Is there a way to test a remote ftp destination?

Before submitting a task with a remote ftp destination I would like to test if the ftp login I've entered is working. Is there a way to do this in Compressor?
Will Compressor put the file somewhere locally as well if uploading for some reason fails?

A peek in the docs would help- there is a TON of information there.
You might also try the Reachability sample app for ideas:
http://developer.apple.com/iphone/library/samplecode/Reachability/index.html

Similar Messages

  • Is there a way to test a PRAM/NVRAM battery

    I have a newer iMac that was not restarting after power failures automatically. I performed a PMU reset (or equivalent, ie unplug power cord for 15 seconds) which did not resolve the problem. I ended up zapping the PRAM and now my issue seems to be resolved. I've read that the parameter memory and nonvolatile memory can become corrupted which I assume my problem was. My office does have intermittent power outages that could have caused my problem, so we now have UPS battery backups on essential computers. My concern is that I may have ended up with a bad battery in my iMac and that is what could have caused the PRAM issue which in turn may have caused the restart after power failure option to fail. Granted my problem could just be a one time issue that will not happen again. Which brings me to my actual real question for the macintosh gurus who frequent this discussion:
    Is there a way to test the PRAM battery without removing it from the machine?
    I'm curious if the hardware test can determine if the battery is charging or working correctly or if there is a way to get some type of report using the terminal.

    If you unplug the computer from AC for one minute, then plug it in and start it up (do not connect any network cable and be sure Airport was turned off before shutdown.) If the Date and Time are correct then the PRAM battery is OK.

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Is there a way to test airport extreme for optimal function

    Is there a way to test airport extreme for optimal function?

    In your Mavericks OS X.
    Go to the WiFi icon on the top right.
    Hold the option key and click.
    At the bottom of the list you will see "Open Wireless Diagnostics"
    Open this and you can diagnose your wireless network.
    While it'sopen hit the Command + 2 and it will open the Utilities window.
    This will give you and overview of interference and what channel is best.
    You can alos run a speedtes over WiFi then run a speedtest directly connected with ethernet.

  • HT1595 cannot connect ATV to actiontec router with wired ethernet.  router does not see ATV.  is there a way to test the  ATV ethernet port on the back?

    have an 3g ATV (5.0 4099) wired via coax cable to actiontec MI 424-wr router.  Router cannot see ATV.  Is there a way to test ethernet connector on back of ATV?  ATV does work when setup for wireless but its much too slow for actual use when configured that way.

    Steve,
    I think the isssue is clearly that your router is not acting as a DNS Server.  You will need to contact Verizon to see how to configure it so that it does supply the DNS addresses.  If you can configure it in your Router try using 8.8.8.8 and 8.8.4.4 as the DNS Server addresses.  These point it to Google's Public Domain DNS Servers.  There are others (opendns.org).  But for now these will hopefully get you up and running.

  • Is there a way to test for network connectivity (and a way to simulate it)

    Is there a way to test for network connectivity, which API to look into? Also, is there a way to test that code in the simulator, that is, to turn off the network in the simulator.
    Thanks

    A peek in the docs would help- there is a TON of information there.
    You might also try the Reachability sample app for ideas:
    http://developer.apple.com/iphone/library/samplecode/Reachability/index.html

  • ICloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

    iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

    iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

  • Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub?  The drives will occasionally display in Apple profile.  Any help would be deeply appreciated

    Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub?  The drives will occasionally display in Apple profile.  Any help would be deeply appreciated

    It's not just you, I can't authorise my phone. It seemed to go down just after I started the update (it wasn't my fault though). I am using chrome, and it does not seem to be a firewall issue, or the bannerblock issue that I read about else where, since I dont have that program installed. Strange though how the support forum is still running. If I go to http://www.apple.com/support I get nothing, but googling topics allows me to see em.

  • Is there a way to test the Firewire 800 port?

    My firewire 800 port seems to no longer work on my Imac. Before bringing the machine to repair, I was wondering if there is any way to test the port, or to reset it. I remember I had a similar issue a few years ago and I could make it work again.
    Thank you for your help!

    Hi Felix
    1. Try resetting the FireWire bus as described in the +What to do if your computer won't recognize a FireWire or USB device+ article below:
    http://support.apple.com/kb/HT1317?viewlocale=en_US
    2. Connect a FireWire device and open your *System Profiler,* then in the Hardware section select FireWire to see if the device is shown on the bus.
    Dennis

  • Is there a way to monitor a remote location using a video device?

    I was wondering if there was a way to monitor our vacation home while we are away? Do I need a computer at the remote location and does it have to be on all of the time? All I have there is a dial up connection. Here I have a cable connection. Is there any way to do this inexpensively?
    Richard

    There are some special microphones made for iPhone use that provide headphone output, such as the iRig
    <http://www.ikmultimedia.com/irigmic/features/>

  • Is there a way to test trial HANA?

    Hi!
    I am a BI newbie and was wondering if there is any way to test HANA...? Maybe a trial version or something? :S
    or is the solution available to use for any sap partner?
    I have been looking for something like the 30 day trial version of dashboards and crystal that you can download [here|http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx]. But I guess that is just too much to ask XD
    any help is welcome
    Alejandra Meraz
    Edited by: alejandrameraz on Jul 21, 2011 9:19 PM

    Alejandra, if you are an SAP partner, than the easiest way is to contact your SAP partner manager and ask for availability of partner test&training licenses. You still might need to order pre-configured appliance from h/w vendor. Regards. -Vitaliy
    PS. Think as well if you can come to TechEd this year - there are plenty of sessions, including hands-on, planned.

  • Is there a way to test a modem?

    I have an iMac g4 (with the swivel screen). I have been unable to connect to the internet server lately. The modem dials and starts handshaking and then hangs up before ever reaching the password authentication stage.
    Is there a way to verify the modem's capability to connect?
    Thanks
    Jeff

    You may do better to ask in the iMac g4 forum
    Do you have a hardware test CD? might be an idea to try that aswell.
    --Spire

  • Is there a way to Report out Remote Desktop Gateway Manager Monitor data?

    We are running Windows Server 2012 R2 Remote Desktop Services configured to provide a managed pool of VMs through a RD Gateway server. Everything is working well. We would like to generate a regular report on the information that shows up in the Gateway
    Monitoring window about connections and users etc. Is there any way to generate such a report without purchasing 3rd party software?

    Hi,
    Based on my experience, you can use Remote Desktop Gateway Manager to view information about active connections from Remote Desktop Services clients to internal network resources through an RD Gateway server. However, there is no such options in
    RD gateway manager to create reports for that.
    It seems that System Center Operations Manager can monitor Remote Desktop Gateway Service and the number of sessions that run through the RD Gateway are monitored.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Is there any way to get a remote working with my powerbook?

    Hey guys,
    I'm jealous of my friends with MacBook Pros ;D, and would really like to control the volume and tracks of iTunes with a remote. Is there any way to add one?
    Thanks!
    Alec

    Check out this thread, with caution.
    Joe

  • Is there a way around the build-in FTP as read-only access

    "With read-only access, you can copy files from the server, but to copy files to the server you may need another FTP app. Choose Apple menu > App Store to find FTP apps available for OS X."
    Is there a way to get around this? Can i get the build-in FTP to allow for uploading files as well? Terminal “hack” or something?

    >> Can i get the build-in FTP to allow for uploading files as well? Terminal “hack” or something?
    Not with a Terminal hack, no; and it's nothing to do with being a guest user.
    Consider EtreNet which costs $10, but appears to do what you want.

Maybe you are looking for

  • Adress Book Groups in IOS 6

    Why Apple developper's remove the old way of selecting and finding  a contact inside groups !! it is a nightmare now , i have more than 1200 contacts and how can i find someone inside the new way of working ? how it's possible someone at Apple decide

  • WM : How to move Stock available in Interim bin to normal bin

    Hi... I am doing MB1C using MType 561 to create some inventory of a material. The stock gets incresed in plant / storage location at INV level but in WM it is lying at interim location of linked warehouse / storage type. I did try to find out the TR

  • Creating Oracle Model of SQL Server 2000 Model

    Hi, I have encountered couple of T-SQL where such case statements are resides stated below. I have found out that when I erased the distinct, it was parsed correctly by the OMWB. What may be the cause of this. Any comments? CASE [MONTH](dbo.recetat.d

  • Customizing Applications with MDS

    I have been investigating static customization using MDS and have read through [Customizing Applications with MDS|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/customize.htm] (and the seemingly identical copy in JDeveloper's Help Cente

  • Copying to iPod when ipod is offscreen

    I have a lot of playlists which means that when I want to transfer one to my iPod, the iPod has disappeared off the top of the window. Is there an easy way to move a playlist from, say, the bottom of the playlist 'list' to the iPod so it gets copied