Is there a way to set new default heap size for Java?

Hi,
I have a problem with setting global heap size for installed version of Java. By global I mean that every program that will be run using that version of Java, will be using that amount of memory. for heap. I know that I can use Xmx and Xms for each program that I start, but I don't want to do this. I just want to set some kind of property for installed version of Java.

Launch Firefox and set the web page as wide as you want by dragging the hash marks at the lower right corner. Center the page on your screen where you want it. Then quit Firefox. launch Firefox again. The page should be just where on the screen and sized as you set it prior to quitting.

Similar Messages

How to set the default maximum size for java's heap?

Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!

>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

Is there a way to set a default wifi network for my iPhone 5s?

Hi,
I have two networks in my home. When I first walk in, my phone automatically recognizes my extended wifi network. But since I tend to spend most of my time in the back of the home, I rather have it connect to that network.
Is there a way to change the default?
And no, I can't move the AirPort Base or AirPort Express due to the way the cable is in my home.
Thank you in advance (hope I used the correct terminology).

I have an Airport Extreme upstairs with my computer plus an Airport Express downstairs. They are both defined to be on the same network with Airport Utility. My mobile device use which ever one is giving them the best signal even when I am down in the basement.

Any way to increase the default Heap size for all Java VMs in Solaris 8

Hello,
I have a java product that deals with large databases under Solaris 8. It is a jar file, started by a cron job every night. Some nights it will fail because it runs out of Heap memory depending on the amount of records it has to deal with. I know that I could increase the java VM heap size with "java -jar -mx YY JARFILE" command but I have other java products that are showing the same behavior, and I would like to correct them all in one shot if possible.
What I would like to do is find a system or configuration parameter that forces all Java VMs to use a larger MAX Heap size than the default 16M specified in the Man page for Java. Is there a way to accomplish that?
TIA
Maizo

You could always download the source and modify it.

Is there a way to set a default From address for my iCloud account?

Is there a way to have mail use my .mac address as my preferred iCloud address? I have mail configured to set the From header based on the account I'm accessing, so my work email will come from my work account, and my personal email will come from my personal account. I'd like to keep that configuration.
Unfortunately, I use my .mac address for my personal email, and Apple keeps attaching new, unwanted email addresses to my iCloud account (.mac.com, .me.com and now .icloud.com). Mail somehow sees three addresses on my iCloud account, and defaults the From header to .me.com. For a variety of reasons, including personal preference, I don't ever want to use the .me.com or .icloud.com addresses.
Alternately, is there a way to delete the unwanted .me.com and .icloud.com addresses?
Thanks

I appreciate the reply, but it only gets me partway there. I already have that option set to 'Account of selected mailbox' so that replies to email on my work account (a non-iCloud account) come from my work email address.
My problem is my personal mail is on an iCloud account that, thanks to Apple, now has three email addresses associated with it. So when I reply to a personal email, the 'Account of selected mailbox' option frequently, but not always, chooses the wrong iCloud address for the From field.
Ideally, I'd like to be able to tell Mail that it should use my .mac address for email from my iCloud account, and my work address for mails from my work account. I'd like it to never use the .me or .icloud addresses. I don't think there's an automatic way to do that.
I'll likely end up filing a bug report with Apple.

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!

Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop

Is there a way to set a default solution .runsettings file in VS2013?

This is a question my coworker asked over on StackOverflow
[here], but hasn't received a single comment or answer. Thought I'd repost it here since I know the VS guys are more likely to see it here...
I'm using VS2013 with the built-in unit test framework. I've created a .runsettings file that sits in the Solution Items folder. When I select Test -> Test Settings -> Select Test Settings File, I am able to choose my .runsettings file and it works
as expected.
When I exit out of VS2013 and then re-load the project, I have to re-select the .runsettings file. Is there any way to set the default .runsettings file at solution level so it gets persisted?

Hi,
I can’t get your issue on my side(VS2012 Update 4 machine and VS2013 Update 1 RC machine). If you are using VS2012, please upgrade it to VS2012 Update 4. If you are using VS2013, please upgrade it to VS2013 Update 1 RC.
When I restart VS and re-load the project, the .runsettings file is still selected
with the Select Test Settings File menu option and .runsettings file is still used when I run the unit test.
I doubt that there is anything wrong with your VS. As I mentioned above, please reset your VS settings through Tools->Import and Export settings->Reset all settings…
If no help, try some other devenv commands to fix:
1.devenv.exe /safemode
2.devenv.exe /resetskippkgs
3.devenv.exe /installvstemplates
4.devenv.exe /resetuserdata
devenv.exe can be located under your VSlocation/Common7/IDE
What your need is to put it to run prompt and add commands to it.
If the issue still exists, please repair or reinstall your VS.
Meanwhie, if you have some anti-virus software running when you work with VS, please close them to check the reuslt.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a way to set the default length of appointments/events to 1 hour?

Is there a way to set the default length of appointments/events to 1 hour?

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
Also, if we bought a song in future we would want to be able to both have access to it.
Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
Thank you in advance.

FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
ecbclb wrote:
Will we have to create a seperate account for her, or can we all have the same one?
You can but you will not be able to limit what she syncs.
I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
I don't recommend using (only) the checkmarks to select what to sync.
Each of you can create your own playlists then sync only those playlists.
Then add/delete from your own playlists to change iPod content.
The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
You and your husband can share an iTunes library and let your daughter have her own.

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way of setting up a sub account for her, or do I have to set of husband playlists and a separate set of wife playlists?

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way to set up a sub account for her, or do I have to set up a set of husband playlists and a set of wife playlists?

Sorry, but that's not possible.
You can share iTunes libraries on a network > iTunes: Setting up Home Sharing on your computer

Is there any way to set global language as english for users in portal

Hi,
Is there any way to set global language as english for all the users in portal (for all the screens,applications etc) irrespective of browser settings,language in jco,user settings in backend .
the reason why i am asking is we are implementing global implementation project and for some users in switzerland because of their browser is not english they are getting language other than english.we dont want to ask each user to change their browser language.we just want to force the portal to display content only in english
Thanks
Bala Duvvuri

Hi ,
You can add property 'request.mandatorylanguage=<your_language>'
and property 'request.mandatorycountry'
on file 'prtDefault.properties' located in :
..server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\system\properties\prtDefault.properties
Then restart the server.
See :
http://help.sap.com/saphelp_nw70/helpdata/EN/42/938297a5061d69e10000000a1553f6/frameset.htm
Regards,
Gilad

What is the best way to verify default heap size in Java

Hi All,
What is the best way to verify default heap size in Java ? does it vary over JVM to JVM . I was reading this article http://javarevisited.blogspot.sg/2011/05/java-heap-space-memory-size-jvm.html , and it says default size is 128 MB but When I run following code :
public static void main(String args[]) {
int MB = 1024*1024;
System.out.println(Runtime.getRuntime().totalMemory()/MB);
It print "870" i.e. 870 MB.
I am bit confused, what is the best way to verify default heap size in any JVM ?
Edited by: 938864 on Jun 5, 2012 11:16 PM

938864 wrote:
Hi Kayaman,
Sorry but I don't agree with you on verification part, Why not I can verify it ? to me default means value when I don't specify -Xms and -Xmx and by the way I was testing that program on 32 bit JRE 1.6 on Windows. I am also curious significant difference between 128MB and 870MB I saw, do you see anything obviously wrong ?That spec is outdated. Since Java 6 update 18 (Sun/Oracle implementation) the default maximum heap space is calculated based on total memory availability, but never more than 1GB on 32 bits JVMs / client VMs. On a 64 bits server VM the default can go as high as 32gb.
The best way to verify ANYTHING is to address multiple sources of information and especially those produced by the source, not some page you find on the big bad internet. Even wikipedia is a whole lot better than any random internet site IMO. That's common sense, I can't believe you put much thought into it that you have to ask in a forum.

Is there a way to set the default reminder to "two days"?

When I switched from iCal to iCloud Calendar I lost the ability to have all reminders set to 2 days! Is there a way to set this as the default for iCloud Calendar?

That's only possible with events.

Is there a way to set new default heap size for Java?

Similar Messages

Maybe you are looking for