Is there a way to use different search engines on the main bar and on the small one without having to switch anything on the small one?

I want to use google when I type to search in the main bar and wikipedia on the small search bar on the right. However, they both seem to use the same search engine, depending on which one I've chosen on the small search bar. I want them to use different ones without having to click and change engines. How can I do that?

You can use a (one letter) keyword search on the location/address bar and assign a keyword via "Manage Search Engines".
You can use the Keyword Search extension to specify which search engine to use for searching via the location/address bar.
*https://addons.mozilla.org/firefox/addon/keyword-search/

Similar Messages

TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

Is There a way of using an alt key on the iphone (to so alt characters)

Is There a way of using an alt key on the iphone (to so alt characters)??
Cheers all.

There is no alt key, so no, but there are a lot of preloaded symbols already on the phone, all you have to do is hold a key and extra options will come up. For example, if you want an accent over a, hold a, and it will give you options for it. This also works with the symbols, for example, the $ symbol can be held to provide the money symbol for euros, yens, pounds, etc.

Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

Thanks for the reply however this does not help. When I check the cloud it shows that I have only 20 photos. In reality I had a lot more than that. All the photos on the cloud are those that I have taken since I was at the Apple store. When I check cloud storage usage on my phone it says that I have 5.1 GB of photos. This is a lot more than the 20 that I can see. I am not sure what the Apple employee did to my phone.
Still looking for answers. It is really too bad that I can not talk to an Apple person to get help since they messed up my phone.

HT3131 Is there a way to use 2 external monitors with the MacBook Pro in closed clamshell mode?

My internal display on my MBP is having issues and occasionally displays white lines all over the screen. The current external monitor displays properly. Is there a way to use two extrernal monitors intead of one external + the internal display?
==========
Model Name:          MacBook Pro (17-inch, Early 2009)
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3436
gMux Version:          1.7.10
NVIDIA GeForce 9600M GT:
Chipset Model:          NVIDIA GeForce 9600M GT
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0647
Revision ID:          0x00a1
ROM Revision:          3436
gMux Version:          1.7.10
Displays:
Color LCD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Cinema HD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          *************
Mirror:          Off
Online:          Yes
Rotation:          Supported

Hi Mike, this isn't the first such problem report I've seen, perhaps another option...
http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/

Is there any way to use RUN button to deploy the application and open IE...

Hi
Thank you for reading my post
i used to use Run button to compile / deploy and run (opening the browser to project context path) .
i want to know is there any way to use RUN button to deploy an application to standalone OC4J and opening browser?
I know that we can define ear or war deployment profiles and use them to deploy the application to stand alone server , but i want a single click solution.
thanks

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Is there a way to use different NIC names in 10g RAC?

For example node 1 has ipge0 for private, ipge1 for private and node 2 has Solaris default e1000g0 and e1000g1? Or do interface names have to match on all nodes? I am not referring to IPs or subnets - just NIC names.
Here is some background.
This was a 2 node 10g RAC on Solaris that has been in operation for years. Node 2 experienced a corrupt root partition (OS, nothing to do with Oracle), so OS was reinstalled. After OS reinstall I copied /var/opt/oracle/*.* from node 1, changed them to reflect node 2 info, plus CRS related files from /etc/init.d, such as init.crsd, etc. This is shared Oracle home, so Oracle continued to run on node 1 just fine.
However, after crs startup nodeapps tells me "atlts04ra.atlts04.vip:ifconfig: status: SIOCGLIFFLAGS: ipge0: no such interface". Indeed, this interface does not exist on node 2.
So, is there a way to instruct oracle to use different interface names for nodes? Or will vipca ask for matching NIC names just like disk mount names have to match?
I want to avoid reinstallation of RAC because that will disrupt oracle database that has been running on shared oracle home all along.
Thanks.

Fzheng, I am very interested in your statement "however you can change the e1000g0 to ipge0".
You mean to say there is an OS script that will downgrade ipge0 interfaces to e1000g0?
I got some more information from SysAdmins yesterday. Apparently, when OS was reinstalled on node 2 after root partition corruption, they also patched it up to Solaris 10u9 (which by default created e1000g0-type interfaces). The first node still had 10u7 with ipge0 interfaces. We, the DBAs, were not aware of the upgrade. So, nodeapps cant start saying "no such interface"on node 2.
You are probably referring to script /usr/sbin/e1000g_transition.
Here is the description:
"DESCRIPTION
This script allows you to perform an optional driver upgrade
for the Intel PRO/1000 device present on this system from the \"ipge\"
network driver to the Sun standard \"e1000g\" network driver. The
e1000g driver include features such as link aggregation as well as
superior performance in most environments. Moving forward, e1000g
will benefit from new features as they become available, bug fixes,
and performance enhancements. The disadvantage is that some
applications configuration files may require modification to use
e1000g if they reference the ipge network interface.
This script must be run in single user mode.
This script will alter network interfaces and related system
configuration files. Configuration files for 3rd party applications
will NOT be changed. After running this script, applications present
on the system may require maintenance. The system may be in an
unsecured state. The effects of this script may be reversed using
the backout (-b) option."
So, if I understand you correctly, you are proposing to run this this script with the backout (-b) option on node 2, so interface names will match.
Is this correct?
Thanks.
Vladimir Grigorian.
http://vgrigorian.com

Is there a way to use multiple canvas tags with the ToolKit for CreateJS for Flash in one HTML5 doc?

Hey everyone, I was wondering if someone could help point me in the right direction for solving this. I have created 5 short animations using Flash and when I published each ".fla " (with Toolkit for CreateJS extension) I get 5 different html5 files with their own respective javascripts. Is there a way to get all those canvas tags in one html5 file and still have it work. I'd love a hint on where to begin so I can begin researching the solution.
Thanks!
-DJ

Why do you think that one will be over written?
You can sync as many ipods/iphones/ipads as you like to one computer. Each is different and will only sync what you select.

Is there a way to have a search form for the CRM database?

I know there is a search form provided for the Web Apps. I can't seem to find how to create a search form for the CRM database. I have created a membership site, and also extended the CRM database with additional fields. I would like the users to be able to search on selected fields in the CRM database including the extended database fields. For example, I have a field called membership type in the extended database. I would like to be able to search on that in a search form. Is that possible?
Thanks

Sidney,
Your input is very helpful to put me on the track to find a workaround. As I tried using Web App approach, I get into a road block that hopefully you can help throw some light on.
This my scenerio: I created a Web App for holding the profile fields (called it Profile). I created a Page to display the Customer record (Names, usernames, email, etc, and I would also want to display the fields from the Profile Web App. I am at lost how to do that. Seems like I can only insert the web item list in that page but I actually want to display the Detall Layout instead of the List layout. To display the Detail Layout, I need to first manually choose the item before it will direct me to the Detail layout. I am trying to find a way to do this automatically based on the fact I have only one Profile web app item for each customer.
The question is whether there is a way to pull up a specific Profile web app item based on the customer's id or something that link the two together, using javascript or whatever method. Is there a tag to gives me the customer record id? If I can get that id, I could insert that id into one of the fields in the Profile Web App during creation of profile. Perhaps I can then pull up the profile item based on this id.
Thanks for all the help
Steve

Is there a way to use a shortcut value in the page's header template ?

Hello everybody,
we would like to create a page template with centralized information in the database. I tried to use the shortcuts inside the page template, but it doesn't seems it's working, or I'm not using it correctly.
The only way I was able to use it is by using javascript to instanciate some properties, But I don't like that idea because it means I must edit all the page using that script. I simply want to change the page template and the changes be applied to all the page who are using that template.
Here is what I want to do :
<img src="#WORKSPACE#image/logo.png" alt='"MY_SHORTCUT"' />
IS there a way to have a dynamic substitution variables that I could use in my html object attributes ? (I'm using APEX 3.2)
Thank you
Leinad
Edited by: leinadjan on Oct 2, 2012 8:58 AM

leinadjan wrote:
Hello everybody,
we would like to create a page template with centralized information in the database. I tried to use the shortcuts inside the page template, but it doesn't seems it's working, or I'm not using it correctly.
Shortcuts are not available for use in page templates. This is something of a pain.
The only way I was able to use it is by using javascript to instanciate some properties, But I don't like that idea because it means I must edit all the page using that script. I simply want to change the page template and the changes be applied to all the page who are using that template.
Here is what I want to do :
<img src="#WORKSPACE#image/logo.png" alt='"MY_SHORTCUT"' />
IS there a way to have a dynamic substitution variables that I could use in my html object attributes ? (I'm using APEX 3.2)The closest equivalent to shortcuts in this case is probably an application item. Set the value using an application computation or process and reference it in the page template using static substitution syntax:
<a href="http://myserver.com/htmldb/f?p=100:1:415680519803489:::::" title="&APP_ITEM."> <img src="#WORKSPACE#image/logo.png" alt="&APP_ITEM." /> </a>Not sure that it's necessarily a good idea to use the same value for link <tt>title</tt> and image <tt>alt</tt> text in this case though. What value(s) will be used?

Is there a way to use iMessage but not have the texts sync to my iPad or other devices, just stay on my iPhone?

I don't like when things from my phone sync to my iPad or iPod, so I am wondering if there is a way to keep the texts on my phone and off of everything else. I share my iPad with others and don't want to be in the middle of a conversation when all of a sudden it just appears while someone else is using the iPad. In addition, I don't want the messages to syn to the computer when I plug my phone in, as I also share the computer with others. This has kept me from using iMessage because of how iCloud works, but maybe I just don't have a good understanding of how they work and someone can clear it up for me. Thanks.

I don't even see the iMessage option on my iPad anywhere. Maybe it needs to be updated?
Does this have anything to do with iCloud or just iMessage?

Is there a way to set default search settings in the app store

I would like to filter out all the children's apps. There seem to be more apps for kids than adults and I get tired of wading through them all.

Hi GB,
Are you talking about the stationary for the inside/body of the email (which BD gave great instructions for) or are you talking about the background color/highlight for the email as it appears in your sent folder?
I use my Mac Mail to manage several different email accounts from a variety of sources. I color code them so I can tell which account the email came into/from by just looking at the screen. If this will help, I (or one of us) can help you set this up in Mail's Rules.
Let me know.
Smiles,
Jen

Is there a way to use dynamic built string in the "from" clause

Hi all, im having one problem and now, im not sure how to solve it easily at all... :) Is there someone that would be so kind and put a eye on it? ..thx
I have plsql proc, in which i have a list of table_names. For each of that table i need to run a query that will retrieve me a list of values and for each of that value i need to do something.
If i can be more specific about the problem -> each of that table is built as key_column, value_columns, day,starttime. For a key per table there are 4 records per hour - every quarter. Im truncating those quarters to full-quarter (minutes => 0->14 = 0min; 15->29 = 15min, 30->44 = 30, 45->59=45)
example
i get for one key and specific hour four records at 15:01;15:16;15:31;15:46 => i truncate em to 15:00;15:15;15:30;15:45..Sometimes there is a problem with the tool that is generating those data for me, and one quarter could be moved a little - so i get data like 15:01;15:16;15:29;15:46 => after i truncate the times i get duplicates in second quarter. It also can happen like this : 23:00; 23:14; 23:29; 23:44; 23:59 => totaly bad => cos the last one supposed to be as 0:00 next day, ..and 23:14 as 23:15...So...that was a problem - and solution -> i wanted to create plsql that will find those hours in each table i ve defined, and for each problem hour i make some fixes - update the bad time ...
..and i have problem - can i put an dynamic built table_name in the "from" clause?
example how i wanted to do that:
declare
     type t_objectName     is table of varchar2(030) index     by pls_integer;
     l_tableName              t_objectName;
begin
l_tableName(1) := 'tmphlrgl';
l_tableName(2) := 'tmprcfgl';
l_tableName(3) := 'tmprcfbs';
l_tableName(4) := 'tmpvlrgl';
for i in (select evtime from (select day,trunc_quarter(evtime) evtime,m_id from l_tableName(i) group by day,trunc_quarter(evtime),m_id having count(*)>1) order by evtime) loop
--some other conditions and the update...
end loop;
end;
/I cannot use the l_tableName(i) for FROM ...get an error...I was thinking to build it as dynamic sql and execute immediate into some kind of object that can store mutliple lines, from which i would in the FOR cycle get the data...But im not sure if this could be done in plsql...
thanks for your time and help..
d.

declare
c sys_refcursor;
begin
for i in 1..4 loop
open c for 'day,trunc_quarter(evtime) evtime,m_id
from ' || l_tableName(i) ||
'group by day,trunc_quarter(evtime),m_id having
count(*)>1) order by evtime';Just to high light SELECT is missing that all
OPEN c FOR ' SELECT day,trunc_quarter(evtime) evtime,m_id
          FROM' || l_tableName(i) ||
'GROUP BY day,trunc_quarter(evtime),m_id HAVING count(*)>1)   ORDER BY evtime';

Is there a way to use SPD workflow to enhance the alert function in a SharePoint list?

I have a request to achieve this:
the Alert function in a list only allows a user to get alert when anything changes or created, but there is no way to specify notification before a certain field date. For Example, users want to be able to choose to receive a reminder
10 days before expiry date.
The requirement:
1) A user can set a reminder if they wish - so cannot be systematic automatic reminder
2) A user can choose how many days before expiry to receive reminder
I tried workflow by adding additional columns to set the user name to receive reminder and # of days before expiry day to send reminder. But that setting can only apply to one user at time, and the user has to set one item at time, e.g. if user A sets
5 days prior for the reminder on an item. then user B changed it to 4 days, then user A's setting if overwritten.
So this is really a customization of the alert function, but wonder if it can be achieved by workflow created in SPD (or NinTex?)
Thanks in Advance for any tips!

One option i can think of is, you can set the Create and Edit access: in Advanced Setting from List setting to Create items and edit items that were created by the user, so that other users can't override the items created by other
users.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Is there any way to use video with the new Flash CC HTML5 Canvas?

I am a long time Flash user trying to determine if this new version of the program is something to add to the workflow again (after the last several years of not being able to use it) and the tutorials I have seen are not well written. Is there a way to use a video file within the animation, like with the AS2 and AS3 versions of Flash where I could insert a video clip into a symbol and animate the symbol while the video played.
What I need to know is what format of video file I should use and how to add it into the timeline since Flash does not seem to be allowing for any type of import for this.
Any Thoughts?
Thanks,
Brett

Ok, so there are limitations, are they written down somewhere? I have been looking for a list of do and do not functions and the ways to work around them. Are they in the documentation somewhere I haven't discovered?
Right now all I am looking to do is create Classic Tweens that animate movement and opacity so I can create a presentation with video that includes these elements. Is that level of functionality available in the HTML5 Canvas, or is that still on the drawing board?
Is there a specific name for what I am looking to do that would aid my search? HTML5 video is not enough since the answer has not been forthcoming in Google or on Adobe or Stack Overflow. I am starting to think that nobody has thought of this yet, or if they have they decided that it is not currently possible and skipped the part where the rest of us find out.
Any thoughts on making the connection to either doing this or finding out that it is just not possible yet would be very helpful.

Is there a way to use different search engines on the main bar and on the small one without having to switch anything on the small one?

Similar Messages

Maybe you are looking for