other thing that were in previous versions.
Thanks

HI i.akbari,
Thank you for using the new Firefox Sync. The new feature of this sync has a few changes.
Yes, there is only one status for syncing between devices. All of the content is merged and each setting will only sync what you select. It is also not meant to be a back up service, just to sync data between devices.
Please may a local back up of your profile. [[Back up and restore information in Firefox profiles]]

Is there any way to set a calendar event in MS Outlook from Oracle Forms

I need to set and delete events in MS Outlook from an Oracle Form (version 10gR2).
Is there any way to accomplish this?
Thanks

You will need to use OLE on the client, which would further require the use of WebUtil. Here (below) are a couple of MS examples that you would need to convert to pl/sql. There are a variety of Oracle notes which discuss reading and writing to MS Word and Excel. These can likely be used as a starting place to talk to Outlook. There is a WebUtil demo which includes an example of how to write to MS Word. It can be found on the WebUtil home page:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html
<li> http://support.microsoft.com/kb/160502
<li> http://support.microsoft.com/kb/170262

Is there a way to print or Email what I have Highlighted from an iBook on iPad

On my iPad I have highlighted many things in an iBook but now I would like to print them or email them. Is there a way to do that? Thanks in advance

Hey there -
Nope - at least not when printing to PDF. IOS is a tidge, er, limiting.
I re-posted in the IOS area; we'll see what happens there.
Thanks again,
Russ

Is there any way to set up an Airport Extreme that had been previously used in a password protected network and the password was not provided by the seller ?

Background -
My original Airport Extreme Base Station failed (would not connect to the modem). I purchased a similar, if not identical base station on eBay. Unfortunately, the purchased base station apparently was used in a password protected network. For what it is worth, my son gave me a Netgear wireless router, but it leaves a lot to be desired. For one thing, I use to keep the cable modem in the basement along with the Airport base station, with a printer connected to the USB port. The Netgear device does not have a USB port and also requires that the computer (in this case, the eMac) used to set up the network be connected to one of the ethernet ports. This meant I had to move the cable modem and router into my bedroom, a very undesirable situation. It then occurred to me that the original Airport base station Wi-Fi function might still work, and tested this hypothesis and sure enough, the Wi-Fi function does indeed work I currently have both base stations powered on, with my printer connected to the original. Both base stations appear under my Network icon, but neither Airport Utility 5.4.2 or Airport Administrator Utility 4.2 see either base station. I can select the original base station as my network, connect to the printer or even my other computers, but as soon as I try to select the new one, it asks for the password. I would like to somehow reset this base station and then redefine the network name and encryption.

I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

HT1688 I've created a sharing album on Photo Stream. I've entered my husbands icloud email address so that I can share it with him but he is not receiving the invitations. Can you please let me know if I am doing something wrong?

I've created an album on Photo Stream and I've added my husbands icloud email address (subscribers) as well as mine (just to test it out) and invitations say that they have been sent but no emails are generated or received. I have checked my emails spam folder just in case but nothing has been received. Please help!

This does not answer my question. I'm doing everything correctly but no email is generating that asks the "subscriber" to be invited to see my album.

Is there a way to set up email signature cards like other Mac Mail allows?

I would like to set up an email signature for my iPad and iPhone - we're able to do this through Mail Preferences on a computer, but I can't find a way to do this on a tablet device. Any one have any suggestions?

If it is an IMAP or Exchange account that is how those accounts work. If a POP3 account you can't do it.
Gmail can be set up as either but most free accounts are POP3.
Who is the provider for your account?

TA38641 is there a way to set an email address that appears on screen w/ my pass code- so if someone finds my phone they can return it to me?

I just put a passcode on my iPhone to lock it if it's stolen. Is it possible to have my email address appear, so that if it's found by some kind person, they may return it to me? Would at least love a shot at getting it back if I lose it.
Thanks!
~Sarah

You can create a custom image containing contact information and use that as wallpaper on the lock screen. Obviously you'll want to use some "safe" information - a gmail account, another cell phone, etc. - so that someone malicious can't physically locate you from that information or put you on spam lists.
Regards.

I do a radio show, when I pre-record i get a very low end hiss, almost sounds like gain is too high, but its not. If Im live to the station its fine. It only happens when I record. Is there a way to set audition NOT to record that low end sound?

I use an Allen & Heath broadcast board. When I record to my computer for later broadcast there is a low end hiss/hum barely noticeable when im speaking BUT very prominent when there is a quiet moment.
Sounds like gain may be tooo high, BUT its not. When I do a LIVE broadcast using same equipment all is fine!
Thoughts

Well, several thoughts here...
First, what are you using to get from the A&H mixer into your computer and is it in the chain when you broadcast live? I ask because a lot of built in sound cards are pretty noisy and that could be the source of the problem, fixable with even a very cheap external USB interface
Second, if the hiss actually starts at the mic/mixer, I know the A&H XB series has a high pass filter on every mic channel. Have you engaged that?
That said, it's pretty rare for hiss to be such a low frequency that the high pass filter will kill it. You may get on better with the Noise Reduction feature in Audition, applied after the recording.
Anyhow, to repeat how I started, what's your signal chain when recording and how does it differ from when you go live?

I use multiple desktops when running my MBP. Is there any way to set each one up so that it has its own rotating background?

I thought I had it figured out but when I slide over to another desktop it goes to the pic of Yosemite. So far I am only able to make one desktop rotate. Any help or information would be greatly appreciated. Thank you.

My apologies you are right. If you have one desktop switching and the make another desktop also switch then the first desktop does go back to the default.
However if I then go back to the original desktop and make it switch again this time it sticks and I have two desktops switching. In fact at that point any new desktop I add I can make switch and they all stick.
Two screen shoots taken a few seconds apart

Is There any difference in Set @Var=ColmnName and Select @Var =Column from Table. I am using it in SSIs for Dynamic Packages

hey there, Kindly elaborate me the difference Between Set and Select clause while Providing value to a Variable or Even a Column.
    Declare @var nvarchar(Max)
    Set @var= (Select TestName+ cAst(TestId as nvarchar) from TblTest where TestID=1)
    Insert into TblTest(TestName)
    Values (@var)
    Declare @var nvarchar(Max)
    Select @var= (Select TestNAme + Cast(TestId as Nvarchar(MAx)) from TblTest Where TestID=1)
    Insert into TblTest(TestName)
    Values(@var)
Values and result I am getting is Same in Both.
But just wondering if there is any Difference. and if Any which Should I prefer.
And Which one uses less Resources.

I like this article
http://vyaskn.tripod.com/differences_between_set_and_select.htm
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Is there a way to retrieve delete messages and photos that were backed up onto my cloud?

is there a way to retrieve deleted emails and photos that had been previously backed up onto my cloud?

Not unless they were in the camera roll (camera roll photos are backed up). If they were, restoring your backup should recover the.
Photo stream photos are only kept in iCloud for 30 days, even though a rolling collection of up to 1000 photo remain on your device until deleted. Whey you reconnected to your photo stream you only got back the photos from the last 30 days as older photos are no longer in iCloud.
You can keep photo stream photos permanently by saving them to your camera roll.

Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

Similar Messages

Maybe you are looking for