Is there a way to use an older downloadable driver that don't load on 6I?

I got an error loading a driver for a Transient Digitizer TRC 4020. Is it possible to convert it to 6I? I got this older Transient Digitizer for education of our students in our institut (for instr. Impact test). It came with an old XT and the software isn't running anymore. I'm using 6i and i've found this driver in the database but it will only run with an older verion of Labview

LabVIEW 6 can load and run code developed in LabVIEW 4.0 and later versions of the environment. The 4020 driver I found has a component developed in an earlier version of LabVIEW that is not compatible. If you can load it in an alternate version of LabVIEW (5.1 etc), you should be able to mass compile the vi's using this alternate environment and then load them from 6.

Similar Messages

Is there a way to use my external hard drive to run sounds from Mainstage2?

Is there a way to use my external hard drive to run sounds from Mainstage2?

TM can back up external HDs. If you have both of your external drives attached, go to the options in TM preferences. Be sure the data drive is not listed (this lists drives/folders to exclude from a backup). Then initiate a TM backup or wait for the hourly backup. That should back up the data drive.
You can only tell TM what to exclude from a backup, not what to include.

Is there a way to "force-mount" an external drive that doesn't show up on it's own when plugged in with firewire?

Hi, is there a way to "force-mount" an external drive that doesn't show up on the desktop? I have a new Hitachi SATA III 2 TB Ultrastar that won't show up like all the other drives when plugged in. So I can't partition, repair, format etc with Disk Utility, Disk Drill, Tech Tools etc. How do I make it visible?
I use the FW 400 to 800 adapter and a FW hub.
Thanks,
W.

ok, I did find the log in Diskutil of what happened, I just can't figure out why it happened and how to start over:
2014-04-20 13:42:08 -0400: Disk Utility started.
2014-04-20 13:44:30 -0400: Preparing to erase : “Terra 8”
2014-04-20 13:44:30 -0400:           Partition Scheme: GUID Partition Table
2014-04-20 13:44:30 -0400:           1 volume will be created
2014-04-20 13:44:30 -0400:                     Name                    : “Terra 8”
2014-04-20 13:44:30 -0400:                     Size                    : 2 TB
2014-04-20 13:44:30 -0400:                     File system          : Mac OS Extended (Journaled)
2014-04-20 13:44:30 -0400: Unmounting disk
2014-04-20 13:45:00 -0400: Creating the partition map
2014-04-20 13:45:01 -0400: Waiting for the disks to reappear
2014-04-20 13:45:01 -0400: Formatting disk2s2 as Mac OS Extended (Journaled) with name Terra 8
2014-04-20 13:45:26 -0400: Initialized /dev/rdisk2s2 as a 2 TB case-insensitive HFS Plus volume with a 155648k journal
2014-04-20 13:45:26 -0400: Mounting disk
2014-04-20 13:45:29 -0400: Erase complete.
2014-04-20 13:45:29 -0400:
- That was it, gone.....

Is there any way to edit my bookmark backups so they don't load something they already have?

I saved a backup of my bookmarks and when I try to load it, it only loads less than have of the original ones. I just wanted to know if the ones already loaded could be removed from the file so I could continue restoring them.

See also:
*Bookmark Deduplicator: https://addons.mozilla.org/firefox/addon/bookmark-deduplicator/
*Bookmark Duplicate Cleaner: https://addons.mozilla.org/firefox/addon/bookmark-duplicate-cleaner/

Is there a way to create a disk image so I don't have to take the disk along to play a game when I go on a trip?

I'm going to a trip soon. I play a game (Sims) that requires that the disk is in the computer in order for the game to run. Is there a way to use a disk image so I don't have to bring the actual disk along on my trip? Thanks.

Maybe. Mount the disc and launch Disk Utility. Select the disc, and choose File > New > Disk Image from Sims. In the Save dialog that opens, choose "CD/DVD Master" as the format. Save the image. Eject the Sims disc, then double-click the image file you just saved. It should mount. Try the game.
DO NOT distribute the image file to anyone else, as that would be copyright infringement.

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

No, you cannot downgrade your iOS device. That's not supported by Apple.

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Is there a way to use my HP6100 Printer with Mavericks?

Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

Is there any way to get an older app version of apple tv remote?

It's been several months since the apple tv remote app was updated to 3.0+.
Once I updated, I have not been able to control my apple tv (2nd gen).
I have 2 ipod touch (2nd gen as well) and neither can use the updated app to control our apple tv any more.
We've had to resort to using the aluminum remote (which we constantly are losing)
Long story short. Is there any way to get an older version of the app (say 2.4)? I've looked everywhere but everyone links back to itunes (and that only has the latest version). We're also stuck on iOS 4.2 because of hardware. There are a couple of sites out there but it seems that they are not legit as they ask for credit card info.
Any help is appreciated.

You can only do so if you downloaded a previous version at some point in the past, and it's still in the iTunes library on your computer. If that version is updated too, maybe the old version is in Trash/Recycling Bin.

Is there a way to use a statically defined appearance stream in a dynamically created annotation?

Hello,
I want to create a document with cascading 'popups'. Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images. I'm currently using widget annotations based on a pushbutton field.
Each page in my document has many citations that refer to other pages in the document. When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination. However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc. In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object. However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
Is there a way to use a statically defined appearance stream in a dynamically created annotation?
Thank you,
Dave

Hi George, I've gotten named APs to work, and I expect hidden buttons will follow. Thank you very much!
Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups. However, I don't want to store identical icons in each document on account of file size.
Instead, I'd like to store one instance of each icon for all documents in the file.
Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
Thank you again,
Dave

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

HT1541 is there a way to use my itunes credit to send a gift card? i have credit from gift cards on my account and would like to gift some of it to someone else.

Is there a way to use my itunes credit to send a gift card to someone else. I have credit on my account and would like to gift some of it but cannot figure out how to use the credit to do so. It appears I can only send a gift by charging to my credit card.

You cannot use gift balance for gifts.
Sorry

Is there a way to use iPhoto and *not* have it import photos?

Hi there,
I'm transitioning from a PC to a Mac and everything is going fairly well -- overall a better user experience. One question I have is, is there a way to use iPhoto without having it import photos? My main issue is that currently iPhoto imports all the photos that I want to view/edit in iPhoto and copies them to it's own folder structure. I like to manage my pictures in a folder structure that I define, so I already back up my photos to another location and now I'm finding that iPhoto is just duplicating the pictures that I already have where I want them, sucking up precious space on my SSD.
So is there a way for me to just point iPhoto to a folder, make my edits on those photos, and have iPhoto automatically save those changes to the original folder I pointed it to, instead of duplicating the photos in it's own folder structure?
It occasional things like this that makes me miss some Windows features. In this case, I miss Windows Photo Gallery.

Hm, ok so if I edit my photos (adjust brightness etc) in iPhoto and then export it, does it export with the brightness changed, or does it just export the original?
It exports whichever you choose - the edited version or the original.
However, am I the only one with trust issues with importing all my photos into iPhoto? I'm scared the library will get corrupted, etc.
NO you're not the only one. The protection against any data corruption is a good back up, and you need that for any data on any computer running any OS. But in the case of iPhoto, remember too that the original files are stored exactly as they are imported, in folders, in the filing system.
that when I go to export the photos, there's a LOT of duplicate file names that the export chokes on, which makes it very tedious, no, painful, for me to export a large number of photos.
Explore the options under File Name when you export from iPhoto using the File -> Export command
Regards
TD

Is there a way to use PM4.0 with Windows XPH?

Is there a way to use PM4.0 with Windows XPH without purchasing the latest suite or upgrades? I origionally purchased a suite with Pagemaker, Photostyler and Freehand just before Aldus went Adobe, and Win3.1 went Win95, then WinME and WinXP. I miss PM and have several manyscripts saved on PM4.0 and can not export or import them to any current wordprocessing programs. I was very far into one manuscript and am now in a position to finish it up but don't want to have to purchase a whole suite in order to do so. Any suggestions for this old tightwad? [email protected]

Jay Chevako wrote:
Find an old computer and run win3.1.
Jay
Shouldn't that be Win3.0 c.1991? And with a very early of version ATM (Ver 2?) if you want to do anything with fonts?
I think I have a WinME PC in the garage, which if you can re-format with DOS 5 and install Win3 instead (I may have the disks in the garage too), PM4 will positively scream along.
I reckon it's non starter on a modern WinXP PC, as the OS is so different, but if you're willing to experiment, you never know!
But if you want to open some old files to extract the text, you can open the PM4 files and save them with a d/l'ed trial copy of PM7, which will be OK on WinXP
Iechyd da! John
23:45 27/04/2009

Is there a way to use two macs to run one app? I want to use my two macbook pros processors in a shared capacity.

I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.

Yep here you go.
http://www.youtube.com/watch?v=vLujLtgBJC0

Is there a way to use an older downloadable driver that don't load on 6I?

Similar Messages

Maybe you are looking for