Is there a way to uncheck a whole CD at a time?

My iPod isn't big enough to hold all of my music. It's a huge pain to uncheck about a thousand songs on iTunes. Can you uncheck music by CD? How?

You can select a range of tracks by clicking the first track, then holding shift and clicking the last. You can add or remove individual tracks from the selection by holding down ctrl as you click. You can also check or uncheck all songs by ctrly-clicking on a checkbox. This makes it really easy to lose all of your selection. Unchecked tracks are skipped during normal playback in iTunes which you probably didn't intend when you started using check boxes to exclude media from your device.
Use playlists. The simplest is a playlist called, say, iPod Music into which you drag everything that you want on the device. If it gets too big just select some stuff to remove. Alternatively you can use a combination of regular & smart playlists, e.g. a regular one called Exclude and a smart one (iPod Music again) with the rules Playlist is Music and Playlist is not Exclude. If this list gets too big throw some more stuff into exclude or set limit criteria.
Unchecked checkboxes should really be used, in my opinion, to mark out things like bonus interview tracks that you still want to keep in your library but would seldom choose to listen to.
tt2

Similar Messages

HT4527 My laptop that currently has my itunes library on it is broken and so I can not access it. Is there a way of getting my whole music library put onto a different laptop?

My laptop that currently has my itunes library on it is broken and so I can not access it. Is there a way of getting my whole music library put onto a different laptop?

You can have two separate libraries, just do not put them into the same location on the computer. You could also create a new user on the laptop, you, and then you would start out with a blank iTunes library, then just add yours to that. It would also prevent you and your girlfriend from mixing content up unless you share an Apple ID.

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
   BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
     Start of subsequent processing ... 20140423011359
     End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

HT204411 is there a way to download my whole wishlist at once?

is there a way to download my whole wishlist at once?

No, there used to be a 'buy all' button at the top of the wish list screen but for some reason that has been removed from the current version of iTunes, so you can only buy items individually by clicking on their prices. If you would like a the 'buy all' option brought back then you could try leaving feedback for Apple : http://www.apple.com/feedback/itunesapp.html

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

Is there a way of "merging" songs in iTunes. Several times, I have downloaded from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs?

Is there a way of "merging" songs in iTunes? Several times, I have downloaded recordings from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs - Irritating!

Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

Is there a way to get my photos off an old time machine backup from an external hard drive?

Is there a way to get my photos off an old time machine backup from an external hard drive?

You will have to connect the Time Machine HDD and click on the Icon. You will see one folder called Backups.backupdb. Click on that and you will have to continue until you find the home folder. The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder. You will have to drag that to your desk top. Then you will have access to individual images.
Ciao.

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.

Is there a way to acknowledge multiple ical notifications at one time?

I turned on an iBook I haven't used is almost 2 years. ical popped up reminders from two years ago. Is there a way to acknowledge these reminders all at one time?

Filter the mail based on mail addressed "To: (Your email address). The action is to send it to the "trash " folder. In effect, the trash folder automatically becomes your Inbox. Save what you want by moving items from trash. Then touch "edit" "delete all".

Is there any way to record a whole call that is st...

My Skype recorder glitched and I lost the recording. The call is still going; is there a way to record the call from the beginning? Thanks.

Recording off Skype is like recording off the radio (if that's even done anymore), it's not like a DVR. The best you can do is continue to record the current audio. If you can resurrect whatever portion you saved earlier you may be able to splice the audio together. If your recorder didn't record it, then there isn't anything to retrieve since Skype doesn't record your calls.

HT201250 Is there any way to do a search iCal events in Time Machine backups using keywords?

Is there any way to actually look at what was in my iCal calendar, in calendar view, at the point in time of one of my previous backups?
And if not, is there any way to search the iCal backup files to find the ones with certain entries?
For example, I wanted to find all entries starting with Dr C, but the way the calender entries are listed in each "Events" folder they don't appear to be searchable. And scrolling through them is very cumbersome, especially since the calendars are identified by numbers, not names...
Any help that makes this easier will be much appreciated!
Thanks in advance.

The only way to do that would be to restore the whole Calendar database from a snapshot taken on that day.

Is there a way to open two months at the same time in iCal?

I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
Thanks!

Hi,
If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
Best wishes
John M

AddressBook - Is there a way to change multiple addresses at the same time?

To be clear....I have 25 contacts at 1 company and that company moved.
Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
Thanks!

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

Is there any way to view two tabs at the same time w/o opening a new window?

I would like to view one tab while I am working in another. I can do it by opening one of the tabs in a new window and tiling both windows on the screen. Is there any way to do it within one window?

Just installed Split Panel and it looks like it will do exactly what I want.
Thanks,
(Don't know how this got in here twice. I'd like to delete it but can't figure out how to.)

Is there a way to detect two keys at the same time?

Is there a way to detect the keys if the user is holding two keys down at the same time?

yes, but you'll have to check outside of the event loop (i.e. don't check for it in the keyPressed method).
just use an array of keys that keeps track of which keys are currently down and which are up. you could use a boolean array but I use an int array because... Im not sure I've just done it probably because of my C background. anyway, basic setup:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class MultiKey extends JFrame {
     int keys[];
     public MultiKey() {
          super();
          keys = new int[256];
          Arrays.fill(keys,0); // 0 = key is up
          enableEvents(AWTEvent.KEY_EVENT_MASK);
          show();
     public void processKeyEvent(KeyEvent e) {
          // the 0xff below binds the key code to below 256
          int key = (e.getKeyCode()&0xff);
          if (e.getID() == KeyEvent.KEY_PRESSED) {
               keys[key] = 1; // 1 = key is down
          else if (e.getID() == KeyEvent.KEY_RELEASED) {
               keys[key] = 0; // 0 = key is up
     protected boolean isKeyDown(int key) {
          return (keys[key] != 0);
     protected boolean isKeyUp(int key) {
          return (keys[key] == 0);
}so now at any time in your code you can check key state by using the isKeyUp and isKeyDown methods. this is about as close as you get to input polling in java unless you use LWJGL or something similiar ;)
you can try out a full executable example at my site here - just open up the jar and start holding keys down :)

Is there a way to uncheck a whole CD at a time?

Similar Messages

Maybe you are looking for