Is there a way to tell where someone is logging in from?

Here is question regarding a client that is moving their operations to India. I was just curious if there is a way to tell where someone is logging in from?
While each user on the system is provided with a unique userID and password, the potential exists that someone outside the U.S. could use the id and password from an offshore location. Is there way to reliably find out where the user is coming from?
Thanks

This site provides solutions which are pretty useful for what you're attempting to do:
http://www.maxmind.com

Similar Messages

  • Is there any way to tell if someone has cleared and reused a lost Ipod touch? Or will it continue to show up as offline in Find Iphone app?

    I have the app Find Iphone, and my kids' ipods are linked to the app because we share an itunes account. My son cannot find his ipod, in which, he took it on a mini-vacation with friends. He never took it out of their vehicle, but it may have fallen out at some point, just not sure. When I check my app, it simply reads offline. I want to know if there will be a way to know if someone has reset it (even if I cannot locate them)? I don't want to keep wasting my time looking to see if it somehow was connected to the internet when it has already been cleared. Help pleased?

    Will it continue to say that the device is in lost mode if it has been restored?  My Find Iphone is saying that when the device is connected to the internet that it will be locked and that a message (that I typed in) will appear. It also says that I will be notified and that a sound will occur when it is connected. Now my iphone has been updated to the ios7, but I don't think his ipod was updated.

  • I have bought the Lightroom 5 disk last december but I mistakenly misplaced the case that had the serial number on it. I need that number to download it otherwise, the disk is no use. Is there any way I can get someone where else?

    I have bought the Light room 5 disk last December but I mistakenly misplaced the case that had the serial number on it. I need that number to download it otherwise, the disk is no use. Is there any way I can get someone where else?

    Please read this: Find your serial number quickly
    Also, please consider a safer method of retaining your serial numbers in the future (for all software, not just Lightroom)

  • Is there a way to tell what is actually being passed to DB from PreparedSta

    Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
    prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
    (there are x ?s)
    I precompile this, and later, when there is a connection I call set all the variables
    prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
    I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
    So I made a string that contains what ought to be the same query
    String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
    I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
    Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
    Thanks for any help you can give me.

    Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

  • Do I need to be worried?  Is there a way to tell if I have a bad MacBook?

    Hello all,
    I just picked up a used MacBook Pro from a friend for $650. It is within the dates that there was the issues with the video chipsets from NIVIDIA. This notebook was not used that extensively, I don't think, so I am not sure if I am in the clear regarding this issue or not. Is there a way to tell if this MacBook is covered under he known issue even though it is beyond all coverage. It notes that if the issue appears within the 1st 4 years of purchase, it will be covered. Is this the best that they can do? Or can an apple guy run something on the system, or look up my S/N# and tell me if I have a notebook with the issue?
    Reason I ask is to known whether I need to use this for the purpose I bought it for, or if I can rely on it as my main notebook as well.
    Thanks for all, or any, help that someone on here can be. Love this notebook (and only had it for a few hours), but just wondering how much it can be trusted, or if there is a way to know.
    Thanks you guys...hope I will be welcomed to the MAC club, as I have NEVER owned a MAC until now!
    Message was edited by: traitor

    Hi t,
    traitor wrote:
    Hello all,
    I am not sure if I am in the clear regarding this issue or not.
    You won't be sure until the day you stop using it or it develops issues.
    Is there a way to tell if this MacBook is covered under he known issue even though it is beyond all coverage. It notes that if the issue appears within the 1st 4 years of purchase, it will be covered.
    Correct. NVIDIA issue
    Is this the best that they can do?
    At this point, it is what it is. Anything beyond this would be at Apple's discretion, on a case-by-case basis.
    Or can an apple guy run something on the system, or look up my S/N# and tell me if I have a notebook with the issue?
    You've already noted that your MBP falls within the range. It does have the GPU that may develop the issue. If the issue is occurring now, their test will show it. If the issue is not currently occurring, the test will not show it. The test tests whether or not the issue is occurring, it's not a predictor as to if/when it will occur. Some GPUs within that range will not develop the issue.
    Reason I ask is to known whether I need to use this for the purpose I bought it for, or if I can rely on it as my main notebook as well.
    I would feel comfortable using it as my main computer (I have a MBP that also falls in that range), but this computer or any other in the world could develop issues at any time. I backup frequently and in different ways and strongly recommend that you do, and everyone else does too. Every HD will die at some point in ongoing use. Some will take seconds, some years. Some will give notice, some not. Some will leave platters with recoverable data, some will have the platters gouged by failed heads, with little to no recovery possible. The only safe computing is by backing up data (and although I've never had to resort to it, having a second machine available; I keep most of my "old" Macs, so if my "main" machine would ever go down, I can just grab my data from a backup and keep going).
    Thanks for all, or any, help that someone on here can be. Love this notebook (and only had it for a few hours), but just wondering how much it can be trusted, or if there is a way to know.
    Heat is a big enemy of electronics. Monitor periodically with iStat Pro. Fans should speed up long before CPU hits thermal shutdown range of 100C.
    Message was edited by: tjk

  • Is there some way to tell lightroom to just re-export the previously exported files?

    Shot a celebration (Park, Mass and Party), went home and processed the raw files in Lightroom, Exported them into 3 folders.
    Then I proceeded to edit the files in photoshop, first folder that consisted of the park went well. Files looks great, even after compressing them again.
    Then up were the Mass pictures and that's where it all went down hill. When I loaded up the first image it was compressed to hell All the black areas were all pixelated, so I went into lightroom and sure enough it changed the quality from 100% down to 60%!
    All my other settings were the same so I didn't accidentally reset the whole thing. Not sure why or how Lightroom did this, I've had it on 100% for the past 2 years!
    Now I have to export them all over again, the trouble is there was 800 that I culled down to just 150. I really don't want to hand pick them all over again.
    Is there some way to tell lightroom to just re-export the previously exported files?

    The short answer: no.
    Lightroom remembers recently imported files in a collection, but does not remember recently exported files.
    That said, you could use the SQLiteroom plugin (free, by me) to round up a collection of *all* exported files, which might help.
    Rob

  • Is there a way to see if someone used my computer when I was gone? Or tried to log in (unsuccessfully)

    is there a way to see if someone used my computer when I was gone? Or tried to log in (unsuccessfully)

    Launch your Console app (in Utilities folder) and look at all messages where you'll see everything your machine has done, complete with dates and time. Latest entries are at bottom of list.

  • Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

    Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
    I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
    I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
    As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

    Answer would be no unless application provided such feature. Numbers does not as far as I know.
    Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
    E.g., cell T20 is referenced not only in
    =T20+1
    but also in
    =SUM(T)
    =SUM(20:20)
    =SUM(S19:U22)
    =OFFSET(S1,19,1,1,1)
    =INDIRECT("T"&(10*2))
    In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
    Sorry to be the bearer of bad tidings.
    H

  • Is there a way to specify where an app starts on your screen

    Is there a way to specify where the JFrame will appear on your screen at runtime by default? For me it always starts on the upper left hand corner, and I want it more in the middle.

    Sorry, that should actually read:
        frame.setSize(800, 600);       
        // center the frame       
        Dimension size = frame.getSize();       
        Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();       
        frame.setLocation((screen.width - size.width) / 2, (screen.height - size.height) / 2);       
        frame.setVisible(true);cheers,
    Greg

  • Is there a way to tell what settings were used to export a PDF?

    Is there any way to tell what export settings were used to create a PDF? I'm trying to recreate settings used in a previous PDF.

    Most of which are controlled by the Export options used;
    Description
        KK Stevens
    PDF Preset: CC to PDF for KKSPC-Flattened
    Compatibility: Acrobat 4 (PDF 1.3)
    Standards Compliance: None
    General
        Pages: All
        Spreads: Off
        Generate Thumbnails: On
        Optimize PDF: Off
        Create Acrobat Layers: N/A
        Export Layers: Visible and Printable Layers
        Include Bookmarks: Off
        Include Hyperlinks: Off
        Export Nonprinting Objects: Off
        Export Visible Guides and Baseline Grids: Off
        Create Tagged PDF: Off
        Interactive Elements: Do Not Include
    Compression
        Color Images
            Bicubic Downsample at: 300 ppi
            for images above: 300 ppi
            Compression: ZIP
            Tile Size: N/A
            Quality: 8 Bit
        Grayscale Images
            Bicubic Downsample at: 300 ppi
            for images above: 300 ppi
            Compression: ZIP
            Tile Size: N/A
            Quality: 8 Bit
        Monochrome Images
            Downsample at: 1200 ppi
            for images above: 1200 ppi
            Compression: CCITT Group 4
        Compress Text and Line Art: On
        Crop Image Data to Frames: On
    Marks and Bleeds
        Crop Marks: Off
        Bleed Marks: Off
        Registration Marks: Off
        Color Bars: Off
        Page Information: Off
        Page Mark Type: Default
        Weight: 0.125 pt
        Offset: 0.125 in
        Use Document Bleed Settings: Off
        Bleed Top: 0.125 in
        Bleed Bottom: 0.125 in
        Bleed Left: 0.125 in
        Bleed Right: 0.125 in
        Include Slug Area: Off
    Output
        Color Conversion: No Color Conversion
        Destination: N/A
        Profile Inclusion Policy: Don't Include Profiles
        Simulate Overprint: Off
        Output Intent Profile Name: N/A
        Output Condition: N/A
        Output Condition Identifier: N/A
        Registry Name: N/A
    Advanced
        Subset Fonts Below: 1%
        Omit PDF: Off
        Omit EPS: Off
        Omit Bitmap Images: Off
        Transparency Flattener Preset: [High Resolution]
        Ignore Spread Overrides: Off
    Warnings

  • Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

    Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

    Hi! You can't do it without jailbraek. And I offer you "don't try it"!

  • I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

    I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

    Warp Stabilising is a two part process.
    Analysis and Stabilising.
    Both have a banner across the Program Monitor during the process ( unless you have turned that off.
    Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
    You may need to hit "Analyse" Button again.
    You should see the number of frames and the estimated duration during this process.

  • HT1689 If i have an iPhone that was stolen and is not hooked up through a carrier is there a way to locate where the phone is?

    If i have an iPhone that was stolen and is not hooked up through a carrier is there a way to locate where the phone is?

    No.

  • In the Lync Database, is there a way to tell if a call has been answered or gone to voicemail?

    We are using Lync 2010.
    In Lync, if a call is not answered, and does not go to voicemail, is anything recorded in the Lync database ?
    It looks to me as if nothing is recorded in the database, but I was wondering if there is an option in Lync configuration to make Lync record such activity in its database.
    Is there a way to tell from the LYnc database if a call was answered by a person or went to voicemail
    I have been looking at the LCSCDR database, at the sessionDetails table, but cannot see a way of distinguising between these scenarios.

    Nothing is recorded if the call is not answered and does not go to voicemail.  This is a source of frustration for me, and there is no way that I'm aware of to record this information to the LCSCdr database.
    To see if voicemail answered, you want to look at the client version that answered the call, voicemail will say ExchangeUM.  You can see me messing around with this in the below example, pulling from SessionDetails.User2ClientVerId and matching against
    the ClientVersions table.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HT1688 My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can del

    My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can delete it?

    Thanks - the only thing is for a long time it would not allow my to select Edit - I tried it but - what ever - this time it did - THANKS - Mark

Maybe you are looking for