Is there a way to set up a playlist for Apple TV 2?

Is there a way to make a playlist for the Apple TV 2?

Welcome to the Apple Discussions.
Only from iTunes on your mac/pc I'm afraid.

Similar Messages

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Is there a way to set Minimum Time Requirement for a course?

Is there a way to set a minimum time requirement in a Capitvate 5 course?
For example, the learner must be in the course for a minimum of 30 minutes or the course can not be considered "complete." This is a SCORM course and the learner's record in the LMS will not show the course as complete until the learner has been in the course at least 30 minutes. (This minimum time requirement may or may not be in conjunction with also passing a test with 80%. for example, in order to be considered complete, the user must be in the course for at least 30 minutes AND pass test questions with a score of at least 80%)
Perhaps some modification of the Timer Widget described by Lilybiri at http://bit.ly/ep5cOY?
Or, some modification of the SCORM Manifest?

Lilybiri,
Thanks to your 2 articles on variables and advanced actions as well as a few other resources (listed below) I was able to get up-to-speed enough on Adobe Captivate variables and advanced actions and implement your solution 90%.
The last 10% is...
You had recommended in Step 2 to "Attach a score of 0points to the CBNo and a score of 100points (just an example) to the CBYes."
My question is, how do I attach points to the buttons? Is "score" a system variable? Also, is there anything special I need to know about these attached points in terms of how they will be communicated to our LMS using SCORM protocol?
And as a final thought....
If someone exits the eLearning and then re-enters the next day, I think that the cpInfoElapsedTimeMS will reset to zero, is that correct? Is there way for the project to remember what the cpInfoElapsedTimeMS was? We are using this in conjunction with an LMS using SCORM, if that is helpful.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RESOURCES FOR LEARNING ADOBE CAPTIVATE VARIABLE AND ADVANCED ACTIONS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In case anyone else needs to get up-to-speed on Adobe Captivate variables and Adobe Captivate Advanced Actions (for Captivate 5), here are the resources I used. Hope others find them helpful useful as well.
Lilybiri:
Article 1: "Use Power of Variables in Captivate 5 (4) - without advanced actions": http://kb2.adobe.com/community/publishing/862/cpsid_86299.html
Article 2: "Unleash Power of Variables in Captivate (4&5) with Advanced Actions"
http://kb2.adobe.com/community/publishing/871/cpsid_87182.html
http://lilybiri.posterous.com/unleash-the-power-of-variables-in-captivate-5
Adobe Webinar by Vish at Adobe:
"Using Advanced Actions & Variables in Captivate 5" http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1808722&loc=en_us
CP Guru
"List of Adobe Captivate 5 System Variables" http://www.cpguru.com/2010/07/20/adobe-captivate-5-system-variables/
If you scroll to the bottom on the webpate, you can download a beautifully formatted PDF

Is there a way to set the default view for the App Store to only show Apps for iPads when the Store is launched?

I'm a new iPad owner and would like to set the default view for myself to show only Apps for the iPad when I launch the the App Store app. Showing apps for iPhone seems a waste of real estate for me and time spent searching for a particular app since I do not own an iPhone.
Thanks for any assist. :-)

Hi ..
That's not possible as yet but you can provide feedback to Apple here.

Is there a way to become a product tester for apple?

So there a way to become or appy for testing iPhones ? I'm a UPS driver and am in a good posstion to put a iPhone thru a vigorous test of everyday life in the working world.

Even if there were, you wouldn't get to Apple through here. We are all users just like you.
And anyway, that kind of testing would likely be done internally within Apple, by Apple employees.

Is there a way to set off contra amounts for vendors and customers?

Hi i would like to know whether there is a way in B1 to set off the contra amounts for a business partner who is both a customer and a vendor in B1? If so how?

Hi Savindi,
version 2007 fully supports multiple BP internal reconciliation, you are hence able to offset transactions of 2 separate BP codes against one another.
Both 2007 A & B are in general availability, please see the appropriate landing page on the SMP.
All the best,
Kerstin

Is there a way to set two different settings for the backlight?

I was wondering if there is a way for me to set the backlight to always on when watching videos on my 5G 30 gig iPod and off when doing anything else?
Or do I have to manually go in and change the setting everytime?

The backlight will always be on when watching videos. This is automatic, regardless of the setting.
btabz

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Is there a way to set default build-in for a presentation?

There seems a major regression in the most recent Keynote. I used to be able to edit the master slides I use to add build-in animations, so that all my slides would build in in the same way. But when I try to do that now, it says "animations aren't available on master slides".
Can this be done?

I'm not going to lie. At first I was extremely disappointed that they removed transitions from master slides. I used it all the time.
After fiddling with it for a while, I think I'll be fine . I still use the master page for layout and formatting, but I then just create some template-like slides with the transitions based off the masters. You can then create a new slide by duplicating a template and customizing it. Once you're done, you can tell Keynote to "skip" the template slides so they don't show up in your presentation.
Here's the nice thing I've found. After you've customized a lot of slides based off of a master, then change the master, it doesn't change your transitions. I used to have to go in and fix a ton of transitions after updating the master slide.
Hopefully this is a decent alternative for Keynote master slides with transitions.

Is there a way to set pixel aspect ratio for a project?

This is related to another post I made about using iShowU HD, a screen capture program (for screen casts). On their support page, they show example settings for FCP, but not for FCP X. I was wondering if someone could take a look at that page and decypher that for FCP X. One thing the specify for FCP is to set the pixel aspect ratio to "square pixels", as well as some other things. Also, is it good to use 30 fps?
This is the support page:
http://help.shinywhitebox.com/workflow/final_cut/
Thanks

Set capture size:
Set output video:
Set frame rate:
Set capture options:
Set video and audio format:
Set up the FCP X project:
1080p HD / ProRes 422 / 48kHz...

Is there any way to set a bookmark folder for firefox 5 to use automatically?

I am at present looking at a site with 5000+ items and I will probably be bookmarking quite a few so can I create a shortcut to bookmark to a specific folder?

See if this extension helps you. I don't use it myself, but I think it may help you mainly by virtue of having a larger window showing more bookmark folders than the default "Page Bookmarked" window.
Add Bookmark Here ² : <br />
https://addons.mozilla.org/en-US/firefox/addon/3880

Is there a way to set up unique alerts for unique text messages?

I have a need to be able to identify text messages from a specific sender. I currently can only find one message alert sound for all messages and want to be able to give certain senders a unique sound. Is this possible on the IPhone?

.. go into "Contacts" on your iPhone.. select a contact.. then scroll down and select the ringtone for either text messages and/or phone calls.

Is there a way I can create a playlist for my TV Shows purchased from iTunes?

Hi Guys,
Recently upgraded to IOS7 and my video app has changed. I use the ipad in the car for my daughter and play a series of pepper pig continuously. However, with the new upgrade the option to play all epps in folder is not there anymore, it only allows you to play each eppisode indiviuadly and thats it.
Can anybody please tell me if they've manage to play all TV Show downloads from Apple in a playlist? Its impossible to use the ipad in the car now as I would have to pull over every 5 minutes.
Thanks in advance.

See here: Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
B-rock

Is there any way i can leave a suggestion for apple products

i would like to know why are we as the customers of apple not given the option to switch between pc's and manage music,videos , etc.on to different itunes with our i phones in my paticular situation the iphone 5 i would like to know if its possible to get it added to the iphones software. thank you.

You can provide Apple with feedback on this here:
http://www.apple.com/feedback/

Is there a way to set up two separate apple id's for imessaging with IOS 6?

My wife and I have the same Itunes account and we have turned off each other's devices on our own devices (so her phone does not receive my imessages and vice versa) but is there a way to set up a whole new Apple ID just for Imessages while keeping the same Itunes account for other things so her phone does not appear as a choice under my "send/ receive" options?
If that is not possible, is there a way to assign a new Apple id/Itunes account to one of our phones to keep them separate?
Thanks in advance for any suggestions regarding this topic.

Hi...
The recomended way of setting up Applleds is to have one common one for "the Stores" (iTunes, App Store & Mac App store) so that all purchases are shared, then a seperate individual account for iCloud syncing EACH
So for instance you'd have [email protected] for the stores and [email protected], [email protected] [email protected] & [email protected] for the individuals
Thats' what I've done here for myself, mrs & 4 kids.
Regards,
Shawn

Is there a way to set up a playlist for Apple TV 2?

Similar Messages

Maybe you are looking for