Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Similar Messages

  • Is there a way to turn your voice mail off

    On the i phone 5 c is it possible to turn voice mail off ? I do not want voice mail.

        strawnw88,
    Thanks for your question! I have some good news for you.  Voicemail on the iPhone 5c is optional.  You can choose not to set it up if you don't have a use for it.  If you've already set it up on your end, then we may need to disable from the network side. 
    Let us know if you need further assistance with this!
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Is there a way to turn 'find my iphone' off other than using my phone? The screen is not working, and I'd like to reset it, but cannot because that feature is on!

    The screen on my son's 5c is not working - all black.  I am trying to reset the phone but cannot because 'find my iphone' is turned on.  I cannot use the screen to turn it off.
    I also cannot backup the phone because I cannot enter the passcode on the screen!  Any ideas on how to get around the passcode AND turn off the 'find my iphone' feature?

        I would love to help you with this, CoachKat. Given the situation, you will need to connect your phone to iTunes via a PC. This will allow you to reset the device. Let me know if you need additional assistance.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • HT201401 The volume buttons on the side of my iPhone 4S do not work . Is there a way to turn them on or off or are they broken

    Volume button don't work . Can they be turned on and off?

    If the iPhone falsely senses it is docked due to short in the charging port it can disable Volume buttons. Shorting in charging port can be due to dust, debris, etc. If no Warranty, clean with toothbrush and small amount of Isopropyl Alcohol. Never hurts to try a Restore with current iTunes on your computer, too.

  • My plus and minus volume control doesn't work.. Is there any way of turning them on or off? Or is my phone faulty?

    My plus and minus volume control doesn't seem to work.
    Can I switch the volume on?

    Hi Timjazzhair,
    Go to Settings ==> Sounds and in 'Ringer and Alert' set 'Change with Buttons' to YES.
    Woops! Meg beat me to it!

  • Is there any way to turn off the auto formatting in Pages?  I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way".  I HATE this!

    Is there any way to turn off the auto formatting in Pages?  I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to.  But NO!  Pages keeps changing the font size!  I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size!  I am getting SO FRUSTRATED!  I've spent over an hour trying to get the stupid program to let me just type my letter!  Can anyone help?

    The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
    You're welcome Rich. Glad to help.
    Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
    Mahalo for the and Aloha from Big Island.

  • Is there a way to turn off the function in Lion that re-opens the last project you worked on in a given program?

    Is there a way to turn off the function in Lion that re-opens the last project you worked on in a given program?

    Dealing With The Resume Feature of Lion
    Managing Mac OS X Lion's application resume feature.
    If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
    It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
    If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
    chflags nohidden ~/Library
    Press RETURN. Quit the Terminal application.
    In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
    Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
    The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

  • I noticed that touch id can be bypassed by swiping and entering passcode.  Is there any way to turn off the passcode, so the phone can ONLY be unlocked using your fingerprint?

    I noticed that touch id can be bypassed by swiping the screen and entering your passcode.  Is there any way to turn off the passcode, so the phone can ONLY be unlocked via fingerprint?  I liked the idea of having the extra security of a fingerprint sensor, but not if the phone can still be unlocked using only the passcode.  Then, what's the point of touch id?  Am I missing something here?

    What happens if the touch ID sensor gets broken?  It is a backup method to get in to your device.
    Consider editing your lock screen passcode, changing it from a simple 4 digit code, to a longer more complex password.
    HTH

  • Is there any way to turn off the ical feature whereby someone emails you a meeting date/time and it automatically goes on your iCal?

    Is there any way to turn off the iCal feature whereby when someone emails you a meeting date/time and it automatically appears on your calendar?  Once there they can't even be edited or deleted.

    Greetings,
    What version of the Mac OS are you running (Apple > About this Mac)?
    You should be able to delete events in iCal as long as they are not from a "Subscription" calendar.  Subscriptions show up on the left hand side of iCal under the "Subscription" category if you have any.
    You can tell iCal to not check your mail program for invites by going and unchecking the box found in iCal > Preferences > Advanced > "Automatically retrieve..."
    Hope that helps!

  • HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any

    HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks

    The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
    To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
    Regards
    Rajshree

  • My iPod touch 8GB screen has been cracked. It is still under the Wal-Mart 2 year extended warranty, but I really want 5th generation! Any way to get it replaced then return it for money back or even get a discount on it??

    My iPod touch 8GB screen has been cracked. It is still under the Wal-Mart 2 year extended warranty, but I really want 5th generation! Any way to get it replaced then return it for money back or even get a discount on it??

    Apple will only give you a 10% discount if you turn that one in and purchase the new one.
    I do not know if the WalMart warranty covers accidental damage like a broken screen.

  • LWAP AP1131 Is there any way to turn off the Round BLUE LED

    The 1131 Access point in IOS mode had an option to turn off the BLUE LED circle on the access point. The access point has been converted to LWAP and connected to controller and now the BLUE LED circle is back.... is there any way to turn it off ??
    Can not see an option on the controller.
    Very bright in a dark room (ie hospital beds...)
    Charles

    Hi tdennehy
    Well, first of all thanks a lot for your replay. We have perfect LOS with certainly more than 60% of the Fresnel zone being clear. The Yagi antennas are pointed at each other with no doubt, we actually got while in the "install root" and "install non-root" bridge mode the I and R LEDs on and stable, and S blinking. At times we got all the LEDs blinked fast but I guess we were passing through some strong signal concentrations. Heh, the client sugested to install the Yagi antennas as the omni but I just ingnored him, what else could I say hehe.
    When we were installing all the equipment I had a play with different channels and it seemd like CH 1 worked best. The antennas use the cable they come with because the BR-1310 bridges we have installed right beneath the antennas, only the coaxials cables go down to the office to the power injectors.
    Please see the attached screenshot from the signal and SNR reading. It seems like we have a little bit of noise. The signal was -61dB to -63dB on the installation day but 2 weeks later it went down to about -65dB.
    So, you suggest we rotate both Yagi antennas by 90 degrees correct? I guess one needs to be turned clockwise and another anticlockwise correct? What de we actually gain by doing that? We change the polarization from vertical to horizontal? Could you please explain it to me a little bit more?
    Thanks in advance for sharing your experience. I am going to troubleshoot this on Monday so I would be great if you could give me some sugesstions. I thought of changing the Yagi antennas to 19dB direccional flat pannel of 3rd party but with this distance 13,5dB yagi I think are sufficient. Does the "distance" settings on root bridge have impact on the signal sterngth?
    One more question, at the moment the 2 connected offices are in the same subnet so to speak in the same broadcast domain. On one site (non-root bridge)  they have up to 150 client connections to the servers on the other site (root bridge) but with 20kbps per station making it roughly 3Mbps total bandwidth needed. When they connect all at the same time, our client say the wireless link go. I really don't believe that becasue on the wireless readings we get betwenn 18 and 24Mbps so it should be way more than enough. Do you think by putting both sites in different VLANs would help a little bit so the local traffic would not need to be broadcasted over the wireless link back and forward? Can you shed on that a little bit of your experience? I suspect they have something to do with the switching on local site because when I was pinging the non-root bridge from the local site but connected to a different switch then is connected the Cisco bridge, I got funny reposnses, between 5 and 40ms over ethernet with 10 connections to the remote site over the wireless link but when we pingged the same CIsco bridge from the local site but connecte to the same switch as the Cisco bridge the responses were 1ms. It makes me think that they have some broadcast storming on the local site and that also propagates the wireless link...

  • Is there any way to turn off data and use only wi fi

    is there any way to turn off data and use only wi fi, going to a foreign country and do not want to use data but wi fi will be available. I want to be sure to use only wi fi

    Yes there is!
    Simply go into Settings, General, Mobile Data, Turn this off and make sure Data Roaming is also switched off! You can have wifi on and this will no charge your account for the data you use via Wi-Fi!

  • Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. Is there any way to turn this off ?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. This is very very very annoying & I see no options in the settings to turn this off. Is there any way to turn this off ? Even if I just press the X button to close Firefox then later in the day I open Firefox the previous pages always open & it is annoying. I apologize for the language but that is just how ''irritated'' & annoyed I am about this
    <blockquote>language cleaned up by a moderator - eh</blockquote>
    == This happened
    ==
    Every time Firefox opened
    == It started randomly
    ==
    == Troubleshooting information
    ==
    There was nothing in the Troubleshooting about this
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Default Plug-in
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Shockwave Flash 10.1 r53
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *3.0.50106.0
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    Hello David.
    Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you want (probably to show your home page?). This is the very first option that appears in the options screen, but I understand that it may not be very easy to find. Firefox 4 will not include any redesign to the options screen (except possibly it appearing in a tab, rather than in a popup), but you may interested to know that there are plans to redesign the options screen for versions after Firefox 4, to make it easier to use. If you want to know more about the redesign, just ask.
    Anyway, if that doesn't help (it probably does, but just in case), it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.

  • I've just discovered that with the newest version of iTunes you can no longer delete apps you don't want.  You used to be able to do so by connecting to to desktop computer and delete them.  Tech support said you can't delete apps anymore.  Not Good!

    I've just discovered that with the newest version of iTunes you can no longer delete iPod Touch/iPhone apps you don't want.  You used to be able to do so by going onto iTunes on your desktop computer and deleting them.   Not Good!  I just called tech support and they said that in this version there is no way to delete them. They also said there have been numerous complaints about this.  You can't even delete them from your applications folder.  It's as though you're being held hostage to apps you tried, but do not want.
    While we're on the subject, I don't like the fact the the iPod touch comes with unistalable apps such as: Passbook, Nike & iPod, Newsstand, and Game Center. Don't want them, will never use them.  Give customers the option to delete apps that we don't want.  Call Apple's corporate customer care. escalation, and complain untill they fix this.

    Actually,
    Step 1:
    Step 2.
    Step 3.
    Step 4.
    Step 5.
    One of us must be wrong.

Maybe you are looking for