Is there a way to undo after Photoshop has frozen and you are working with a recovered file?

so this is exactly what happened...
I had been working on an edit for way too long and of course i didnt save it the entire time because im terrible i guess, I wanted to see what the deal with Lens Flare was so i went Filter>Render>Lens Flare to check it out. I hated it and immediately removed the flare with no problems. Then I was going to go back to Lens Flare to see if i could adjust it into something sort of decent but i accidentally went Filter>Render>Lighting Effects and it locked my Photoshop up (yes my computer sucks). I then started to panic because of the extensive amount of time i put into this edit without saving it. I opened Photoshop and thankfully it loaded up the recovered file i was working on. Unfortunately it has the terrible lens flare from my first attempt attached to it and im not able to undo or anything. Is there anything i can do to get rid of the lens flare? any help is welcomed. thank you so much for your time

Have you applied the Lens Flare destructively on the single Layer in the file?

Similar Messages

Is there a way of finding out how many active hours you've worked on a Premiere project?

If not, it'd be a very cool addition for Adobe to implement... so you know exactly how many hours a project is taking (and how much to charge clients etc.) Obviously we're all prone to leaving Premiere on and wandering away, so I guess it would need to be able to differentiate between active and non-active time...

Is there a way of finding out how many active hours you've worked on a Premiere project?
There are two things a client get's billed for, my time, and my computer's time. If either one of us are working on a project, the client get's billed. Even if Adobe spent (wasted?) time on adding such a feature, they'd never be able to include any time I've spent working on the project with PP closed, so this feature would have very, very, VERY limited usefulness.
The method suggested by the images is still the best way.

Is there any way to tell if someone has cleared and reused a lost Ipod touch? Or will it continue to show up as offline in Find Iphone app?

I have the app Find Iphone, and my kids' ipods are linked to the app because we share an itunes account. My son cannot find his ipod, in which, he took it on a mini-vacation with friends. He never took it out of their vehicle, but it may have fallen out at some point, just not sure. When I check my app, it simply reads offline. I want to know if there will be a way to know if someone has reset it (even if I cannot locate them)? I don't want to keep wasting my time looking to see if it somehow was connected to the internet when it has already been cleared. Help pleased?

Will it continue to say that the device is in lost mode if it has been restored? My Find Iphone is saying that when the device is connected to the internet that it will be locked and that a message (that I typed in) will appear. It also says that I will be notified and that a sound will occur when it is connected. Now my iphone has been updated to the ios7, but I don't think his ipod was updated.

Is there any way to get ipad 2 mirroring (beta ios 5) to work with unicast? The school won't enable multicast for traffic concerns on a many AP wireless network.

I have the iPad 2 mirroring working in my classroom with my own personal wireless router and an apple tv 2. We would like to deploy several iPad 2's to teachers for instruction, all using mirroring. The school district wireless network available throughout the complex has many access points and has multicasting turned off. They are afraid to enable it because of traffic concerns - many wireless devices all sending everything to every AP on the district wireless network. Is there any way to come up with an acceptable solution (unicasting?) that will only route traffic to the devices connected to a single access point on the network (the same one the ipad 2 and apple tv are connected to) without sending it to all the access points on the district wireless network? Short of every teacher having an independent wireless router in each of their rooms (which could still potentially interfere with the district wireless), I don't currently have a solution. I've heard the network guys through around terms like multicasting, unicasting, igmp, etc. I don't want to choke down the district wireless either, but there must be a solution to this. I could easily see 40 teachers in the complex all using iPad 2s mirroring through apple tvs attached to projectors all going on at the same time, but there might only be 3 or 4 on each access point.

I have the iPad 2 mirroring working in my classroom with my own personal wireless router and an apple tv 2. We would like to deploy several iPad 2's to teachers for instruction, all using mirroring. The school district wireless network available throughout the complex has many access points and has multicasting turned off. They are afraid to enable it because of traffic concerns - many wireless devices all sending everything to every AP on the district wireless network. Is there any way to come up with an acceptable solution (unicasting?) that will only route traffic to the devices connected to a single access point on the network (the same one the ipad 2 and apple tv are connected to) without sending it to all the access points on the district wireless network? Short of every teacher having an independent wireless router in each of their rooms (which could still potentially interfere with the district wireless), I don't currently have a solution. I've heard the network guys through around terms like multicasting, unicasting, igmp, etc. I don't want to choke down the district wireless either, but there must be a solution to this. I could easily see 40 teachers in the complex all using iPad 2s mirroring through apple tvs attached to projectors all going on at the same time, but there might only be 3 or 4 on each access point.

Is there a way for your backup to remember what songs you have downloaded with itunes match

i use itunes match, but i download the songs to my device as i have spotty service where i work and live.
i am upgrading to a larger size iphone and dont want to have to search through itunes match again and select all the songs i want to download again once i get the new phone. is there a way that itunes match will "remember" what song i have downloaded to my device and "re-download" them to the new device?
maybe via a playlist then just download the playlist? this seems like a lenghty way of doing it though.
anyhelp, tips or advice would be greatly appreciate. thanks

tazlines wrote:
is there a way that itunes match will "remember" what song i have downloaded to my device and "re-download" them to the new device?
No.

Is there a way to get the same design as my site to work with Wordpress?

I know BC is built with Module Tags etc, but will there be a way to build the template I bought to work with WordPress?

Hi Mate
There's no way to just grab a BC template and drop it into WordPress.
The html will have to be built into a wordpress theme.
This is fine to do it just takes some work. You can leverage off the code in the BC template to make it easier.
If you need help making this happen let me know, my guys are Business Catalyst AND Wordpress experts
Brett (skype = brett.stockley)

HT5525 I am ordering 27 seperate books for my class. I am a teacher. I dont want to have to pay the shipping cost for every book. Is there any way I can pay one shipping cost and you can send me all th books at the same time? Thank you. Linda Gleichm

I am a teacher and I am sending 27 books to be published. I don't want to have to pay postage on each book. Can you send them to me all at once and just charge me one postage fee. I can't aford to pay for postage for each child in my classroom. Thank you.
Linda Gleichmann

1 - we are users just like you - so not we can not do anything about bulk shipping
2 - Apple printing policy is that only multiple copies of the same (identical) book can be ordered in one order with one shipping charge - if you are ordering 27 copies of the same book then there will be one shipping charge for the order - if there are different bookd then there will be a shipping charge for each different order
see http://store.apple.com/us/help/print_products for more information
LN

Unable to Connect to WiFi after iPhone power off; WiFi & internet are working with MBP; common problem, no solutions?

Here's my setup: Internet <> Comcast/xFinity supplied cable modem <> new Apple Time Capsule <> iPhone 4 & MacBook Pro (see below for hardware details)
Internet on my iPhone 4 has been acting slow since yesterday evening. My MacBook Pro was running fine, but just to be sure I checked the Comcast website to see that I have only used 50GB of my allotted 250 GB of data for the month, so it's not that.
I decided it must be a problem with just my iPhone, so I opened up the multitasking bar and quit everything in there manually, and then I held the on/off button, and slid the slider to power off. When I started back up, I could not connect to the same WiFi I had just been using. I tried to reconnect and nothing. I tried to forget the network and try again, nothing. I tried to reset all network settings, nothing.
I have tried all the steps listed here: http://support.apple.com/kb/TS1398 "iOS: Troubleshooting Wi-Fi networks and connections"
Toggled WiFi off and back on
Made sure I am in range of the router (it's about 8 feet away and my iPhone reports full signal from the network)
Made sure all the hardware is connected and on
Checked other devices (I'm successfully connected with my MacBook Pro right now)
Checked for router firmware upgrades (I have a new Time Capsule from Apple with the current 7.5.2 firmware which I've been using for a month)
Restarted my device (again)
Checked that the network is available (it does show on my iPhone)
Restarted my Time Capsule
Checked my router configuration as described here: http://support.apple.com/kb/TS3727 "Wi-Fi: Unable to connect to an 802.11n Wi-Fi network" which involves simply checking to see that WMM is turned on, also stating that WMM cannot be enabled or disabled for Apple's AirPort products.
Reset my network settings (again)
I have searched and searched for fixes to this problem, and I have additionally tried:
Enabling/disabling Airplane Mode
Disabling any network password protection/encryption (no luck), re-enabling it (no luck)
Changing the network password
Checking for hardware addresses present in iOS Settings > General > About (they are present and not zero'ed out)
Switching Bluetooth off (nothing) and back on (nothing)
....and probably a few other things I can't think of right now
I have yet to try:
The "Freezer Trick" which apparently involves chilling the iPhone to get a temporary fix?
Restoring the iPhone (I would really rather not)
A different WiFi network (other than my own Time Capsule home network or guest network, both of which give the same Unable to Connect error)
So, after all of that, are there any more ideas? Is there a reliable solution to this issue? So far I've just seen a lot of "mess with the settings," "the freezer trick worked," and "blame it on the iOS 4 update."
Here are my hardware details:
iPhone 4; iOS 5; 32GB; AT&T; no cellular data plan (July 2011)
TimeCapsule6,113; Firmware 7.5.2; 2TB (September 2011)
MacBook Pro 3,1; Mac OS X (10.7.2); 2.4 GHz Intel Core 2 Duo; Hi-Res Display; 4GB RAM; 500GB HD (August 2007)
...and the Time Capsule config:
http://cl.ly/BCUt

Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
Jinkies.

Importing HD footage from A SONY HDR-AX2000. Imovie on the iPad does not recognize the footage. IS there a way to format my SD cards so that I can work with imovie on the Ipad??? I have a broken computer and a deadline for a project. Please help.

SO, a genius at my store told me there are some bugs to work through with SONy cameras and Apple. But I needed the sony camera because of how good they are in lowlight, among other features. Does anyone have trouble with Final Cut and there SONY cameras?? Is there a better video editing software??

Welcome to the Apple Support Communities
Microsoft will launch Office for iOS next year, so you have to wait, Instead of Outlook, use Mail on the iPad

HT5538 Hi there. I have tried everything to make iMessage and FaceTime to work with my number but it won't let me do it. I am moreover concerned as I have another sim forum my same carrier and it works fine with iMessage and FaceTime. I I really need help

Hi I have tried all the tricks from the support to have iMessage and FaceTime running but it is impossible for me to activate these apps with my phone number. Problem is I have another sim from the same carrier and I am able to do it on that one.
I am desperate for a help!
Thanks a lot

Can you make phone calls on the phone that won't activate? Is it only iMessage and Facetime that isn't working? What about data - can you access the internet?
Your last statement didn't make much sense to me: " I still can have the apps working but only from an email"
Pls explain that clearly.

The latest iTunes wiped out my apps for my 2G iPod Touch by overwriting updates which are no longer compatible with iOS 4.2. I tried to restore to an earlier version with no success. Is there any way to download the older versions of apps which are comp

The latest iTunes software wiped out my apps for my 2G iPod Touch by overwriting newer releases of the apps which are not compatible with iOS 4.2.1. I tried to restore the iPod to an earlier version without success. Is there any way to download older versions of my apps which are compatible with my older iPod?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

After I highlight text in my document is there a way to undo the highlight?

After I highlight text in my document is there a way to undo the highlight?

Nevermind -
I discovered the answer.
Hold the highlighted area and the option to clear pops.
I would have liked to see this info in the get started document.
great app!

Is there a way to undo or restore previous device software?

Hi All,
I just updated the device software on my blackberry and the device seems to run much slower than previously! Is there any way to undo all the changes that were made to the system software and apps?
I installed the apps using IE from off the web..... the loader told me that things would be backed-up. Using the Desktop software doesn't seem to work - the old backup file I have only restores data (addresses, etc) but not the system apps.
Yikes. After playing around with the new device software, I'm fairly unimpressed - applications take up more screen real-estate (i.e. more scrolling) - especially in the calendar - and the device works more slowly (that little hourglass thing takes forever!).
Please help!

Check this link: Blackberry OS FAQ
There are instructions how to downgrade your Blackberry OS, and there are links to download necessary software.

Is there a way to undo a crashed firmware update?

Well...what now? I ran the latest firm update and viola', it hung in a closed loop and finally after an hour I cancelled and now my great running EA4500 is now an expensive plastic paperweight. Is there any way to undo the "damaged" eprom/firmware update.
I'm electronics capable and willing to rip off the cover and replace the eprom, if possible, like we used to do in the the old, old days replacing the bios!
Solved!
Go to Solution.

Was the update being done via wired or wireless connection?
Always do a FW update over a wired LAN connection.
You might do a search on the support site for 30-30-30 reset to see if this can get you recovered or to a page where you can reload the FW load.
Future use:
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.

I made a dumb decision to 'Erase Free Space' on my drive. I now have no free space, I realize because it wrote 0's over all my free space. Is there a way to undo this??? Help please I can't save any documents now! Thanks in advance all, it is truly apprec

I made a dumb decision to 'Erase Free Space' on my drive. I now have no free space, I realize because it wrote 0's over all my free space. Is there a way to undo this??? Help please I can't save any documents now! Thanks in advance all, it is truly appreciated. how can find the hidden temporary files using the terminal what do i type in?

It's more likely a failed Erase Free Space, which creates a huge temporary file; that's why it looks like you have no more available drive space. You can recover from this. See these links
https://discussions.apple.com/message/10938738#10938738
http://www.macgeekery.com/tips/quickie/recovering_from_a_failed_secure_erase_fre e_space
Post back if you need any help with this.

Is there a way to undo after Photoshop has frozen and you are working with a recovered file?

Similar Messages

Maybe you are looking for