Is there a way to set window dimensions before publishing project as standalone from Aggregator?

Hi,
I am combining several SWF files using aggregator and publishing it as a Standalone (.exe) File type. The executable works fine and displays all the files as expected. The expectation from the customer is to have the ability to maximize, minimize the window of the executable. Is there a way to set the dimensions before publishing the standalone. Currently, I am able to minimize or close the window and not maximize the window of the exe.
P.S - I am using Captivate 4.
Thanks,
Latha

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Similar Messages

  • Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

    I'm using RoboHelp 9 with WebHelp output.
    I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
    I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
    Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
    If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
    If RH supports multiple browse sequences, what is the workflow?
    I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
    Carol

    Me again, Carol
    You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
    I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
    The behavior of Browse Sequences as explained above
    The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
    As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
    As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
    Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    Evergreen, Colorado
    www.showmethedemo.com

  • Is there any way to set up a system in Numbers where numbers from individual spreadsheet can get funneled into a Master Spreadsheet to calculate the total of all of the individual spreadsheets automatically?

    I use Numbers for my business and I currently use it to create individual invoices and then (manually) enter the totals from the invoices into a Master Spreadsheet where I can see the sum of the individual totals.  Is there anyway to set up a formula or a system that automatically funnels the numbers from the Individual Spreadsheets into the Master Spreadsheet to calculate a total?

    Marni,
    If you can tolerate all the data and the summary being in a single document, this can be done. Any cell in a document can reference any other cell in the same document for the purpose of making a summary or other calculations.
    Jerry

  • Is there a way to set the FOLDERS window in Adobe Bridge as a Column view?

    I'm used to the way Finder display the folders on Mac(Column view). I would love, if its possible, to have the option to set the Folders window in Bridge to Column view:
    Finder Column View:
    Instead of Bridge List view:
    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?

    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
    No, but it is very nice idea, add it to the feature request page:
    http://feedback.photoshop.com/photoshop_family/

  • Is there any way to set up icloud with Windows XP?

    Is there any way to set up icloud using a PC with windows XP?

    Yes there is.
    There are many threads on this forum discussing this issue already (it's good to search before asking the same quesiton again).
    There is a simple hack to get iCloud control panel to work on Windows XP to give you synced access to Contacts, Calenders, Reminders and Bookmarks. It also can be used to set up your me.com mail. Photostream doesn't work.
    I found a solution here, have written it up in clearer english and added details re IMAP support for me.com addresses here:
    http://xlii.be/s/1ii
    In summary:
    You need:
    Unpacking program e.g. 7-Zip or WinRar
    Orca MSI editor
    The iCloud setup hack for Windows XP:
    Download iCloud Control Panel for Windows.
    Open iCloudSetup.exe file with WinRar or 7-Zip and extract.
    Navigate to and open the iCloud.msi or iCloud64.msi (for 64bit systems) with Orca.
    In the left table select LaunchCondition. Then change in the right table “VersionNT> = 600” to “VersionNT> = 200” and Save.
    Run modified iCloud.msi and install.
    Run iCloud Control Panel, located in the Windows Control Panel, and set up as you want.
    I've had reports that you need to keep the files extracted from the .exe file in the same directory during installaton of the .msi file.
    Have fun!

  • Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

    When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
    Is there a way to set the default Source Range to something besides Sequence In/Out?
    My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
    I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap". 
    For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
    Now here's that same in/out in "Lighter Appearance":
    Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
    Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
    So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
    Thank you!

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

  • Is there a way to set the iPhone to have a black screen with white text?

    I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
    The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
    And when I view my photos in Photos, these are also inverted as well.
    Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
    be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
    normal coloring?

    I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
    Invert Colors and Grayscale
    Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
    Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
    See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
    Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
    copied from page 151 of the user guide iOS8

  • Is there a way to set the control panel in assistive touch?

    I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
    No, but it is very nice idea, add it to the feature request page:
    http://feedback.photoshop.com/photoshop_family/

  • Is there any way to set default column widths in the Finder's Column view

    When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
    <Re-Titled By Host>

    No, because you can't set a columns view default.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Is there a way to set firefox so it only allows access to only one website / (ip address).

    Is there a way to set firefox so it only allows access to only one website / (ip address) and block traffic from everything else (the entire web) other than the one site I want to allow? The site I want to allow is a corporate web application that will only work in firefox. We as a business run a windows server and all client desktops run Internet Explorer with security setting controlled by group policy. We have already locked down the security setting in firefox so users can’t bypass the proxy server settings.

    I have a proxy server set up (Symantec.cloud). Fire fox is “locked” so users would find it difficult to bypass it.
    I have a file: '''local-settings.js '''
    This is located in: C:\Program Files (x86)\Mozilla Firefox\defaults\pref
    The content of this file is:
    ''pref("general.config.obscure_value", 0); // only needed if you do not want to obscure the content with ROT-13
    pref("general.config.filename", "mozilla.cfg");''
    I also have the file: called: '''mozilla.cfg'''
    This is located: C:\Program Files (x86)\Mozilla Firefox
    The contents of this file is:
    lockPref("network.proxy.type", 5);
    All that is working fine, users can’t easily change the connection settings.
    So all that is good and works…
    What I would also like to do is set firefox so access is limited to 1 IP address and nothing else is allowed (the whole internet is blocked, except this one IP address).
    You suggest using a PAC file - I was unsure how I would use a PAC file, (I have never written one) and do not understand how I would implement one? Please help.

  • Is there a way to set markers at the clipping points?

    Hi
    is there a way to set markers at the clipping points?
    thanks

    Don't think you can go any lower than that in any normal design program as there always needs to be a common base reference for all internal calculations like image resizing, font rasterization etc. and traditioanlly it has always been assumed to be 72 DPI. Still, I don't think that it is a problem. Any such stuff no doubt would be handled by the printer driver of the device, meaning it would reinterpret your 72 DPI graphic as 20 DPI and map each "pixel" 1:1. You may just need to design at smaller absolute dimensions...
    Mylenium

  • Is there any way to set column width is GridaBagLayout?

    Is there any way to set it up like tables in html - where you specify the width and height of the cell and then place the component inside it - with the component not resizing the cell unless it is larger than the cell area?
    Thanks.

    Thanks Paul, please excuse the sarcasm - I just found your recommendation funny. I actually found some examples of Box.filler and have created a method for adding one for each column I want:
    public void addFillerColumn(int width, int height, int colNum, int rowNum )
    panel.add( new Box.Filler(new Dimension(width,height),new Dimension(width,height),new Dimension(width,height)),
    new GridBagConstraints( colNum, //gridx
    rowNum, //gridy
    1, //gridwidth
    1, //gridheight
    0, //weightx
    0, //weighty
    GridBagConstraints.WEST, //anchor
    GridBagConstraints.NONE, //fill
    new Insets(0,0,0,0), //insets(, left,,)
    0, //ipadx
    0 )); //ipady*/
    }

  • Is there any way to set the home page as an app tab?

    Opening a new window with my homepage set as an app tab still generates a new homepage. Is there any way to set the home page as an app tab?

    Hi,
    Try File / Save As. Select "Page Source" from the Format pop up menu.
    Carolyn 

  • Is there a way to set the printed margins to zero. I want to fill the whole page, as much as the printer allows.

    Normally Firefox prints Title, URL, time and page number on the four corners of the printed page. I want to remove printing of this
    information and instead print the page out to the corners limited by
    what the printer allows. I know how to stop printing the URL etc. but then I get empty margins. I want to set this margins to zero so Firefox prints on the whole paper sheet. As it is now I will have to use another browser that doesn't insert unwonted margins.

    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
    No, but it is very nice idea, add it to the feature request page:
    http://feedback.photoshop.com/photoshop_family/

  • My husband and I are using the same computer. He has a ton of songs in iTunes that I don't want...but when I sync my iPod I get all of his songs too. Is there a way of setting up another ITunes account without having to untick all of the ton songs iTunes

    My husband has a ton of songs in iTunes that I don't want on my iPod nano. Is there a way to set up a separate account on the same computer in iTunes? Do I have to un-tick all of his songs (would take forever!! And then he would have to tick them again)....when we sync our iPods?

    No. Its not possible.
    Alternatively, create another user account in your computer. Install iTunes in that account with the library you wish to sync.

Maybe you are looking for