Is there a way to use an insert key in xcode?

Im writing code in c++ in xcode on a macbook pro, is there any trick or way to use insert. I have some code that would be easier to change using insert. Thanks for the help.

Isn't that the only mode it runs in? Do you mean overtype perhaps? That's a DOS thing. Try using rectangular selections and/or search and replace with regular expressions.

Similar Messages

  • Is There a way of using an alt key on the iphone (to so alt characters)

    Is There a way of using an alt key on the iphone (to so alt characters)??
    Cheers all.

    There is no alt key, so no, but there are a lot of preloaded symbols already on the phone, all you have to do is hold a key and extra options will come up. For example, if you want an accent over a, hold a, and it will give you options for it. This also works with the symbols, for example, the $ symbol can be held to provide the money symbol for euros, yens, pounds, etc.

  • "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card?

    "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card? There is a hardware fault but this is confined to the internal sim card receivers and purely the parts related to the sim card there are no other hardware faults! I've tried dfu mode and a restore and cant find anything related to this anywhere on the internet, thanks for any help in advance, Bobby

    iPhones require a SIM card, that card does not need to be active.

  • Is there any way to use video with the new Flash CC HTML5 Canvas?

    I am a long time Flash user trying to determine if this new version of the program is something to add to the workflow again (after the last several years of not being able to use it) and the tutorials I have seen are not well written. Is there a way to use a video file within the animation, like with the AS2 and AS3 versions of Flash where I could insert a video clip into a symbol and animate the symbol while the video played.
    What I need to know is what format of video file I should use and how to add it into the timeline since Flash does not seem to be allowing for any type of import for this.
    Any Thoughts?
    Thanks,
    Brett

    Ok, so there are limitations, are they written down somewhere? I have been looking for a list of do and do not functions and the ways to work around them. Are they in the documentation somewhere I haven't discovered?
    Right now all I am looking to do is create Classic Tweens that animate movement and opacity so I can create a presentation with video that includes these elements. Is that level of functionality available in the HTML5 Canvas, or is that still on the drawing board?
    Is there a specific name for what I am looking to do that would aid my search? HTML5 video is not enough since the answer has not been forthcoming in Google or on Adobe or Stack Overflow. I am starting to think that nobody has thought of this yet, or if they have they decided that it is not currently possible and skipped the part where the rest of us find out.
    Any thoughts on making the connection to either doing this or finding out that it is just not possible yet would be very helpful.

  • Is there a way to use old iphones without a sim card

    is there a way to use old iphones without a sim card?

    Yes but if it needs activating first then a Sim card must be inserted just during the activation process
    and can then be removed
    http://support.apple.com/kb/ht3406

  • Is there a way to use standard Windows widgets?

    Is there a way to use standard Windows widgets inside LabView (6.1)? Check boxes, form controls, et c.?

    If you want to use ActiveX controls, you place an ActiveX container on the front panel, right click, choose Insert ActiveX Object and then browse for the object you want. There's several shipping examples like FamilyTree (MS TreeView object), and Ribbon, Simple Curve, and Torus that use ActiveX objects from NI.

  • Is there any way to use flash without all the bloated code?

    I  want to put a flash player on my site, however with dreamweaver the  "insert movie" option puts a ton code in my markup to the point where i  cant even tell what im looking at. Is there any way to use flash without  all the bloat?

    Yes and no.  Some bloat as you call it is necessary to support all browsers.  That said, this on-line tool takes your Flash code and converts it to valid XHTML Strict standards.  In the process, the code is minimized a bit.  Be sure to test in an XHTML Strict doc type page.
    http://www.validifier.com/
    Nancy O.
    Alt-Web Design & A
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Is there a way to use a statically defined appearance stream in a dynamically created annotation?

    Hello,
    I want to create a document with cascading 'popups'.  Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images.  I'm currently using widget annotations based on a pushbutton field.
    Each page in my document has many citations that refer to other pages in the document.  When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination.  However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc.  In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
    Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
    Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
    So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
    Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object.  However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
    Is there a way to use a statically defined appearance stream in a dynamically created annotation?
    Thank you,
    Dave

    Hi George, I've gotten named APs to work, and I expect hidden buttons will follow.  Thank you very much!
    Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups.  However, I don't want to store identical icons in each document on account of file size.
    Instead, I'd like to store one instance of each icon for all documents in the file.
    Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
    Thank you again,
    Dave

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • HT1541 is there a way to use my itunes credit to send a gift card? i have credit from gift cards on my account and would like to gift some of it to someone else.

    Is there a way to use my itunes credit to send a gift card to someone else. I have credit on my account and would like to gift some of it but cannot figure out how to use the credit to do so. It appears I can only send a gift by charging to my credit card.

    You cannot use gift balance for gifts.
    Sorry

  • Is there a way to use iPhoto and *not* have it import photos?

    Hi there,
    I'm transitioning from a PC to a Mac and everything is going fairly well -- overall a better user experience. One question I have is, is there a way to use iPhoto without having it import photos? My main issue is that currently iPhoto imports all the photos that I want to view/edit in iPhoto and copies them to it's own folder structure. I like to manage my pictures in a folder structure that I define, so I already back up my photos to another location and now I'm finding that iPhoto is just duplicating the pictures that I already have where I want them, sucking up precious space on my SSD.
    So is there a way for me to just point iPhoto to a folder, make my edits on those photos, and have iPhoto automatically save those changes to the original folder I pointed it to, instead of duplicating the photos in it's own folder structure?
    It occasional things like this that makes me miss some Windows features. In this case, I miss Windows Photo Gallery.

    Hm, ok so if I edit my photos (adjust brightness etc) in iPhoto and then export it, does it export with the brightness changed, or does it just export the original?
    It exports whichever you choose - the edited version or the original.
    However, am I the only one with trust issues with importing all my photos into iPhoto? I'm scared the library will get corrupted, etc.
    NO you're not the only one. The protection against any data corruption is a good back up, and you need that for any data on any computer running any OS. But in the case of iPhoto, remember too that the original files are stored exactly as they are imported, in folders, in the filing system.
    that when I go to export the photos, there's a LOT of duplicate file names that the export chokes on, which makes it very tedious, no, painful, for me to export a large number of photos.
    Explore the options under File Name when you export from iPhoto using the File -> Export command
    Regards
    TD

  • Is there a way to use PM4.0 with Windows XPH?

    Is there a way to use PM4.0 with Windows XPH without purchasing the latest suite or upgrades?  I origionally purchased a suite with Pagemaker, Photostyler and Freehand just before Aldus went Adobe, and Win3.1 went Win95, then WinME and WinXP.  I miss PM and have several manyscripts saved on PM4.0 and can not export or import them to any current wordprocessing programs.  I was very far into one manuscript and am now in a position to finish it up but don't want to have to purchase a whole suite in order to do so.  Any suggestions for this old tightwad?  [email protected] 

    Jay Chevako wrote:
    Find an old computer and run win3.1.
    Jay
    Shouldn't that be Win3.0  c.1991?  And with a very early of version ATM (Ver 2?)  if you want to do anything with fonts?
    I think I have a WinME PC in the garage, which if you can re-format with DOS 5 and install Win3 instead (I may have the disks in the garage too), PM4 will positively scream along.
    I reckon it's non starter on a modern WinXP PC, as the OS is so different, but if you're willing to experiment, you never know!
    But if you want to open some old files to extract the text, you can open the PM4 files and save them with a d/l'ed trial copy of PM7, which will be OK on WinXP
    Iechyd da! John
    23:45 27/04/2009

  • Is there a way to use two macs to run one app? I want to use my two macbook pros processors in a shared capacity.

    I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.

    Yep here you go.
    http://www.youtube.com/watch?v=vLujLtgBJC0

  • Is there a way to use iCloud Photo Library WITHOUT syncing?

    The idea I had of iCloud Photo Library was that I could upload my pictures to it and access them from all my devices WITHOUT having to sync them.
    At the end of every month, I move all the photos from my phone to my computer. It helps me save space and keep things tidy. With iCloud Library, I want to access all my photos, but it looks like I must sync them through iCloud, and then to save space in my phone, I have to select "optimise space for iPhone". Is there any way to use iCloud Photo Library as a mere cloud storage? I don't want to keep photos on my phone, neither full resolution or "optimised" ones. I want to put them on iCloud, and when I need them, then I want my phone to download them.
    I realise I could use other cloud storage providers for this, but I have always liked Apple's integration with their own services, so if possible, I would like to use iCloud Photo Library without syncing to my devices. Just keep my stuff in iCloud, and when I tap it, download it.

    www.icloud.com.
    Doesn't work well in IE8 (9 I would think is ok), but is fine in the current version of Chrome.

Maybe you are looking for

  • Mini DV to external drive to iMovie to DVD – strategy?

    I have had 4 hours of old home movies transferred from Beta to mini dv tapes, and plan to transfer them to an external firewire drive using a borrowed camcorder, then use iMovie to edit and burn them onto a one hour DVD. Can I use the copy of iMovie

  • Why does the display name in older messages change if I update my address book for that E-mail address?

    I have recently installed Thunderbird 24.5.0 after upgrading a WinXP machine to Win7. I have discovered a strange problem with older mail that was imported from Outlook Express 6. The pastor of my church uses a generic E-mail address <[email protecte

  • My 4x6 prints in Lightroom 4 only fill a quarter of the paper

    I watched Matt Kloszowki's LR killer tip on borderless printing and followed his instructions but my 4x6 print only fills about a 40% of the paper and I'm not getting the full image. I added a border to outline the edge of the =print whic I scanned.

  • Lost original boot disc for ibook, and forgot password, help

    I have an older ibook from 2003 and i lost the software that came with it for loading mac osx. I forgot the password cause i havent used it in over a year and now i am wondering if i can reset the passwords with the cd from my new powerbook i bought

  • SyncResolver.UPDATE_ROW_CONFLICT

    Hi, I am using DataProvider on each page and their cachedRowSet is normally defined in SessionBean. And same cachedRowSet from SessionBean is used in number of pages. General setting for cachedRowSet is: concurrency: CONCUR_UPDATABLE transactionIsola