Is there a way to tell which apps are using data while on WIFI?

Hello,
I have just purchased an iPad Air 2. I use my phone as a mobile WIFI hot spot to connect to the internet when I do not have a regular WIFI connection available. 151 MBs of data were consumed over an hour and a half or so. I played about an hour of Hearthstone, but I know from tethering my phone to my laptop that it usually doesn't use anywhere near that amount of data.
I would like to track down which applications might be using the data so that I can avoid using them while connected to my phone. Is there any way to do this?

Thanks for the quick response. That's a little disappointing though. Is there an app on the store?

Similar Messages

How can I tell which apps are using data

Perhaps this is a suggestion, just in case someone who is in a position to note this at Apple (not likely?) might read it.
How about an app included in the OS that allows users to track which apps are transmitting and receiving data through cellular data and/or wireless.
I keep getting charged by AT&T (it took restraint to not type a bunch of explatives before AT&T) for escessive data usage, even though I'm in wifi 90%+ of each day, and purposely restrict using it when not in wifi. Seriously, I don't now how I could use it less barring not using it at all, and I still get charged for data. I have no idea how to control this since I cannot tell which, if any, apps are transmitting data in the background, or if that's even possible.
Seriously annoyed at getting charged extra when the 'service' they provide barely works for me the miniscule amount of times I try to use it.

This is a user to user forum.
You can leave feedback here
www.apple.com/feedback/
You could also try searching for an app that tracks data usage

HT4972 is there a way to tell which computer an ipad syncs with?

I have tried to sync and update my ipad on my family's 3 different mac's, and i get a dialog box on each saying to sync with the computer you normally sync with. i am pretty sure it is one of these three mac's. Is there any way to tell which computer an ipad is syncing with? Or how to tell which apps are backed up and will remain after the update? thanks

No.

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Is there a way to determine which rows are inserted in JDT1 table by the system automatically?

Hi,
Is there a way to determine which rows are inserted in JDT1 table by the system automatically? Example, many GLs which are mapped in GL Account Determination, like Foreign Exchange Gain / Loss, Rounding Account, etc. are inserted by the system automatically in the Journal Entry on various scenarios, like during Incoming Payment, etc.
Which SQL query can give me those rows? Basically the WHERE condition should be based on which column or multiple columns in JDT1 table?
Thanks.

Hi Rajesh,
I'm not entirely sure but I think the TransId is the same in the header that belongs to the transaction.
OINV.TransId = JDT1.TransId
Best regards,
Pedro Magueija

Is there a way to download free apps. without using credit card info ?

Is there a way to download free apps. without using credit card?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Is there a way to download free apps. without using credit card?
Not with your current Apple ID. You have to create a new Apple ID using these instructions from Apple, exactly as written;
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
http://support.apple.com/kb/HT2534

Is there any way to access the App Store using OS10.4.11 on a Mac G4?

Hi All:
Is there any way to access the App Store using OS10.4.11 on a Mac G4 (dual 1.42 Ghz, FW800, MDD)?
Thanks,
Robert

No. None of the applications from it will work either.
(81546)

Is there a way to see what devices are using my iMessage account?

Is there a way to see what devices are using my iMessage account?

so if we do have the same apple id is it possible to delete if from any of the other devices or any where I can just unactivate them from my apple id account to where it would delete the message if they happened to get it?

AVM1 into AVM2. Is there a way to tell which is being loaded?

I have an app that users can load SWF files into. It's
written in AS3 (AVM2).
Currently, they can load both AVM1 and AVM2 SWF files into
it. Id like to give the users an alert when they load AVM1 content.
Is there a way to tell when AVM1 is being loaded...maybe a property
I should check in the loaded SWF?

I figured it out. Thanks.

Is there a way to tell which apple ID I have is better to back up to icloud?

I want to back my iphone 4s onto icloud, but I have 2 apple ID's. I don't know which one I should use; does it matter what I' ve purchased on either account? Is there a way to see which account I have used to purchase more? I don't want to lose contacts, pictures, songs, etc
thanks!

You are mixing icloud accounts with itunes accounts - they are different. You can use the same or different IDs for each account. I recommend that you use the ID that was used to buy the most items from the itunes store when setting up the store connection on the device. You'll lose access to the items bought using the other ID (only one ID at a time for the store is allowed).
As for icloud, you can only connect to one icloud account for all the features. Choose the one (the ID) that has the contacts, etc. that you want. Use that ID for the icloud connection (Settings>icloud).

Is there a way to tell what settings were used to export a PDF?

Is there any way to tell what export settings were used to create a PDF? I'm trying to recreate settings used in a previous PDF.

Most of which are controlled by the Export options used;
Description
    KK Stevens
PDF Preset: CC to PDF for KKSPC-Flattened
Compatibility: Acrobat 4 (PDF 1.3)
Standards Compliance: None
General
    Pages: All
    Spreads: Off
    Generate Thumbnails: On
    Optimize PDF: Off
    Create Acrobat Layers: N/A
    Export Layers: Visible and Printable Layers
    Include Bookmarks: Off
    Include Hyperlinks: Off
    Export Nonprinting Objects: Off
    Export Visible Guides and Baseline Grids: Off
    Create Tagged PDF: Off
    Interactive Elements: Do Not Include
Compression
    Color Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Grayscale Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Monochrome Images
        Downsample at: 1200 ppi
        for images above: 1200 ppi
        Compression: CCITT Group 4
    Compress Text and Line Art: On
    Crop Image Data to Frames: On
Marks and Bleeds
    Crop Marks: Off
    Bleed Marks: Off
    Registration Marks: Off
    Color Bars: Off
    Page Information: Off
    Page Mark Type: Default
    Weight: 0.125 pt
    Offset: 0.125 in
    Use Document Bleed Settings: Off
    Bleed Top: 0.125 in
    Bleed Bottom: 0.125 in
    Bleed Left: 0.125 in
    Bleed Right: 0.125 in
    Include Slug Area: Off
Output
    Color Conversion: No Color Conversion
    Destination: N/A
    Profile Inclusion Policy: Don't Include Profiles
    Simulate Overprint: Off
    Output Intent Profile Name: N/A
    Output Condition: N/A
    Output Condition Identifier: N/A
    Registry Name: N/A
Advanced
    Subset Fonts Below: 1%
    Omit PDF: Off
    Omit EPS: Off
    Omit Bitmap Images: Off
    Transparency Flattener Preset: [High Resolution]
    Ignore Spread Overrides: Off
Warnings

Is there a way to see which images are linked to .indd files?

After working for this company for the past year and a half I'm accumulating tons of image files. I want to eliminate any superflous images and before I start cleaning house I want to see if there's a way of telling whether or not they're linked to an .indd document. For obvious reasons I don't want to delete a file if it's in use somewhere.
I checked in Bridge, which I rarely use, and I see that you can tell which files are linked from an .indd document, but how about the other way around? If I highlight a .jpeg is there a way to trace if it's linked?
I have a feeling the answer is no, but I appreciate any help. Thanks.

Before I start a new topic, I was wondering if anyone knows if there's a way to save URL's within Indesign. I'm tired of typing out http://ect.ect.ect. or going to the site and copying and pasting the URL over and over. In my documents I don't want to include all the extra slashes and periods so if there's a way to bring up those previously used URL's that would be great.
So, for example in my document it'd say something like, "visit us on the web at adobe.com" but it would link to http://forums.adobe.com/community/indesign/indesign_general
So, instead of having to go back to the website, copy, paste I could load up my list of URL's from another document.
I probably just answered my own question. Feature request, perhaps? Or hopefully I'm missing something.

How can I determine which apps are using excessive data on a Samsung Galaxy?

We have been going over our data plan for the last couple of months.

settings > data usage, then you can scroll through the list of apps that are using data
Also ensure that apps are set to either not update automatically or to update only over wi-fi (through your Google Play app settings).

Is there a way to tell if you are in Web Start or Standalone mode

Hello,
I am working on a program that can be ran either in Web Start or Standalone mode. Is there a way I can tell inside the code which mode I am in?
The reason why I ask is because if I am in Web Start mode I store files using the PersistenceService api... but of course this will not work in Standalone mode. So in Standalone mode I want to just store in working directory.
thanks
jose

Check for presence of security manager.
In webstart mode your code will run in the sandbox (even if it is singed security manager will be installed).
Or you can simply use class for name to lookup for PersistanceService. It is not on the default classpath for standalone application.

Is there a way to select which display to use??

Hi,
I think my problem is OS dependent but i'm still gonna ask...
Code related to this problem is:
Process runner;
Runtime t = Runtime.getRuntime();
runner = t.exec("<path-to-office>\powerpnt.exe /s '<path-to-show>\show.ppt'");
// The program in line above is not nessecary powerpoint it can be also Acrobat or web browser!!
// (basicly anythig which can be run on full-screen mode from command line)
The Problemo:
I have a computer (running on Win XP) which has two (or more) displays attached (Matrox G550),
do i have a chance to detect amount of displays and if there is more than one display, can i somehow
select in Runtime which display to use to show results of code above?
Matrox solution was "when you run program once in certain display , it should be opened in same
display next time", well... what if i shoud use 2 powerpoints in same time to have x kind of ppt in one
screen and y kind in second screen wich has totally different kind of info what screen x does?
If it's possible with JFrame to decide wich screen to use, i'm almost shure that i can change program to
use pictures instead of external programs.
-jori

Hmm, I don't know how you would do this with out going native, but for Java frames you can use the following links.
http://java.sun.com/j2se/1.4.2/docs/api/java/awt/GraphicsDevice.html
http://openide.netbeans.org/multi-monitors.html

Is there a way to tell which apps are using data while on WIFI?

Similar Messages

Maybe you are looking for