Is there a way to set the iPhone to have a black screen with white text?

I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?

I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8

Similar Messages

Is there any way to set the iPhone 4s Calendar to display holidays?

I was just wondering if there might be a way to set the iPhone 4s calendar to display holidays?

If you want US holidays, you can add a subscribed calendar to your phone as described here: http://www.knowyourcell.com/apple/apple-iphone-4/iphone-4-guides/506391/how_to_a dd_us_holidays_to_your_iphone_4_calendar.html. Then in iCal on your phone, tap Calendars (upper left) and make sure the US Holidays calendar is checked, then tap Don (upper right).

IPhone 3GS Crashes (gets Black Screen with White Apple Logo) Mid Phonecall

For the past week, when I make a phone call and use the speaker, after the call has lasted between 8 and 12 minutes; without warning, everything goes quiet and I get a black screen which displays the white Apple logo (the same as is displayed when you reboot your phone).
After a while, the phone comes back on, I’m not required to enter my SIM Pin and everything seems to work fine(ish) from then onwards.
I have done a reset, restore and resync in iTunes, but this still happens.
It does not seem to matter if the battery is 100% charged or not! I have tried a few battery recalibrations too!
I’ve also noticed a slight sluggishness since the upgrade to iOS4 (for example, when you receive a text message, click to view, there is a noticeable delay where the screen is blank (you can see the lines where messages should be) and then they appear/message opens).
Any ideas?
Cheers in advance.

Hey Mac Beep Beep,
As did many out there on iOS4 release day, I plugged my iPhone into the PC, iTunes fired up, the software upgrade was found and installed.
Three iPhones updated in my household, all the same model (3GS 32Gb) and yet none of the others have had the same problems as mine.
On top of having the reboot during phonecall issue, my calendar (historic and future) was wiped, birthdays were added to the calendar from the information held in contacts however some (not all) were showing as a day earlier then they should be (even though they are correct in the contacts entry).
Just to clarify, when I tried to reinstall a verified version of the legacy backup (3x), I used iTunes to reset iPhone, re-active iPhone and restore said legacy back up. This failed in a spectacular way so I had to go back to an iOS4 back up.
Note: I had the problem of phone rebooting mid phonecall before I attempted a rollback to 3x.
Any further advice/ideas?
Cheers

I bought an ipad mini from John Lewis in February. On Saturday the ipad suddenly stopped working. I tried charging it but all it done was go to the start up apple page (black screen with white apple) then shut down and constantly repeat this process.

I took it back to John Lewis today to get fixed as its still under warranty. Because there was scratches on the back of it.... Which is hard to avoid with the slate back!!! I got told apple will probably not fix it as it looks as if I've done it! I couldn't believe it!! If I honestly dropped it that bad to have caused a technical fault inside I would of smashed the screen as the same time!! Absolutely ridiculous as I know it isn't through any fault of my own.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Is there a way to set the control panel in assistive touch?

I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

TS1369 i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes

i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

# Question
In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Acrobat or Reader: Is there a way to set the print scaling default at the application level?

Is there a way to set the Page/Print Scaling to a default at the application level? For Acrobat and Reader?
Thanks,

Often asked, but that feature retains the last used local setting.
You can however, change the default for Documents, individually, in their Properties > Advanced tab

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!

Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view?

I'm used to the way Finder display the folders on Mac(Column view). I would love, if its possible, to have the option to set the Folders window in Bridge to Column view:
Finder Column View:
Instead of Bridge List view:
Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone also on) but off for everything else?

I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone) but off for everything else?

Short answer: No. Long answer: Nope
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
WYSIWYG No hidden settings.
If you want to suggest this to Apple:
http://www.apple.com/feedback/iphone.html
Message was edited by: modular747

Is there any way to set the SCCM system to use local time instead of UTC?

We have ConfigMgr 2012 in our environment. We are in EST.
Is there any way to set the SCCM system to use local time instead of UTC?
When we try to deploy packages, if you don’t specify the time, it reverts to UTC which for us is off by 5 hours.

Which times are you talking about? Deployment start times or deadlines? Those could be set to UTC *or* client local time.
Torsten Meringer | http://www.mssccmfaq.de

Is there any way to set the home page as an app tab?

Opening a new window with my homepage set as an app tab still generates a new homepage. Is there any way to set the home page as an app tab?

Hi,
Try File / Save As. Select "Page Source" from the Format pop up menu.
Carolyn

Is there a way to set the default length of appointments/events to 1 hour?

Is there a way to set the default length of appointments/events to 1 hour?

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to set the iPhone to have a black screen with white text?

Similar Messages

Maybe you are looking for