Is there a way to turn on verbose output for proc?

I'm using 7.3.4 -- I know, it is no longer supported and we are in the process of upgrading to 9i. But until we do, we are having problems compiling a library that was just successfully compiled yesterday afternoon. Nothing has changed in the 7.3.4 installation. Nothing has changed in the libraries source code. Nothing has changed in the makefile. Nothing has changed in my env.
But now I cannot compile this library. I get:
PCC-F-NOERRFILE, unable to open error message file, facility PR2
And sure enough, $(ORACLE_HOME)/precomp/admin/pcscfg.cfg exists but it is zero length.
So I tried copying the 8.1.7 version of this file, and I get the same PCC-F-NOERRFILE message.
So is there a way to turn on verbose when you are compiling the .pc files?

No, not in Number for iOS.

Similar Messages

Is there a way to turn on auto complete for text that has to be entered repeatedly? I don't want to use a pop up list.

Is there a way to turn on auto complete for text that is repeated? I don't want to use a pop up list.

No, not in Number for iOS.

Is there any way to turn off the ability for my kids to make purchases on their ipods

Is there any way to turn off the purchase ability on an ipod?

Yes. You can set restrictions.
iPod touch User Guide (For iOS 6.1 Software)

Is there a way to turn a sound on for low battery on the iPhone?

Does anyone know if there is anyway to turn a sound on when your iPhone gets to 20% battery life in addition to the visual indicator? iPhone is the only phone I know of that does not make some sort of sound, and my phone keeps quietly dying in its holster, and I only realize it several hours later with people upset at me that I have missed their calls when it would have been too easy for me to plug it in. This seems like a pretty simple option for them to include for folks to tun on/off as they prefer. If not, how can I recommend this to apple for a future update? Thank you in advance for the help.

I'm not aware of any way to do this. You might want to invest in a battery case if this is a problem for you; our users here all have them.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback; I agree it's a good idea.

Is there any way to turn off Auto-Hyphenation for pages in iPad?

As above, Is there any possible way to turn it off for pages on iPad??
Much appreciated
Lee

Yes. You can set restrictions.
iPod touch User Guide (For iOS 6.1 Software)

Is there a way to turn on/off 3G for iPhone 4S with a voice command and/or without Siri?

For example, I almost always have 3G turned off on my iPhone 4S so that I won't use any of my cellular data when not needed. However, when I'm driving, and I need to use Maps for directions, it would be nice to unlock the iPhone by voicing my PIN and using a voice command to turn on 3G and accessing Maps.
Is there already a way to do this? I know that accessing applications via Siri will be capable when iOS 6 is released.
Voice Control should also be set to the default voice-command option when Siri is either off or when the iPhone does not currently have access to the internet. Because Siri requires the internet, Voice Control could be used to unlock the iPhone and turn on 3G. Once 3G is turned on, Siri can take over (if Siri is turned on in Settings) to access an application, like Maps. When finished, there should be a voice command that will "turn off 3G."
So, here's how the whole process could work:
1) hold Home button to access Voice Control and respond with PIN to unlock the iPhone - "one, two, three, four" or "twelve, thirty-four" for PIN 1234 (I'm not sure if people would want to say, "one thousand, two-hundred, thirty-four")
2) once unlocked, it should intuitively stay on Voice Control so the user can say "turn on 3G"
3) if Siri is enabled, it will take over Voice Control; if Siri is disabled, Voice Control will remain active, bu you should also have the voice-command option to "turn on Siri" (now that 3G is on)
4) a voice command to "launch Maps" - I know that this will capable with iOS 6
5) when done, hold Home button and voice a command to "turn off 3G" via Siri
Could this feature please be integrated into iOS 6?
In terms of driving and accessing Maps, this would be a lot safer and a lot easier.
Thanks!

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Is there a way to turn a license purchased for CF10 into a license that will work for a CF9 server?

Yes, Adobe does provide for a backward license policy which will allow you to purchase ColdFusion 10 and have customer service generate a license key for the CF 9 version that you need. It is a fairly straightforward process. Here is an FAQ DOC and link to the policy information DOC

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Is there a way to turn off calendar notifications for ical and outlook when the program is not active?

Hi - i'm finding these to be a little bit annoying, anyone know how to do this? The Outlook ones bug me more than the iCal ones. Also, i'm wondering if that is hurting battery life to have that running the background.

I'd install Better Touch Tool (free). Add two gestures for Finder ONLY that have "No action" associated with them. This disbales pinch/zoom on the desktop AND in any Finder window, but not in any other application.
If you'd like to occasionally use pinch to zoom in the Finder (to zoom into a photo thumbnail for example), then add two more gestures, again for Finder ONLY - but this time also selecting one of the modifier keys (e.g. "Option" key). For these gestures set as "Use Apple Default or do nothing".
Together, this enables disabling of the zoom feature (to prevent accidental zooming of the desktop icons for example). But whenever you'd like to zoom into a document or photo etc in a Finder Window (which are also now disabled), you can now simply hold down "Option" key and the Pinch functions work again.
This solution works for me on 10.6.8

Is there a way to turn on time stamps for all text messages?

I want to time stamp all my messages not just select ones...is this possible

Just swipe the text bubbles to the left to see time stamps for all messages you sent.

In iOS 7 is there a way to turn off that new camera burst mode?

I like the old camera ability to keep your finger on the shutter and release to take a photo. It helps avoid camera blur with certain close shots you are trying to frame, and was one of my favorite "hints on using your camera" for the iPhone.
But with iOS 7 this has turned into burst mode, which is driving me crazy.
Is there a way of turning off burst mode for the shutter button and having it work like it did before?
Thanks,
doug

Thanks, Doug. I'm a little disappointed to discover so few of us who miss what I consider one of the iPhone camera's cleverest refinements. Being able to hold one's finger on the shutter and release to take the photo is something I did by habit, and now sorely miss.
Most troubling to me is that the change represents a shift to favoring an entirely new way of taking photographs — a style I'd conservatively call, "by the seat of your pants". That's never the way I've taken photographs.
Like Nadnerb19, I'm hoping Apple reconsiders its priorities, and gives us the option to make a choice between machine gun style photography and the steadier, more 'focused' approach afforded by previous versions of iOS.

Is there a way to turn off using ram as intermediary when transfering files between 2 internal hdds? (write cache is off on all drives)

right forum? first time here. none of the options seem perfect. so i guess this applies to 'setup.' i tried to describe what's happening verbosely from the start of a file transfer to completion of writing file to 2nd hard drive.
win 7 64bit home - i2600k 3.4ghz - 8gb of ram - 2hdd 1 ssd
I have this problem when transferring files between 2 internal hard drives. one is unhealthy (slow write speeds but not looking for advice to replace it because it serves its unimportant purpose). so, the unhealthy drive drops into PIO mode - that's acceptable.
however, a little over 1gb of any file transfer is cached in RAM during the file transfer. after the file transfer window closes, indicating the transfer is "complete" (HA!), it still has 1gb to write from RAM which takes about 30minutes. This would
not be a problem if it did not also earmark an additional 5gb of ram (never in use), leaving 1gb or less 'free' for programs. this needlessly causes my pc to be sluggish - moreso than a typical file transfer file between 2 healthy drives. i have windows write
caching turned off on all drives. so this is a different setting i can't figure out nor find after 2 hours of google searches.
info from taskmanager and resource monitor.
idle estimates: total 8175, cached 532, available 7218, free 6771 and the graph in taskman shows about 1gb memory in use.
at the start of a file transfer: 8175, 2661, 6070, 4511free and ~2gb of ram used in graph. No problems, yet.
however, as the transfer goes on, the free ram value drops to less than 1gb (1gb normal +1gb temporary transfer cache +5gb of unused earmarked space = ~7gb), cached value increases, but the amount of used ram remains relatively unchanged (2gb
during transfer and slowly drops to idle values as remaining bits are written to the 2nd hard drive). the free value is even slower to return to idle norms after the transfer completes writing data to 2nd hard drive from RAM. so, it's earmarking an addition
5gb of ram that are completely unused during this process. *****This is my problem*****
Is there any way to turn this function off or limit its maximum size. in addition to sluggishness, it poses risk to data integrity from system errors/power loss, and it's difficult to discern the actual time of transfer completion, which makes it difficult
to know when it's safe to shutdown my pc (any data left in ram is lost, and the file transfer is ruined - as of now i have to use resmon and look through what's writing to disk2 -> sometimes easy to forget about it when the transfer window closed 20-30minutes
ago and the file is still in the process of writing to the 2nd disk).
Any solution would be nice, and a little extra info like whether it can be applied to only 1 hard drive would be excellent.

Thanks for the reply.
(Although i have an undergrad degeee in computers, it's been 15years and my vocab is terrible. so, i will try my best. keep an open mind. it's not my occupation, so i rarely have to communicate ideas regarding PCs)
It operates the same way regardless of the write-cache option being enabled. It's not using the 5gb for read/write buffer - it's merely bloating standby memory during the transfer process at a rate similar to the write speed of destination (for my situation).
at this point i don't expect a solution. i've tried to look through lists of known memory leaks but i dont have the vocabulary to be 100% certain this problem is not documented. as of now it can't affect many people - NAS's with low bandwidth networks, usb
attached storage etc. do bugs get forwarded from these forums? below i can outline the consistent and repeatable nature not only on my pc but on others' pcs as well (2012 forum post i found).
I've been testing and paying a little more attention and i can describe it better:
Just the Facts
Resmon Memory Info: "In Use" stays consistent ~1gb (idle amount and roughly the same when nothing else is running during file transfer)
"Modified" contains file transfer
data (meta data?) which remains consistent at little over 1gb (minor fluctuations due to working as a buffer). After the file transfer window closes "Modified" slowly diminishes as it finishes lazy writing (i believe that's the term). I forget idle
pc amount, but after transfer this is ony 58mb)
"Standby" as the transfer starts it immediately rises to ~2gb. I'm sure this initial jump is normal. However, it will bloat well over 5gb over time with a large enough transfer increasing at a consistent rate during the entire transfer
process. the crux of the matter.
"Free" will drop as far as 35-50megabytes over time.
as the transfer starts, the "Standby" increases by an immediate chunk then at a slow rate throughout entire transfer process(~1mb/s). once writing metadata to RAM no longer occurs, the "Modified" ram slowly (@500kb/s matching resmon disk
activity for that file write) diminishes as it finishes lazy writing, After file is 100% written to destination drive, "Standby" remains a bloated figure long after.
a 1.4gb transfer filled 3677MB of "Standby" by the time writing finished and modified ram cleared. after 20minutes, it's still bloated at 3696MB. after 30-40mins it's down to 2300mb - this is about what it jumps immediately to when transfer starts
- it now remains at this level until i reboot.
I notice the "standby" is available to programs. but they do not operate well. e.g. a 480p trailer on IMDB.com will stop-and-go every 2-3seconds (stream buffers fine/fast) - this would be during the worst case scenario of 35-50mb "Free"
ram. my pc isn't and never was the latest and greatest, but choppy video never happens even with 1 or 2 resource hogs running (video processing/encoding, games, etc).
Conjecture Below
i think it's a problem when one device is significantly slower at writing than the source device - this is the factor that i share with others having this problem. when data is written to modified ram then sent to destination, standby memory is expanded
until it completely or nearly fills all available RAM - If the transfer size is large enough relative to how slow the write speed of destination device is. otherwise it fills it up as much as the file size/write speed issue allows. the term "memory leak"
is used below but may not technically be one, but it's an apt description in layman's terms.
i saw a similar post in these forums (link at end). My problem is repeatable and consistent with others' reports. I wasn't sure if i should revive it with a reply. some of these online message boards (maybe not this one) are extremely picky
and sensitive, lol.the world will end if an old thread revives - even if for a good reason.
i can answer some of the ancillary issues. one person (Friday, September 21, 2012 8:33 PM) mentions not being able to shutdown, i asume he means stuck on the shutdown screen - this is because lazy writing has not completed - his nas write speed is significantly
slower than reading from source - the last bits of data left in ram still needs to be writen to the destination. shutdown will stall for as long as needed until the data finishes writing to destination to prevent data loss.
another person (Monday, September 24, 2012 6:31 PM) mentions the rate of the leak, but the rate is more likely a function of read speed from source relative to write speed of destination. which explains why my standby expands closer to a 1:1 ratio compared
to his 1:100 (he said 10mb per 1000mb)
we all have the same exact results/behaviour, but slightly different rates of bloating/leaking. as the file is written from from the ram to the destination, standby increases during this time - not a problem if read and write speeds are roughly equal (unless
your transfering a terabytes then i bet the problem could rear its head). when writing lags, it gives the opportunity for standby ram to bloat with no maximum except the amount of installed ram. slower the write speed, the worse the problem.
The reply on Wednesday, September 26, 2012 3:04 AM has before and after pictures of exactly what i described in
"Just the Facts". Specifically the resmon image showing the Memory Tab.
The kb2647452 hotfix seems to do some weird things relative to this problem. in the posts that mention they've applied it: after file completes it looks like the "standby" bloat is now "in use" bloat. as per info from Tuesday, October
09, 2012 10:36 PM - bobmtl in an earlier post applies the patch. compare images from earlier posts to his post on this date. seems like a worse problem. Also, his process list indicates it's very unlikely they add up to ~4gb as listed in the color coded bar.
wheres the extra gb's coming from? likely the same culprit of what filled up "standby" memory for me and others. it looks like this patch relative to this problem merely recategorizes the bloat - just changes the title it falls under.
Link:
https://social.technet.microsoft.com/Forums/windows/en-US/955b600f-976d-4c09-86dc-2ff19e726baf/memory-leak-in-windows-7-64bit-when-writing-to-a-network-shared-disk?forum=w7itpronetworking

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Is there a way to turn off all push notifications off at once on iOS7

Is there a way to turn off all push notifications off at once on iOS7 (iPhone5s). Used to be able to on iOS6. Handy features for soccer fans and such who PVR games but have lots of apps that push the score

N
O.

When sharing screen from work with my home computer, is there any way to turn off the display at home?

Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
Thanks in advance!
Matt

I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
Matt

Is there any way to turn off the auto formatting in Pages? I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way". I HATE this!

Is there any way to turn off the auto formatting in Pages? I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to. But NO! Pages keeps changing the font size! I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size! I am getting SO FRUSTRATED! I've spent over an hour trying to get the stupid program to let me just type my letter! Can anyone help?

The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
You're welcome Rich. Glad to help.
Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
Mahalo for the and Aloha from Big Island.

Is there a way to turn on verbose output for proc?

Similar Messages

Maybe you are looking for