Is there a way to use my branding when sending a file with Adobe Send?

Is there a way to include my logo in the message with Send files?

Hi dporterphotography,
The branding feature isn't available in Send just yet, but it is planned for a future release. In the meantime, you're welcome to send your file, with branding, using Adobe SendNow. You can log in to SendNow at https://sendnow.acrobat.com/signin.html using the same Adobe ID and password that you use for Send.
Best,
Sara

Similar Messages

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

Thank you, that was perfect!
Yoni

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Is there any way to use iPhoto without it moving my files?

I tried to use iPhoto ONCE last yer when I bought my Mac Mini, and it moved all my photo files around as it pleased, is there any way to stop it fro moving my files? I like the folder/file structure I have given my pictures and I do not need to have that managed.
At the moment I am using Picasa but I would like to know if it is possible to use iPhoto without it deciding what to do with my files.
Thanks!

No
It is a SQL database and it must control its database - like any database program
as long as you think of managing files rather than managing photos it is not the program for you - once you think of managing your photos then having the poser of a database for that will be obvious - if that is not what you want then do not use it
BTW - iPhoto does not ever "move" your files - it makes a copy of each photo in its database and manages it there - your files are never touched
LN

Is there a way to use one app spread across 2 displays with Mavericks?

I use Premiere Pro CC (among other apps) and have that app set up in 2 monitors. It doesn't seem like Mavericks is going to like that so much. Is there a way to change the display back to how it used to behave?

Yes this is the fix. I was getting frustrated over this issue. I use Dreamweaver across two minitors and the palette locations were resetting back to the main monitior where the app was. This unchecking and a quick log out and back in fixes the issue. Thank you!

HT204291 Is there any way to use computer speakers when using airplay and apple tv?

I'm a teacher using an epson hdmi capable projector in my class. I'd like to play a video (youtube, TED, etc) to a large class, but as soon as I use airplay, the apple tv mirrors my iPad to the projector, and while the video is fine, the audio is horrible, as it is also mirrored to the epson projector, which has tiny, horrible speakers. Is there any way to run the audio through the iPad, where I can connect my computer speakers through the headphone jack? Alternatively, is there an adapter that can connect to the back of the epson projector (see following) that would convert audio in the projector to computer speakers? http://epson.ca/cgi-bin/ceStore/jsp/Product.do?BV_UseBVCookie=yes&sku=V11H428120 -F#2

I believe if you go to settings> sounds... you can select where you want the sound to come from. So there you can set it to the "internal speakers" and then plug in your computer speakers.

TS2972 "select share" of home share on itunes - is home share an all or nothing share? Is there a way to use parent controls to share some portions with children's iphones?

Is home share an all or nothing selection, or is there a way to "select share" with children's 5c iphones. Parent control feature to home share?
Thanks in advance!

I can't promise this works as I haven't tested this however on every iOS Device in the Settings app under General & Restrictions you have the ability to restrict a ton of options.
Here's my two cents which you could try:
On the iOS Device go to settings -> General -> Restrictions
Go to the Music section, the TV Shows section, & Movies Section and select the appropriate rating you want your kids to have access to.
After setting this up try accessing the home sharing and see if the content you want blocked still shows up on their devices.
If the content still shows up then:
On iTunes on your PC or Mac find the content you wish to block (Home Movies, Movies, TV Shows, Music, etc)
Right click on the items you want blocked and change the rating (for example to R or NC-17).
I haven't tried this myself however on paper at least I think it should work. If it does please report back and let everyone know and congrats on the new phones

Is there a way to use an ethernet cable and cinema display with the new Macbook Air

I just purchased a new MacBook Air and would like to connect to an ethernet cable and to a 30: cinema display. Is there an adapter that would allow one to do this?

Yes you need one of these it's a Thunderbolt hubs
http://www.matrox.com/docking_station/en/ds1/
Price $249
Or
http://www.belkin.com/thunderbolt/
Price $299
The Belkan is due for release immenantly and note those USB ports are version 3.
This is what Thunderbolt is all about it's an external PCie and far more than just a cable

Is there a way to open and edit my iMovie HD files with iMovie '09 and later versions?

I am getting ready to update an older iMac from Tiger to Mountain Lion. (Long overdue, I know) I have several files that I created using iMovie HD. After I update, will the new versions of iMovie be able to open and edit my iMovie HD files?

I don't think that iMovie 11 is backwards compatible with iMovie HD 6.
If you still have the install disks for iMovie Hd 6 (iLife 6) you can keep it alongside the newer version:
Happily this is easily achieved, but it has to be done backwards.
Delete iMovie 11 (just drag it to the trash). Now install iMovie 6 from the iLife 6 install disks. Update it to iMovie 6.0.3.
Now re-install iMovie 11. This automatically moves iMovie 6 into a folder it creates in your Applications folder called iMovie Previous Version.
Then reinstall iMovie 11.
iMovie 6 works great with iDVD 7.
Now you have them both, and you can have both in the Dock as well.
Alternatively you could try this method, suggested by poster Uitech:
Open a terminal and type "touch /Library/Preferences/com.apple.iLife011.plist"
(No quotes)
Install iMovieHD6 from the iLife 6 install disk.
This works with both Leopard and Snow Leopard Macs.

Is there a way to re-synch a JSF page definition file with a .jspx page?

I was making changes to my entity object, view object, and then data control on a .jspx page - through all of these changes, the page definition file had information from the old data control and gave errors. I tried 'Rebuild' and I also tried deleting the page definition file to see if it would re-generate - neither of these options worked.
thanks

No that is not possible with Muse alone. YOu can host it on Business Catalyst and upgrade the hosting plan to at least the webMarketing plan for general uploading. If it requires each user to have their own profile etc, then you will need to use BC webApps

Is there any way around the limit of 50 files in Adobe Send?

I frequently send hundreds of jpegs through SendNow. It seems there's a cap on the number of files that can be send using Adobe Send? What is the best way to send numerous files with Adobe Send?

H Rebecca,
There are a couple of other issues along with the limit of files. (1) Adobe Send seems to randomly re-arrange the photos being sent. It is very important to me that the exact file order be maintained. (2) Adobe Send does not hold or remember the email address. My client list is existing and therefore files are sent to the same recipient over and over. Adobe Send Now did remember the email addresses so this must be an easy fix. I hope you reconsider the file size restriction as well.
Screen Shot on delivered files: Definitely random re-order of files
Subject
Heritage Ln _ Proof Sheet
Files
Proof Sheet-4 (4).jpg
Proof Sheet-3 (L1uCYPe8QcCqsCnAowZc0Q).jpg
Proof Sheet-1 (HbkQxQz3SvyYIOMt0oCq-g).jpg
Proof Sheet-2 (O6OsJRN6SamKBf-KAfNFaw).jpg
I asked a patient client to trouble shoot with me and this is the result. Not good.
My Question: Final question I promise. Did they come over in the number order or did it re-order them random?
Client Response: The sequence is random; 13, 6, 24, 31, etc.

Is there a way to use two macs to run one app? I want to use my two macbook pros processors in a shared capacity.

I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.

Yep here you go.
http://www.youtube.com/watch?v=vLujLtgBJC0

Is there a way to use OS 10.6.8 Address Book v.5.0.3 with Lion

I find Lion Address Book v.6.1 information restrictive when it opens, in that it only shows the book itself. Snow Leopard shows the groups, and when "All" is selected we see a lot more addresses as well as being able to scroll to all addresses, whereas with Lion's Address Book v.6.1, one has to flip trough all the pages of the book to see all addresses.
Hence my question, is there a way to use Address Book v.5.0.3 with Lion. Or is there a way to modify Lion's Address Book v.6.1 to "look" like v.5.0.3?
jb

Hello t:
But, I cannot find a software downloader that will install the MM prefs pane for using the MM? Is >there some way to use it?
If you are speaking of using it under OS X 10.5, this is the link:
http://support.apple.com/kb/DL951
Notice OS X 10.5.8 is a prerequisite.
Barry

Is there a way to use a statically defined appearance stream in a dynamically created annotation?

Hello,
I want to create a document with cascading 'popups'. Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images. I'm currently using widget annotations based on a pushbutton field.
Each page in my document has many citations that refer to other pages in the document. When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination. However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc. In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object. However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
Is there a way to use a statically defined appearance stream in a dynamically created annotation?
Thank you,
Dave

Hi George, I've gotten named APs to work, and I expect hidden buttons will follow. Thank you very much!
Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups. However, I don't want to store identical icons in each document on account of file size.
Instead, I'd like to store one instance of each icon for all documents in the file.
Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
Thank you again,
Dave

Is there a way to use my branding when sending a file with Adobe Send?

Similar Messages

Maybe you are looking for