Is there a way to use an off camera flash or remote flashes on a Rebel T5? (This is not a T5I)

I have a Rebel T5 I just bought a few months ago. I like it as it is a great entry into DSLR. I will be looking at upgrading in a few months. But in the meantime, I just bought a speedlight kit (not Canon) and it came with 2 speedlights and the remote trigger and 2 remote receivers. Is there a way to enable the camera to use off camera flash? i was able to put one of the flashes on as an extrenal flash but I have not been able to figure out how to enable off camera flash.
Solved!
Go to Solution.

Thank you Skirball. It did come with a trigger. I must not have had the correct settings. When I first got the set, I put the trigger on the camera and hooked the lights to the receivers and it did not work for me. I thought I needed a special setting. But I must have had the receivers set to camera instead of flash. Once I put it on today, it worked and triggered both flash units. Incase anyone else has this issue, the kit I bought from Amazon is the Altura 2 flash kit that came with 2 speedlghts, the trigger and 2 receivers. I paid $169 for it. But when I hooked them up today and had the receivers set to Flash, they both were triggered when I pressed the shutter button.
Thank you again.

Similar Messages

  • Is there a way to use my iPhone 4S as a remote to change music on my iPod touch

    Is there a way to use my iPhone 4S as a remote, to change music on my iPod touch, while it is in a docking station?

    No.

  • Is there a way to use soft brushes in Flash?

    I have the latest version of flash and I was wondering if there is a way to use a soft brush to sketch out my animations. A friend of mine suggested to draw them on photoshop or illustrator and just import them to flash. Is there a way to just skip this and directly sketch out my drawing on flash using a soft brush instead of the hard one?

    Hi!, Im not talking about loading it, what Ive noticed is that once the animation is loaded and added to the display list it doesnt perform well the firs time is rendered, and I want to know if there is a way to put that animation on cache before displaying it.
    Thanks!

  • Is there a way to use import from camera with a cannon 7d CF card so that you can select only the parts of the clips that you want?

    I used to use log and transfer and now in final cut x I know you are supposed to use import file, however you have to import the entire clip instead of being able to select an in and an out point of the footage being imported. This is not good for me because I have a limited amount of space and if I'm going to be converting everything to prores and only using 65% of the footage that is a huge waste. Any help or work arounds would be appreciated. Thanks!

    I import from P2 and 7D cards daily, it's super easy, very fast, very simple, not so complicated.
    Here's how you do it.
    1- CF card in a card reader, mount on Desktop, or copy whole card contents to a folder.  (P2 can read directly from inside cam)
    2- Open "Import From Camera" in FCP X.
    3- Click "Open Archive" button.
    4- Point to CF card.
    * FCP X will act like L&T now.
    * Select a Range of a clip you want to import, click import button.
    * Select a different Range of same clip, click import button.
    * If you want whole clips, highlight one or more whole clips, import.
    * Imports are ProRes 422 files.
    * If you want a backup of the CF or P2 card "as is", click the Create Archive button.
    Very simple, no need for thrid party BS.  It's really simple and easy.
    Canon DSLR's have never been able to mount the cards while inside the camera.  You have always needed a card reader.

  • Is there a way to use 2 seperate Id's on my ipad2

    My wife purchased a book on her Iphone4 and wants to read it on the ipad2 so it has larger font. I have my apple id on the ipad but i dont want to loose all of the stuff I already have on it. Is there a way to use 2 seperate apple Id's on one ipad2?

    Doesn't this lock the user out of their own account now or am I missing on this associated devices stuff?
    Copied from
    http://support.apple.com/kb/HT4627?viewlocale=en_US&locale=en_US
    Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also beauthorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    Message was edited by: Demo

  • Is there a way to make a website in flash, the client can edit?

    is there a way to make a website in flash, the client can edit? if not which is the best tool to use?
    thanks!

    I said "such as" for a reason.  There are various forms that data resources can take, such as simple name=value text files, but if you are shy of learning xml then you are likely shy of other file forms as well.
    Another way would be to have the client purchase Flash and then they can edit the Flash source file themselves.
    Unfortunately, to do what you want, either you or the client has to learn/understand the tools that are involved.

  • I am using a Hughes Satellite and I am having a problem with using all my bandwidth without even using my computer.  Is there a way to shut things off that I don't need running all the time in the background.

    I am using Hughes satellie for my internet provider.  I am having a problem using all my bandwidth each day.  Is there a way from using this bandwidth.  I am using even when I am not using my computer.  Is there a way to turn off things that are running in the background.

    It depends a lot on what you have installed and what apps you run. Here's a suggestion:  Get Little Snitch and see what processes are accessing your internet connection.
    charlie

  • TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

    I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

    Welcome to the Apple community.
    You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
    Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

  • Is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

    is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

    iPad Photo Recovery: How to Recover Deleted Photos
    http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
    How to Restore Lost or Deleted Files from iPad
    http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
    How to Recover Deleted Files from iPad
    http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
    How to Recover Photos from iPad
    http://www.ipubsoft.com/idevice-tips/recover-deleted-photos-on-ipad-mini.html
    iSkysoft Free iPhone Data Recovery
    http://www.iskysoft.com/iphone-data-recovery/
    Recover iPhone/iPad/iPod touch lost data, Free.
    Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
    Recover data directly from iPhone or from iTunes backup
    Preview and recover lost iOS data with original quality
    Wondershare Dr.Fone for iOS
    http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
    Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
    iPad Data Recovery Software (PC & Mac)
    http://www.anysoftwaretools.com/ipad-data-recovery.html
    Jihosoft Mobile Recovery for iOS
    http://www.fonerecovery.com/iphone-data-recovery.html
     Cheers, Tom

  • Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

    probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

    Hey there 79usma79!
    I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Is there a way to use ipod with new computer without erasing entire library

    I'm not really tech-savvy, but I'm tossing my old computer and getting a new one - is there a way to use my ipod on my new computer without erasing my existing library? It won't let me make changes to my ipod and wants me to erase everything that is on there right now - HELP!

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • HT3131 Is there a way to use 2 external monitors with the MacBook Pro in closed clamshell mode?

    My internal display on my MBP is having issues and occasionally displays white lines all over the screen. The current external monitor displays properly. Is there a way to use two extrernal monitors intead of one external + the internal display?
    ==========
    Model Name:          MacBook Pro (17-inch, Early 2009)
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.93 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          GPU
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3436
      gMux Version:          1.7.10
    NVIDIA GeForce 9600M GT:
      Chipset Model:          NVIDIA GeForce 9600M GT
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0647
      Revision ID:          0x00a1
      ROM Revision:          3436
      gMux Version:          1.7.10
      Displays:
    Color LCD:
      Display Type:          LCD
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    Cinema HD:
      Display Type:          LCD
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          *************
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported

    Hi Mike, this isn't the first such problem report I've seen, perhaps another option...
    http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Is there a way to use the preview in browser function without an Internet connection?

    This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

    Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

  • Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Yes.
    1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
    2) Go through the standard configuration suggested by the setup "wizard"
    3) Then manually turn off the wireless function using AirPort Utility

Maybe you are looking for