Is there a way to use a Master Password only to view Saved Passwords, without having to type it in every session?

If anyone ever uses my computer, they can easily see my Saved Passwords. I want to be able to secure them. The only way to do that is by setting a Master Password, which is great, but I don't really want to have to type it in every time I open up my web browser.
I couldn't seem to find this anywhere in any searches. Is there an Add-on or tweak that can set a Master Password only to protect my Saved Passwords?

Thanks, Matt. In my case, the monitor definitely shuts off when I unplug the power from my laptop in clamshell mode. If the lid is open, however, the monitor continues to function even without the power adapter plugged into my laptop. Ideally, I'd like to have the lid closed on my laptop and be able to use the external monitor without having the power plugged into my laptop. That's what doesn't seem to work - if your does, please let me know if you have any pointers.
Thanks again!

Similar Messages

Is there a way to use my time capsule as a wireless access point without having it being connected by eithernet thru my DSL

Is there a way to use my time capsule as a wireless acess point without connecting the eithernet cable to my DSL modem

Do you have another router? If not, then the TC must be connected to the modem by Ethernet cable for you to have a network.

Is there a way I can copy an auto signature automatically into my contacts without having to type a new contact myself?

Is there a way I can copy an auto signature from an automatically into my contacts without having to type a new contact myself?

You don't buy an unlocked phone. You buy a Verizon iPhone at full retail. I just did this myself last month. I paid full retail for the phone and activated it on my plan. This allowed me to get a new phone before I was eligible to upgrade and keep my unlimited data. I also got a good deal on trading in my iPhone 5.
You can buy the phone through Verizon or through Apple. If you buy it through Apple, I'd suggest that you not have them activated but do that yourself by logging into your account on your computer.
Best of luck.

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Is there a way to put a large amount of music on your iPod without having to keep all the files in iTunes on your computer as well? I want to put my entire music collection (including cds) on my iPod but don't want to take up the space on my computer.

is there a way to put a large amount of music on the ipod without having to keep all the files on itunes as well? I want to use my ipod as an externa drive and put all of my music on it without taking up the space on my computer. I also don't want to lose all my files everytime I plug ipod into my computer. Is this possible? Is there a way to avoid using itunes and only use the ipod as an external drive?

You cannot put music onto your iPod without using iTunes, that what iTunes is for.
It's also not a good idea to wipe the music from your computer and having it only on your iPod. We see countless posts here from people who have done just that - and then lost everything when the iPod needs a Restore. Even if you never need to Restore your iPod, what happens when you eventually replace the iPod? You'll be back here asking how to get the music from one iPod to another. That's not easy to do, we see countless posts about that too!
A much better idea is to buy an external drive (a proper external drive, not simply an iPod) and put your large amount of music onto that drive. Then point your iTunes Library to that drive. However, you need to remember two things:
You still need a backup of that Library.
Using an external drive as your iTunes Library means that the drive must be connected and ready to read before starting your iTunes programme. If it isn't, then iTunes will look on the C: drive - and you will find no music in your Library. (Once again, lots of posts about that as well!)

HT201335 Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?

Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?
I've been trying to get my iPhone screen to play onto my macbook.

There are no free ways to do it that I have seen. However, Reflector is reasonably priced. http://www.airsquirrels.com/reflector/

Is ther a way to send music to multiple airplay speakers on my ipad without having to use itunes

Hello all, l have a question that relates to air play and my ipad 4.
ls there a way to send music to multiple airplay speakers with my ipad 4 without having to use itunes as the master controller on my other PC. l know it is possible with itunes, but surely the ipad should be able to play to more than one airplay device at a time, we are living in the year 2013.
Is there an alternative and if there is not, could someone please explain or point me in the wright direction why it is so!
Thank you all in advance for your comments

Yes there is and I'll be happy to email you how. [email protected] is my address.

Is there a way to use berkeleydb in memory only mode?

Hi, all,
I want to use berkeleydb as memory only mode, I don't want data to be stored as db file.
Is there such way and how to implement it?
Regards,
-Bruce

Hello,
Please see the "Memory-only or Flash configurations" documentation at:
http://docs.oracle.com/cd/E17076_02/html/programmer_reference/program_ram.html
Thanks,
Sandra

Is there any way to play content from my iphone 5s to my HDTV without having internet?

I am moving to an area of coastal New England this week that is secluded and is not serviced by internet or cable and satellite is shoddy as well. I have an an iphone 5s with unlimited data and it gets good enough service to use itunes or stream netflix. But I would like to use airplay or mirror to stream Netflix from my phone to my samsung TV. I originally thought you could use Apple TV with apple devices and not need internet to do so, but I was wrong. Is there anyway to make this work?

Yes you can stream to ATV without internet acess but your plan is not going to work. First off you will burn though your bandwidth limits on your phone is about a hour or two, maybe a day at best. Second, it would be WAY to slow and be jerky video at best. Third AirPlay can not display copyrighted video. So video from sources like HBO, Netflix, Hulu, Amazon, etc get blocked because the copy right holders require it.
Your best bet might be to store shows on your iPhone, iPad, or laptop. You will also need a router to act as a go between. And it will likely still be some what low quality doing it this way.

Is there a way to log out of my itunes or app store account without having the device?

is there a way to log out of anitunes and app store account thats on a device, without having the device?

It prevent using the account change the account password on another device

Is there a way to send incoming 'Blocked' and 'Unknown' calls directly to VM without having the call ring or vibrate? (iPhone 5, iOS 7)

I'm tired of getting calls from sales and /or winning a cruise. How can I automatically send incoming calls that are either 'Blocked' or the number is 'Unknown' directly to Voice Mail. I would like to skip the ring and the vibrate (I do have a silent ringer tong tone that I can use, but it only works if the ANI shows a number). Thanks.

You might find THIS useful.

How do I use the same bluetooth device with different iOS devices without having to "Forget" then "Pair" every time?

Hi,
I have bought a pair of Sennheiser MM100 wireless headphones and they are great, however, I'm having trouble switching between devices.
I have an iPad2 and an iPhone 4s and the headphones connect to both with no problems. My issue comes when I want to switch from using the headphones with my iPhone (listening to music on the walk to the train station) to using them with my iPad (to watch a movie on the train). The iPad still shows that it is paired with the headphones but will not connect saying that they must be turned off or out of range. Even if I turn the headphones off then on again, they immediately reconnect with the iphone.
I've tried deselecting the headphones as the source for audio from the airplay icon before I make the switch and have also done this before turning them off and then back on again.
The only way I can make the switch is to turn the headphones off, tell the iPad to forget the device, turn the headphones on (by holding the on button for 5 seconds it automatically goes to Pair mode). I pair up the iPad and it connects fine. But I have to go through the same process when the train pulls into my stop to be able to use the headphones to listen to music to walk to work!
Is there an easier way? I thought I would just be able to use the airplay icon to deselect it on one device and select it for the other.
Any help would be much appreciated. I'm going to miss my stop on the train some day!!!

Here's the trick.
turn on the headphones.
It will connect to the device it last connected to ...assuming that its' on.
go to the bluetooth menu of your phone or ipad (if it's a computer you want to connect to I'll tell you that trick in a second.
and so now, hold down the S button on the headphones for about 4 or 5 seconds (the same button you use to turn on the headphones) ...the light goes from blue to blinking red....now you're in the pairing mode...which is good...now in the bluetooth menu simply select the mm100 and it will connect...
you won't have to type in the 0000 or tell it to forget the device..
but by holding down the button and putting it in pairing mode it frees it from being connected to the device it automatically connected to and lets it connect to the device you choose. this is true of any bluetooth headset.
if you want to connect to your computer, again...hold down that button on the headphones for 4 or 5 seconds till it enters pairing mode, then on your computer if you have a speaker icon in the menu bar, hold down the option key while selecting the speaker icon...you'll see a list of devices ...select the mm100 and your good to go.
if you don't have the speaker icon there..go to system prefences and choose the mm100's there.

Is there a way to use a statically defined appearance stream in a dynamically created annotation?

Hello,
I want to create a document with cascading 'popups'. Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images. I'm currently using widget annotations based on a pushbutton field.
Each page in my document has many citations that refer to other pages in the document. When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination. However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc. In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object. However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
Is there a way to use a statically defined appearance stream in a dynamically created annotation?
Thank you,
Dave

Hi George, I've gotten named APs to work, and I expect hidden buttons will follow. Thank you very much!
Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups. However, I don't want to store identical icons in each document on account of file size.
Instead, I'd like to store one instance of each icon for all documents in the file.
Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
Thank you again,
Dave

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Is there a way to use a Master Password only to view Saved Passwords, without having to type it in every session?

Similar Messages

Maybe you are looking for