Is there a way to tell Lightroom where to put Mobile Uploads from Lightroom Mobile app?

Thanks!

I know what you mean (image below). They go in the Lightroom folder, under pictures, in a randomly named folder. You can always drag them from this folder into your catalog, but I don't know of any way to reset the location or name of the folder. It is a different random name for each mobile device you connect (in the example shown, I have two iPhones and an iPad).
mh++

Similar Messages

Is there some way to tell lightroom to just re-export the previously exported files?

Shot a celebration (Park, Mass and Party), went home and processed the raw files in Lightroom, Exported them into 3 folders.
Then I proceeded to edit the files in photoshop, first folder that consisted of the park went well. Files looks great, even after compressing them again.
Then up were the Mass pictures and that's where it all went down hill. When I loaded up the first image it was compressed to hell All the black areas were all pixelated, so I went into lightroom and sure enough it changed the quality from 100% down to 60%!
All my other settings were the same so I didn't accidentally reset the whole thing. Not sure why or how Lightroom did this, I've had it on 100% for the past 2 years!
Now I have to export them all over again, the trouble is there was 800 that I culled down to just 150. I really don't want to hand pick them all over again.
Is there some way to tell lightroom to just re-export the previously exported files?

The short answer: no.
Lightroom remembers recently imported files in a collection, but does not remember recently exported files.
That said, you could use the SQLiteroom plugin (free, by me) to round up a collection of *all* exported files, which might help.
Rob

Is there any way to tell Lightroom not to make subfolders?

Okay I'll try to explain what I'm trying to do: On my external drive is a folder called Digital Photos and inside that is two subfolders; RAW Files and Final Versions. Then there is another folder on my drive called New Photos RAW Files. What I've been trying lately is when I'm done shooting some new photos I transfer the new ones to the New Photos RAW Files folder.
Then I start Lightroom and tell it to import the photos from the New Photos folder into the program. What I would like to be able to do is tell Lightroom to rename these new photos with my naming scheme I came up with and store then in the subfolder RAW Files which is in the Digital Photos folder.
But I noticed that Lightroom likes to always create new subfolders for you. So what happens is Lightroom renames the new photos and puts them in a subfolder named 05-15-2001 (or something similar to that) and that folder is placed inside another folder called 2011.
I don't really need these subfolders being created so I was wondering if there is a way to tell Lightroom to simply take the new photos and after you rename them simply place them in the RAW Files folder which is inside the Digital Photos folder.
I hope I've made myself clear and I admit I'm just a newbie at this and it's hard to get the hang of this powerful software.

It appears I have figured it out. You gotta go down to where it says Destination and tell Lightroom to Organize into One Folder.

Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

'''Here is an update to my former response.'''
Here is a safe way to look at an email which you think is suspicious:
* right click on the message and select 'Save As'
* the file name will be the email subject followed by an extension of .eml
* store it in a folder you can find easily, such as your Documents
* using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
* even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

Is there any way to tell Airport to select the strongest network from saved networks?

I have two routers in my house as both are fairly crap, and essentially I have one router for upstairs and one for downstairs (to be fair, my house is a few hundred years old and all the walls are massively thick granite so perhaps no router would negate this problem). This is a minor issue really, but is there any way to tell Airport, rather than simply having a list of networks to try in preferred order, to check which of the two networks has a stronger wifi signal when the mac is booted up or woken from sleep, and join that one?
Don't mind doing it manually tbh, just curious as to whether this could be automated.

Hmm, this is interesting. I actually didn't know this.
From:
http://www.macobserver.com/tmo/answers/4-wi-fi-tips-from-former-apple-wi-fi-engi neer
"Apple devices choose networks by your preferred order. Period. If you have multiple networks of different names your Mac or iPhone will always choose the first in your iCloud-synced "Preferred Networks" list even if this one isn't going to give you the best bandwidth. If you have the network name/SSID the same then it will chose the radio that it predicts will give the best throughput (which isn't always the one with the best signal, but that's an even geekier discussion you can hear in the show). Make all the Wi-Fi networks in your home the same. Your life will be better for it."
Maybe I've been working on too many PCs over the last 5 years.

Is there a way to include S/MIME encryption on messages sent from the Photos app?

I have encryption set up and working on my Exchange account, but I also want to send attachments with the encrypted messages. When I try to send images as attachments by selecting the "share" option in the Photos app,the message that is created does not indicate encryption. Is there a way to attach files in the Email app without going through the Photos app? Or is there a way to apply envcryption to the Photos app email configuration?

If you want the virtual device to work you are going to need NI-DAQmx. DAQmx has all the information that "virtual device" needs to actually run, be testable, etc.
StuartG

Where to put mobile apps

I just did a clean install of snow leapard. Where should I put my mobile apps? Path please. I moved the library etc, but the apps tells me cannot find.

I know what you mean (image below). They go in the Lightroom folder, under pictures, in a randomly named folder. You can always drag them from this folder into your catalog, but I don't know of any way to reset the location or name of the folder. It is a different random name for each mobile device you connect (in the example shown, I have two iPhones and an iPad).
mh++

Is there a way to tell what is actually being passed to DB from PreparedSta

Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
(there are x ?s)
I precompile this, and later, when there is a connection I call set all the variables
prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
So I made a string that contains what ought to be the same query
String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
Thanks for any help you can give me.

Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Is there a way to create forms where certain fields would become required only if there was a certain choice made in a dropdown box in another field?

Is there a way to create forms where certain fields would become required only if there was a certain choice made in a dropdown box in another field?

Yes but you will have to create some custom JavaScript to do this.
Also you should be aware that the "Required" property is only processed when the form is submitted to a scripted web page or "mailto:" process.

Do I need to be worried? Is there a way to tell if I have a bad MacBook?

Hello all,
I just picked up a used MacBook Pro from a friend for $650. It is within the dates that there was the issues with the video chipsets from NIVIDIA. This notebook was not used that extensively, I don't think, so I am not sure if I am in the clear regarding this issue or not. Is there a way to tell if this MacBook is covered under he known issue even though it is beyond all coverage. It notes that if the issue appears within the 1st 4 years of purchase, it will be covered. Is this the best that they can do? Or can an apple guy run something on the system, or look up my S/N# and tell me if I have a notebook with the issue?
Reason I ask is to known whether I need to use this for the purpose I bought it for, or if I can rely on it as my main notebook as well.
Thanks for all, or any, help that someone on here can be. Love this notebook (and only had it for a few hours), but just wondering how much it can be trusted, or if there is a way to know.
Thanks you guys...hope I will be welcomed to the MAC club, as I have NEVER owned a MAC until now!
Message was edited by: traitor

Hi t,
traitor wrote:
Hello all,
I am not sure if I am in the clear regarding this issue or not.
You won't be sure until the day you stop using it or it develops issues.
Is there a way to tell if this MacBook is covered under he known issue even though it is beyond all coverage. It notes that if the issue appears within the 1st 4 years of purchase, it will be covered.
Correct. NVIDIA issue
Is this the best that they can do?
At this point, it is what it is. Anything beyond this would be at Apple's discretion, on a case-by-case basis.
Or can an apple guy run something on the system, or look up my S/N# and tell me if I have a notebook with the issue?
You've already noted that your MBP falls within the range. It does have the GPU that may develop the issue. If the issue is occurring now, their test will show it. If the issue is not currently occurring, the test will not show it. The test tests whether or not the issue is occurring, it's not a predictor as to if/when it will occur. Some GPUs within that range will not develop the issue.
Reason I ask is to known whether I need to use this for the purpose I bought it for, or if I can rely on it as my main notebook as well.
I would feel comfortable using it as my main computer (I have a MBP that also falls in that range), but this computer or any other in the world could develop issues at any time. I backup frequently and in different ways and strongly recommend that you do, and everyone else does too. Every HD will die at some point in ongoing use. Some will take seconds, some years. Some will give notice, some not. Some will leave platters with recoverable data, some will have the platters gouged by failed heads, with little to no recovery possible. The only safe computing is by backing up data (and although I've never had to resort to it, having a second machine available; I keep most of my "old" Macs, so if my "main" machine would ever go down, I can just grab my data from a backup and keep going).
Thanks for all, or any, help that someone on here can be. Love this notebook (and only had it for a few hours), but just wondering how much it can be trusted, or if there is a way to know.
Heat is a big enemy of electronics. Monitor periodically with iStat Pro. Fans should speed up long before CPU hits thermal shutdown range of 100C.
Message was edited by: tjk

Is there a way to tell what settings were used to export a PDF?

Is there any way to tell what export settings were used to create a PDF? I'm trying to recreate settings used in a previous PDF.

Most of which are controlled by the Export options used;
Description
    KK Stevens
PDF Preset: CC to PDF for KKSPC-Flattened
Compatibility: Acrobat 4 (PDF 1.3)
Standards Compliance: None
General
    Pages: All
    Spreads: Off
    Generate Thumbnails: On
    Optimize PDF: Off
    Create Acrobat Layers: N/A
    Export Layers: Visible and Printable Layers
    Include Bookmarks: Off
    Include Hyperlinks: Off
    Export Nonprinting Objects: Off
    Export Visible Guides and Baseline Grids: Off
    Create Tagged PDF: Off
    Interactive Elements: Do Not Include
Compression
    Color Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Grayscale Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Monochrome Images
        Downsample at: 1200 ppi
        for images above: 1200 ppi
        Compression: CCITT Group 4
    Compress Text and Line Art: On
    Crop Image Data to Frames: On
Marks and Bleeds
    Crop Marks: Off
    Bleed Marks: Off
    Registration Marks: Off
    Color Bars: Off
    Page Information: Off
    Page Mark Type: Default
    Weight: 0.125 pt
    Offset: 0.125 in
    Use Document Bleed Settings: Off
    Bleed Top: 0.125 in
    Bleed Bottom: 0.125 in
    Bleed Left: 0.125 in
    Bleed Right: 0.125 in
    Include Slug Area: Off
Output
    Color Conversion: No Color Conversion
    Destination: N/A
    Profile Inclusion Policy: Don't Include Profiles
    Simulate Overprint: Off
    Output Intent Profile Name: N/A
    Output Condition: N/A
    Output Condition Identifier: N/A
    Registry Name: N/A
Advanced
    Subset Fonts Below: 1%
    Omit PDF: Off
    Omit EPS: Off
    Omit Bitmap Images: Off
    Transparency Flattener Preset: [High Resolution]
    Ignore Spread Overrides: Off
Warnings

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process.

Is there any way to find out where a standard text is used?

Is there any way to find out where a standard text is used?
We can see the text from SO10, but i want to find out where it is used.

HI
juct check out this thread
How to find Standard Text
a similar query is answered here
hope this helps
regards
Aakash Banga

In the Lync Database, is there a way to tell if a call has been answered or gone to voicemail?

We are using Lync 2010.
In Lync, if a call is not answered, and does not go to voicemail, is anything recorded in the Lync database ?
It looks to me as if nothing is recorded in the database, but I was wondering if there is an option in Lync configuration to make Lync record such activity in its database.
Is there a way to tell from the LYnc database if a call was answered by a person or went to voicemail
I have been looking at the LCSCDR database, at the sessionDetails table, but cannot see a way of distinguising between these scenarios.

Nothing is recorded if the call is not answered and does not go to voicemail. This is a source of frustration for me, and there is no way that I'm aware of to record this information to the LCSCdr database.
To see if voicemail answered, you want to look at the client version that answered the call, voicemail will say ExchangeUM. You can see me messing around with this in the below example, pulling from SessionDetails.User2ClientVerId and matching against
the ClientVersions table.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is there a way to tell Lightroom where to put Mobile Uploads from Lightroom Mobile app?

Similar Messages

Maybe you are looking for