Is there a way to use a text field as a rollover?

I have a PDF that contains tables with bullets in them. I would like the end user to be able to rollover a bullet and have a part number appear.

It's easier to use buttons, either by taking advantage of their rollover label, tooltip text, or by controlling the visibility of another button as demonstrated with the following sample: https://acrobat.com/#d=aP-2xL45pM57xVkT6d6fSg

Similar Messages

Is there a way to use Photoshop's field blur, iris blur or tilt shift blur straight on AE?

I want to use photoshop's selective blur effects on several footage. I know I might import the footage on Photoshop and just apply the effect on the video sequence, but this workflow is rather incomfortable for a whole bunch of clips.
Is there a way to use either those filters or reproduce their behavior straight on AE?

You can pretty much recreate all of them using effects like Compound Blur or Camera lens Blur wit ha custom matte and you can expand this further by getting a plug-in suite like REvisionFX' SmoothKit where you have even more sophisticated adaptive blurs.
Mylenium

Is there a way to use a date field and conditionally change its LABEL?

Hi I have 2 date select lists and desire to change the label text at runtime.
If I use it for one query it would be Order Date, another it would be Start Date.
?? BillC

Vikas,
...a page template is a special case since everything is finally rendered on a page.Don't know what you mean.
references in page templates probably get evaluated first...References in page templates get replaced with their session state values when the portion of the page template containing the references is rendered, e.g., before the box, inside the box, after the box, in the footer..., and within each section each item reference is replaced "when it is encountered" with the current value of the item from session state.
There is a Before Footer computation that sets that item to the current timestamp.I see an "After Regions" computation. On your page, the form item is rendered using the current (from the previous page request) value of the item in session state. Then your compuation sets a new value. Then the remaining sections of the page template (after the regions) are rendered and you see the newly computed value in the footer section of the template.
Is there a way to pass in the current form item name to the shortcut so that I can have a generic shortcut that returns a different value for the label depending on which item it is being invoked from?Starting in XE and now in 2.2, you can use the strings #CURRENT_FORM_ELEMENT#, #CURRENT_ITEM_ID#, and #CURRENT_ITEM_NAME# in shortcuts. This makes PL/SQL Function shortcuts such as the following possible: if '#CURRENT_ITEM_NAME#' = 'P2_ENAME' then
    return ('employee name');
elsif '#CURRENT_ITEM_NAME#' = 'P2_JOB' then
    return ('job');
else
    return ('foo');
end if; Scott

Is there a way to create a text field that shows on all slides?

I'm trying to create a "Revised On" date field that can be shown on every slide. Or, do I just have to copy and paste on all slides?
Thanks in advance.
- Michael

use the master slides
view > show master slides
click on the master slide that has a tick mark
add a text box to master slide and any other objects that you want on every slide; enter text, then position, size and set colour
click on the normal slide and add other content that is to be seen on that slide only
adding new slides will use the background design

Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

I used to have a IPhone3 about three years ago, unfortunately i do not have it anymore. My question is is there a way to obtain deleted text messages from my phone number from a short period of time before i got rid of my phone?

About three years ago in 1012 I had an iphone3 sent and deleted text messages of course and as of now those text messages are needed for an upcoming court case i will be involved with. So is there any way to retrieve those text messages from three years ago. I am just in need of the text messages from February 2012 on. So its about 6 to 10 months of texts. what do I have to do to get them back if possible???

As the others noted, if you don't have any older iTunes backups then the deleted messages would not be recoverable. The free trial of Decipher TextMessage will show you if there are any text messages in your older backups that can be recovered.

Is there a way to use a statically defined appearance stream in a dynamically created annotation?

Hello,
I want to create a document with cascading 'popups'. Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images. I'm currently using widget annotations based on a pushbutton field.
Each page in my document has many citations that refer to other pages in the document. When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination. However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc. In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object. However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
Is there a way to use a statically defined appearance stream in a dynamically created annotation?
Thank you,
Dave

Hi George, I've gotten named APs to work, and I expect hidden buttons will follow. Thank you very much!
Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups. However, I don't want to store identical icons in each document on account of file size.
Instead, I'd like to store one instance of each icon for all documents in the file.
Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
Thank you again,
Dave

Is there a way to use PM4.0 with Windows XPH?

Is there a way to use PM4.0 with Windows XPH without purchasing the latest suite or upgrades? I origionally purchased a suite with Pagemaker, Photostyler and Freehand just before Aldus went Adobe, and Win3.1 went Win95, then WinME and WinXP. I miss PM and have several manyscripts saved on PM4.0 and can not export or import them to any current wordprocessing programs. I was very far into one manuscript and am now in a position to finish it up but don't want to have to purchase a whole suite in order to do so. Any suggestions for this old tightwad? [email protected]

Jay Chevako wrote:
Find an old computer and run win3.1.
Jay
Shouldn't that be Win3.0 c.1991? And with a very early of version ATM (Ver 2?) if you want to do anything with fonts?
I think I have a WinME PC in the garage, which if you can re-format with DOS 5 and install Win3 instead (I may have the disks in the garage too), PM4 will positively scream along.
I reckon it's non starter on a modern WinXP PC, as the OS is so different, but if you're willing to experiment, you never know!
But if you want to open some old files to extract the text, you can open the PM4 files and save them with a d/l'ed trial copy of PM7, which will be OK on WinXP
Iechyd da! John
23:45 27/04/2009

Is there a way to tighten a text bounding box?

Hey all,
I've looked before but never found a definitive answer to this question:
Is there a way to tighten the text bounding box without converting it to outlines?
I work for a screen printer, and want to figure out a way to tighten the bounding box without changing the leading and without converting it to outlines in order to be able to edit said text. We deal with a lot of clients who send us names, that are often misspelled, and after an initial proof need to be corrected. Sometimes we need to center this text to an object.
Illustrator's bounding box, unlike that of Corel (which is our primary program, and won't open AI files) includes the leading below the type, so when you center it, it's not visually centered:
So I guess my real question is is there a way to get the text centered (as seen below) without converting the text to outlines, or messing with the leading, or is there a way to tighten the bounding box?
Thanks in advance!
-K

Combat and Dandreu,
You may use this silly way:
1) Tick Edit>Preferences>General>Use Preview Bounds;
2) Select the Type and Effect>Path>Outline Object.
That will reduce the Bounding Box to the actual bounds of the letters so you can centre as you wish.
Remember to untick Edit>Preferences>General>Use Preview Bounds before you get a reverse issue.

Is there a way to make keyboard text shortcuts work better?

For example: omw = On my way!
On iOS these work accross the board, but on OS X they only seem to work on certain applications. Such as TextEdit, but have limited or no use in other applications. They work ok in the URL bar in Safari, but try to use them in a text field (such as the one I'm typing in now) and they don't work. It's especially irritating when I try to log into a website, and I can't use my custom shortcut for my email address. I can easily do this on iOS, but not OS X.
Is there any way I can get text shortcuts to behave better on OS X, or is this a hopeless dream...
If you don't know how to access them, it's:
System Preferences -> Keyboard -> Text (OS X)
General -> Keyboard -> Shortcuts (iOS)
It's great that they sync accross both platforms, but it's pointless if I can't use them on properly on OS X.

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

Is there a way to simultaneously add text to Comments field for multiple files?

Is there a way to simultaneously add text to Comments field for multiple files? I know I can use Option+Comman+i to bring up the Inspector window but it doesn't have a Comments field. For example, in iTunes you can select multiple files and change metadata for any field simultaneously and easily yet when it comes to the Comments field in the Finder, this seems to be missing.
In our production environment, Comments field is important because we place notes about what drive the file originated then when it gets transferred to LTO-6 tape via LTFS, we can quickly trace it in the event we needed to recreate the hard drive. Because tape archiving is linear, we can't store all of the files on the same tape.
We've tried using Apple's Automator but it too seems to not have a way to batch change text in the Comments field. Any help is appreciated.

What is "order data"?

Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

Is there a way to copy/paste text in Photoshop without keeping formatting?

Hello,
Is there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
I found this feature very annoying.
Is there a way to turn it off?
Thanks.

You can use this simple workariound:
copy the desired text and paste it in a simple text editor app like notepad (win) or textedit (mac).
Then copy this unformatted text and paste it in photohop.

Is there a way to add images , text and button in the individual marquee of a carousel

Is there a way to add images , text and button in the individual marquee of a carousel ?

Write a custom carousel. Usually carousel components are just ULs that use something like jQuery to rotate through the LIs. The foundation carousel component is really just designed for some specific use cases. Generally I would just recommend rolling your own.

Is there a way to retrieve a text message that has been deleted from my iphone?

Is there a way to retrieve a text message that has been deleted from my iphone? I did't delete the message but after i synced my phone the message was gone.

No, the app doesn't use Safari. The app is AutoDesk Inventor Publisher Viewer. I think there is a way that you can have a publish Inventor file, and if you create a correctly formatted hyperlink, you can click on it and it will immediately open the file in the viewer.
I know that if you offer the file as a standard download, iOS will ask whether you want to open it with Inventor Pub. Viewer or save it to another app that can accept files. I would prefer to skip the prompt, and just open the viewer.
I've heard mention that this can be done with this application, but I can't find reference material anywhere.

Is there a way to use a text field as a rollover?

Similar Messages

Maybe you are looking for