Is there a way to upload html pages into the DAM?

I'm trying to test out email templates that are outside the current email templates we have already built in CQ5.
We're trying to de-commission an old server that we used to upload this out of the box email templates to and trying to utilize CQ5 dam.
We're currently using Campaign Manager to send our email blasts.
Thank you!

You can reverse the process of how you exported the information using SQL to import the new information.
I think you will need to restart the planning service for it to take effect, best to test it on a dev environment until you are comfortable with the SQL
Or you can use LCM, use LCM to export supporting details, then look at the xml document for the format.
You can then create your own XML document and use LCM to import it in.
I would probably try the LCM route first.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Is there a way to upload files directly to the cloud from bridge cc?

Is there a way to upload files directly to the cloud from bridge cc? I use bridge to organize my files. It would be a lot easier if I didn't have to drag and drop files into the cc folder, I was hoping that there might be an easier way.
thanks,

When you save them just make sure you save them to your Mac and not iCloud. For those that already exist, you can move them from iCloud by dragging and dropping them to somewhere else on your Mac. To see all the files in iCloud choose file > open in either pages or numbers.

Is there a way of hiding certain pages from the preview at the bottom of the ipad screen in ibooks author?

Is there a way of hiding certain pages from the preview at the bottom of the ipad screen in ibooks author?
I'd like to only show the first page of a section in ibooks author's preview.

Thanks for your reply, Ken. I did start a separate topic for this but it didn't seem to publish properly.
I've posted it again here:
https://discussions.apple.com/message/19816933#19816933
I assume you don't know why this is happening to my TOC?

Is there a way to make all page margins the same?

I've exported a book file from indesign. Since the pages were in a book-type spread, the odd and even pages have different margins. The odd page has the bigger margin on the left, while the even has the bigger margin on the right. Is there any way to make these identical after the fact. I can't go back and redo the indesign file.

Thanks, there are 382 pages. Can't do them one by one. And I purposely made the margins different in indesign, to give people more space in the middle. The margins are as follows:
But when I try to reverse the inside outside on one page of the spread, just reverse them, so the dimensions are the SAME, all the text and photos move.

Is there a way to combine multiple pages into a single document?

In the program "Pages," is there a way to combine multiple pages in a single document?

Jean Louis Gassee, who used to be a senior Apple executive, wrote on Apple's bad approach to the latest iWork suite:
https://discussions.apple.com/message/25209121#25209121
Peter

Is there a way to upload Supporting Details into a cell in Planning?

Is there a way to upload Supporting Details in a cell in Planning from a couple of rows of data in Excel ?
We have a lot of supporting details in excel rows that we want to load into one cell in Planning Web form 11.1.1.3.
I know how to extract Supporting Details from Planning's RDBMS repository, but has anyone successfully reverse that process and update Planning's Supporting Detail Tables with data?

You can reverse the process of how you exported the information using SQL to import the new information.
I think you will need to restart the planning service for it to take effect, best to test it on a dev environment until you are comfortable with the SQL
Or you can use LCM, use LCM to export supporting details, then look at the xml document for the format.
You can then create your own XML document and use LCM to import it in.
I would probably try the LCM route first.
Cheers
John
http://john-goodwin.blogspot.com/

Is there a way to paste an URL into the file selection dialog box?

Hi,
I would like to share on Friendfeed.com images that I find on websites. On Windows, I click on "Add - photos" and I can paste the URL of the image directly into the dialogue box.
On my Mac 10.6.6, I can't find a way to do that: the dialog box only allows me to click on a file's name, I can't paste anything. So I have to save the image on my disk, and then upload it on Friendfeed.
It's not a big deal, but still more cumbersome.
Is there a way for me to avoid saving the image on my hard drive?
thanks for any help that will come this way

Thomas, you really need to relax I just asked a simple technical question: is X technically possible?
There were only two meaningful answers to that: yes and no.
But, no, you and others started to imply there were some dark issues of image copyright infringement, which - if I was not very relaxed myself - would be offending. You don't know what images I'm talking about, so why in the world did you start by assuming that I was infringing copyright?
(read again my previous answers to you, and you'll see I was not condoning infringement. I was simply saying it was not an issue here). Are you going around the web entering any discussion about how guns work, warning that killing people is a crime? What about knifes? Car forums and speed limits? (I could go on, as you can imagine).
But, since we're talking about copyright, you may want to lower your expectations about how "easily" you could sue me. The world - and its legal systems - is quite a different thing from the USA, you know.
Finally, about Friendfeed. Read again what I wrote (leaving aside all the copyright concerns that are distracting you ) and you'll see I mentioned that of course there's a "normal" way to enter the Url. It's just two different actions, with two different results. One of these actions is apparently not possible with a Mac. Too bad. As for Friendfeed being a crappy website: I see you're a web developer. I wish you to be as successful a developer as the people who created Friendfeed (http://en.wikipedia.org/wiki/Bret_Taylor). Some of its functionalities were years ahead of the competition, which is why they have been acquired by Facebook, and today - after more than a year with no development whatsoever - they still make for a very good social network. Go and have a look at it, you may learn a thing or two.
(I wrote finally, but I was wrong). One more thing: I couldn't resist, and I took a look at your webpage and resumé. I'm not going to write here what you did from "August 1997 to August 2007" (although it's public, so it shouldn't be a problem). But let me express my full appreciation for that! (I'm serious).
cheers!

Using iOS 7 on my iPad, is there a way to put an event into the calendar without having to scroll down to calendar and select "home" every time? My friend's iPad retains that setting but mine doesn't .

Using ios7 on my iPad, is there any way to enter a calendar event without having to scroll down to calendar and selecting "home" every time? My friend's retains that setting, bu mine won't .

Settings>Mail, Contacts & Calendar
Scroll till you see calendar and set default calendar to the one you want.

Is there a way to print a page of the same address.

Using address book to print addresses, I would like to be able to print several of the same address on one page of labels. Is this posible? If not is there athird party app. that I could use?

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

Are there any ways to put lumped elements into the electromagnetic simulations?

Hi there,
I am using the AXIEM electromagnetic simulator of AWR microwave office to design a nano electro mechanical system (NEMS). I want to replace some parts of my NEMS with corresponding lumped elements to simplify the problem. Do you have any solution? Thanks in advance.
Anxaki

If you start with a circuit schematic and layout, then you can use extraction:
https://awrcorp.com/download/faq/english/videos/extract_video_tutorial.aspx
Otherwise, if you are drawing everything in the EM simulator, you can place ports in the EM structure wherever it connects to lumped elements, then place the EM structure in a circuit schematic as a subcircuit, and connect the desired lumped elements to it there.
Of course, this is if you intend to make circuit measurements like s-parameters. Is that what you need?

HT1451 I ripped a 2-cd album to iTunes on my PC. It downloaded as 5 separate albums. Is there a way to combine those back into one album?

I ripped a 2-CD album to iTunes on my PC. It downloaded as 5 separate albums. Is there a way to combine those back into the original one album?

Yes there is tho it may get pretty redundant if you have many 2-CD albums as i had once. Using the "control" key select all five albums. Right click the selected albums and select "Get Info". If this is your first time it may ask you if you are sure you want to edit multiple albums. Click "Yes". Fill in / affirm the correctness of the grid in fron of you. Check all of the boxes BUT THE TRACK # BOXES AND ARTWORK . This will tell iTunes that all of the albums are one and the same. click "ok". One album with the correct title should appear. Select all the tracks that were on the second disk and again right click and select get info. enter into the disk # space "2" of "2". If your version of iTunes is up-to-date this will make it a 2 disk album. If you would like you get select "Get Info" again just to make sure all is good.
Hope this helps.

Is there any way to upload iWeb files updates only with a 3rd party ftp program to a new hoster, e.g. Godaddy? I see no posts newer than 2007

Is there any way to upload iWeb files updates only with a 3rd party ftp program to a new hoster, e.g. Godaddy? I see no posts newer than 2007.

If you are using iWeb V 3, there are two other options for publishing the site...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

Any Way to display HTML pages on Applet

Hi All,
Is there any way to show web pages on Applet?
Is it possible ?

I am not aware of a simple way to display HTML in an applet. However, I have used the JEditorPane to display HTML documents. Handling links, etc. with this component requires some effort. Also requires Swing.
Have you considered using the applet to display a page on the browser. (i.e. getAppletContext().showDocument(URL, [frame name]))? Just an idea.
Good luck.

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)

I believe you just are able to delete them from iTunes.
Hope it will be helpful

Is there a way to upload html pages into the DAM?

Similar Messages

Maybe you are looking for