Is there a way to upgrade the iOS software to 5 only by means of bypassing the automatic upgrade to 5.0.1?

I believe that we all know the latest version of iOS now has an issue with regards to battery life. I proved it and tested it to my iPhone 4S. Few days ago, the battery life of my iPhone 4S, last for one week (almost) in a stand by mode without charging it. It's version running iOS 5. Upon upgrading it to iOS 5.0.1, I notice that every half an hour or less, it drains from 1% - 5%. But it stating that the upgrade purpose is for the battery issue so on and so forth. It's totally the reverse side.
Now, my main concern is, I recently bought an iPad2 with running iOS 4.3.5. I really like the version or the iOS 5. Is there a way that I can just upgrade it to version 5 only? I don't like the iOS 5.0.1 which is the latest version because of what happend on my iPhone 4S. Is there a way too to downgrade it?
Please help me and thanks in advance. 

Probably not since you may have a 1G ipod.  The 1G can only go to 3.1.3.  You can identify yur iPod here:
Identifying iPod models
If you have 1G you can get 3.1.3 by going here. You may have to use a different browser to get the sublink to work correctly.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
If you have a 2G you can go as high as 4.2.1.

Similar Messages

  • Is there a way to change the automatic optimization of the Thumbnail images in Webgallery?

    Is there a way to change the automatic optimization of the Thumbnail images in webgallery found in Photoshop (CS3 or Photoshop elements-- I have both)?  The thumbnails come out so blurry that it's embarrassing (for an art site). Thanks.

    Thanks for your response. Your websites look great!  You are to be complimented on your fine design work.
    I've been doing custom sized thumbnails, at around 300px, but they are still a little blurry, like when JPEGs are over optimized and some isolated areas look like they are churning, one shape melting into another like boiling water.  Then, I tried even larger thumbnails, and then shrunk them to a smaller size using HTML commands, hoping  that shrinking them smaller would help tighten up the blurry churning areas. They looked a little better, but the churning areas remained.  When I open up the individual thumbnails in Photoshop and I try using the unsharp mask or the sharpen function, it gets even worse.

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • Is there any way can stop the automatic mode channel?

    Hi Expert,
    I wanna confirm if there are anyways can make the automation mode channel to be stopped, excepting stop the channel in
    the "Runtime Wrokbench" of the Browser by manual.
    I expect the manner as using the Http Request to stop the channel.
    Is there any way?
    ( I consider maybe the way using Http request to stop the automation mode channel is not viable. cause I got the error msg describe as follows:
    The channel "GSCMDRECEIVERBJ/XIF_JAVA/APS2GSCMDBJ_RECEIVER_CC (GUID 9c094a53361438e6947efba69a4c7715)" is configured to use an automation mode not compatible with the type of the current principal (WSUSER). The channel was not started. Change the channels automation mode and repeat the administrative action. )
    Thx in advances.
    Brian

    Hi Brian
    Check this blog " Control Communication Channels Externally without using RWB "
    /people/william.li/blog/2007/05/04/control-communication-channels-externally-without-using-rwb
    I guess it might help you
    Regards
    Harish

  • Is there a way to disable the automatic crash report thing...

    I visit a web site that all of a sudden after the "upgrade" I can use flash on, it throws up the flash has crashed message when it really hasn't (IT is a singing site and the flash program scans for your microphone, webcam, etc..and FF throws up the message on the scan)
    I know flash isn't crashing because it DOES work (Same Flash plug-in) with other browsers and has worked fine with FF until the upgrade
    == URL of affected sites ==
    http://

    There's no way to disable it but you can set -maxsupportlogsize and -maxuserlogsize
    to something like 0x7fffffff and do your own rotation. When your rotation script moves
    the current .log files out of the way the daemon will notice and create new ones.
    Chris

  • I have two questions.  How do I burn a DVD from a slideshow created in IPhoto without using IDVD which is no longer available?!!  And is there any way to control the automatic zooming in my slideshow?

    I know IMac messed up by no longer offering IDVD OR ILIFE on their new computers. Yes I too am mad I spent the money.  But does anyone have a solution  on how to work with the limited programs I did get?  Or what programs do you suggest I purchase to be able to do something as simple as burn a slidewshow on a DVD!!!!  I already purchases Xilisoft DVD which does not allow for photos only videos.  I want to use both!  I have had my new mac less than a year.  Can I still return it?

    If you contact Apple at
    U.S. iPod, Mac and iPad technical support:
    (800) APL-CARE (800-275-2273)
    You should be able to get a copy of the original DVDs for  a nominal charge.

  • Is there any way to discontinue the automatic list feature.  I can't....

    I can't get it to stop listing (numbers) or when i return it, it continues listing.

    Well, that disables the feature which automatically starts numbering - it doesn't stop numbering in a list that you have.
    To do that, press return twice.
    If you sometimes want auto-numbering and other times don't, leave *Automatically detect lists* enabled, and just undo when it kicks in unwanted — pressing return generates two undo actions when starting to auto-number a list: undo once and it undoes the auto-numbering. Undo a second time, and it undoes your typing.

  • My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS?

    My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS?  Do I have to go to Settings>General>reset>Erase all content and settings before I can get the newer ios?  If this is the case, how can I ensure all my content is backed up prior to erasing it all. Is there anyway to check to ensure the backup is complete and comprehensive?  THanks!

    A second generation iPod touch can't be updated past 4.2.1.
    (88824)

  • HT204368 I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade. Is there a way to restore the previous os version?

    I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

    I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

  • I have an iPad1 which I have reset and am preparing to give to a kid.  I now find that I can't reinstall many apps as they now seem to require IOS 6 or greater.  This is IOS 5 and can't be upgraded.  Is there a way to find the older versions of the apps?

    I have an iPad1 which I have reset and am preparing to give to a kid.  I now find that I can't reinstall many apps as they now seem to require IOS 6 or greater.  This is IOS 5 and can't be upgraded.  Is there a way to find the older versions of the apps?

    One of these links may help:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • Is there a way to upgrade the iOS software on a an IPod Touch 2.2.1?

    Is there a way to upgrade an IPod Touch 2.2.1 to iOS 4.0 software?

    Probably not since you may have a 1G ipod.  The 1G can only go to 3.1.3.  You can identify yur iPod here:
    Identifying iPod models
    If you have 1G you can get 3.1.3 by going here. You may have to use a different browser to get the sublink to work correctly.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    If you have a 2G you can go as high as 4.2.1.

  • I have an ipod touch (4th gen) and just bought a clock/charger/player.  It says I need ios 4.3.  I keep getting a message saying I can download 6.? but it will wipe out everything on my ipod.  Is there a way to get the ios without wiping out my files?

    I have an ipod touch (4th gen) and just bought a clock/charger/player. It says I need ios 4.3. I keep getting a message saying I can download ios 6.? but that it will wipe everything off my ipod.  Is there any way to get the ios without wiping out my files?

    There is no supported method to "downgrade" iOS on any device.  If you update, you will get the latest iOS for your device, which will be iOS 6.1.3.  You cannot go backwards to iOS 4.3
    If you have never backed up in either iCloud or iTunes, then upgrading to iOS 6.1.3 will involve restoring your device as part of the upgrade.  Without a backup to restore from, you will loose everything that is on it.
    You should first connect to iTunes with your computer, sync your device without upgrading and create an up to date backup of everything.  Then use the upgrade option in iTunes to update your iOS.
    However, if the dock device strictly requires iOS 4.3, it will not work, as you cannot downgrade iOS.  There simply is no mechanism from Apple to do that.

  • Is there a way to upgrade IPad 1 to iOS 6?

    My iPad 1 running on iOS 5.1.1. My applications are frequently crashing. Is there a way to upgrade IPad 1 to iOS 6?

    None of us are going to argue with you, but hardware changes, and more rapidly these days. The original iPhone doesn't run very much at all, and of course it can't even run 3G. But some people are happy with it. Non-Intel Macs can't run the latest OSX.
    Apple needs to be competitive by making the fastest and most modern tablet it can, and that means within 3 or so years what I have now could be antiquated. That also means Apple has to make a decision about whether to try to force the operating system to continue to be backwards compatible which may have speed issues, for example, for those who have current hardware.
    iOS 5.1.1 is very advanced. It's only really missing a few things from iOS 6.1, some of which a LOT of people don't like. Maps is one. The loss of Google Maps is another.
    There is nothing you can do. Most Apps don't let you update if it is incompatible with your current iOS, so you should be all right.

  • Is there a way to upgrade my old iPad with iOS5 to iOS 8?

    Is there a way to upgrade my old iPad which has iOS 5.1.1 to the new iOS 8?

    If it's a 1st generation iPad, no. If it's a later iPad, iOS 8 will be available under Settings > General > Software Update.

  • Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page   lines?

    With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

    A number of posts have reported the same issue, two workarounds:
    1
    check the paper handling options or equivalent in your print dialogue box and set to scale to fit
    2 
    in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
    then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

Maybe you are looking for

  • Blank DVD and CD not showing up in Finder or anywhere

    My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.

  • ITUNES DOESN'T OPEN

    itunes doesn't open

  • Regarding BDLR, SXDB and BMVO Tcodes

    Hello, I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system. I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATI

  • While creating function in prg unit there is an err

    Oracle forms6i Hai All i have created a function using program unit i have an error PDE-PPU107the program unit source must be declared as subprogram body or a package Pls give me solutions Thanks & regards Srikkanth.M

  • InDesign 9 acting weird

    Sorry for my bad english but I will try Since yesterday problems InDedisgn 9.2.2 When I want to make a 0.5pt line a pup-up appears: Invalid numeric value When I try it in the pup-up window on 0.5 it also does not work and then it will set back to 0.