Is there a way to use my own PNG and/or ICO files within the TouchSmart software?

I have an IQ526 running Windows 7 x64.
Everything runs great... except the mechanical Volume Up/Down/Mute on the unit's right-hand side has stopped working... but that's not my question.
Actual Question:
Is there a way to add some of my own PNG or ICO files to use within TouchSmart.
Some programs have the ugliest default icons so I'd like to make things look a little nicer.
Any help would be greatly appreciated.
Mel C.

Hello XCroupier:
No you can not use your own pictures in Windows 7 for icons. Only as desktop background. Microsoft took a way that feature from us. If you upgrade to Windows 7 Ultimate and download XP mode the windows xp theams will work only if they are compatible to graphic card. In HP Touchsmart 3 software click on personalized and then on create a tile. Then click windows program then click on advance. Few more choices icons will display. Not knowing the icons format doesn't help us. Not only that but there isn't a way to add them into icon window. Thanks to microsoft for taken our creative ways of setting up our own destop like XP Version had. frrw

Similar Messages

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

Is there a way to use my own photos as backgrounds (Gen 6)?

Hi, I would like to know if there is a way to use a custom photo for the background on the generation 6 ipod nano.

No to bad

Is there a way to use a date field and conditionally change its LABEL?

Hi I have 2 date select lists and desire to change the label text at runtime.
If I use it for one query it would be Order Date, another it would be Start Date.
?? BillC

Vikas,
...a page template is a special case since everything is finally rendered on a page.Don't know what you mean.
references in page templates probably get evaluated first...References in page templates get replaced with their session state values when the portion of the page template containing the references is rendered, e.g., before the box, inside the box, after the box, in the footer..., and within each section each item reference is replaced "when it is encountered" with the current value of the item from session state.
There is a Before Footer computation that sets that item to the current timestamp.I see an "After Regions" computation. On your page, the form item is rendered using the current (from the previous page request) value of the item in session state. Then your compuation sets a new value. Then the remaining sections of the page template (after the regions) are rendered and you see the newly computed value in the footer section of the template.
Is there a way to pass in the current form item name to the shortcut so that I can have a generic shortcut that returns a different value for the label depending on which item it is being invoked from?Starting in XE and now in 2.2, you can use the strings #CURRENT_FORM_ELEMENT#, #CURRENT_ITEM_ID#, and #CURRENT_ITEM_NAME# in shortcuts. This makes PL/SQL Function shortcuts such as the following possible: if '#CURRENT_ITEM_NAME#' = 'P2_ENAME' then
    return ('employee name');
elsif '#CURRENT_ITEM_NAME#' = 'P2_JOB' then
    return ('job');
else
    return ('foo');
end if; Scott

Is there any way to use a External Harddrive and use it off there?

I want to know if the iPad can be done to use a portable external hard drive and put data onto there and transferred again back onto the iPad.
I want to save by not purchasing the 64gb model but just use the 16GB iPad and connect a much more storage hard drive.
Im mainly using this idea for me to transfer my photos clearing them on my SD card and back onto my external hard drive all with the help of the iPad.
+you can say im trying to make the iPad like a computer+
Message was edited by: Ben Tang online

Oh dammit lol I knew it was impossible oh well at least I've asked, Thank you for the help

Is there any way to display document page numbers and section page numbers at the same time?

Hi, I have different sections within my document starting the page numbering at 1. Besides the section page numbers I would also like to display the actual document page numbers in the header (eg. you are on page 10 of the document and page 4 of the section). Is there any way to do that? Thanks

You can maybe use the Find/Change
Command+i
See if that can work for you.
But like Steve said it is good practice to use Paragraph Style whenever you have lots of Type, I just get lazy sometimes.. lol
Thanks

Is there a way to use an ethernet cable and cinema display with the new Macbook Air

I just purchased a new MacBook Air and would like to connect to an ethernet cable and to a 30: cinema display. Is there an adapter that would allow one to do this?

Yes you need one of these it's a Thunderbolt hubs
http://www.matrox.com/docking_station/en/ds1/
Price $249
Or
http://www.belkin.com/thunderbolt/
Price $299
The Belkan is due for release immenantly and note those USB ports are version 3.
This is what Thunderbolt is all about it's an external PCie and far more than just a cable

Is there a way to use a T.V. as a monitor while searching the web?

I would appreciate any ideas as the G3 iBook I have is great but the screen is a bit small. Thank you.

Normally, the reason to hook the iBook up to a TV is to watch a DVD or streaming video on the TV, not to read text.
Doug McLaughlin says:
If you have a 600, 700, 800 or 900MHz G3 iBook with 16MB-32MB VRAM and no external reset button or a G4 iBook, you will need to use the Apple Video Adapter to get composite or s-video jacks for video out of your iBook. You will also need to buy a composite (RCA) video or s-video cable.
The audio Y cable only does audio; you need a video cable, too. It doesn't have to be an expensive s-video cable. A cable which is used for hooking up videogames to a TV works just fine.
The yellow port on the TV is the video-in port and on the adapter, the yellow port is the video-out, so plug the adapter into the iBook, plug the yellow plug on the video cable into the adapter and the yellow plug on the other end of the cable into the yellow port on your TV.
Plug the audio Y cable into the headphone jack on the iBook and the two plugs on the opposite end into the audio-in ports on your TV, the red into red and the white into white.
You likely need Video 1 on the TV, but may need to do a bit of experimenting.
If you have an earlier model iBook, check out Doug's User Tip:
http://discussions.apple.com/message.jspa?messageID=607384
Good luck.

Is there a way to use Edge as Navigation and Have the rest of the page in HTML

Hi,
I want to create a three-column CSS layout. I want the left column (navigation) to be in Edge and have the remainder (plus header & footer) in static HTML. I'm new to Edge and am hoping this is possible. I know it will take some hard work, but before I get started, I'm wondering if this is possible, or should I just code the entire page in HTML?
Thanks!
Jon

hi jon,
yes - this is totally possible. here's a site i'm getting ready to take live next week.
http://174.120.146.114/~spacemac/
left nav bar is all edge - rest of the site standard html except for the animated edge banner on the homepage
create your div placeholders and just drop the edge code in.
hope this helps!
best,
keith

HT201269 My hard drive crashed and is unrecoverable. I lost all of the tunes that I had downloaded from my music CD's. Is there a way to use my I Pod Classic to transfer all of the music into the latest version of I Tunes on my PC and then be in sync ag

Trying to find out if I can regain complete sync of my Itunes library and my Ipod Classic.

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Is there any way to make a socket connection to a java file on the net?

Is their anyway to make a socket connection to a java applet that I place on a webhost? I want to connect to a javaapplet from my vb.net program and send commands to it. Like http://www.geocities.com/Sylonious/javafile.jpx:7070
?

Is their anyway to make a socket connection to a java
applet that I place on a webhost? I want to connect to
a javaapplet from my vb.net program and send commands
to it. Like
http://www.geocities.com/Sylonious/javafile.jpx:7070
?You wouldn't have a port in the url, you would need to have the socket open in the applet code. The vb.net program would also need to be on the same server as the applet or you'll have security issues and I doubt that's possible with geocities. I don't know what you would need to communicate with a vb.net if anything, but I'm sure it's possible.

Is there a way to find out whether all of my music files have been imported to iTunes?

Is there a way to find out whether all of my music files on the computer have been imported to iTunes?
I want to consolidate my music files to tidy it all up into one place, and then delete the originals. I don't want to delete any music until I know that it's all been imported.
Thanks.

Try iTunes Folder Watch and point it all the places you store media. When you're happy everything has been imported you can consolidate.
See also this post on Duplicates which includes a link to a backup tip.
tt2

I own 3 ipods a g2 g5 and now g6 is there a way to use them all on one PC without losing anything

I own 3 ipods a g2 g5 and now g6 is there a way to use Sync them all on one PC without losing anything

iTunes will remember the settings for each device you connect using your account.

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

Hi Jaclyn2,
Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html .
Regards,
Romit Sinha

Is there a way to use iPhoto and *not* have it import photos?

Hi there,
I'm transitioning from a PC to a Mac and everything is going fairly well -- overall a better user experience. One question I have is, is there a way to use iPhoto without having it import photos? My main issue is that currently iPhoto imports all the photos that I want to view/edit in iPhoto and copies them to it's own folder structure. I like to manage my pictures in a folder structure that I define, so I already back up my photos to another location and now I'm finding that iPhoto is just duplicating the pictures that I already have where I want them, sucking up precious space on my SSD.
So is there a way for me to just point iPhoto to a folder, make my edits on those photos, and have iPhoto automatically save those changes to the original folder I pointed it to, instead of duplicating the photos in it's own folder structure?
It occasional things like this that makes me miss some Windows features. In this case, I miss Windows Photo Gallery.

Hm, ok so if I edit my photos (adjust brightness etc) in iPhoto and then export it, does it export with the brightness changed, or does it just export the original?
It exports whichever you choose - the edited version or the original.
However, am I the only one with trust issues with importing all my photos into iPhoto? I'm scared the library will get corrupted, etc.
NO you're not the only one. The protection against any data corruption is a good back up, and you need that for any data on any computer running any OS. But in the case of iPhoto, remember too that the original files are stored exactly as they are imported, in folders, in the filing system.
that when I go to export the photos, there's a LOT of duplicate file names that the export chokes on, which makes it very tedious, no, painful, for me to export a large number of photos.
Explore the options under File Name when you export from iPhoto using the File -> Export command
Regards
TD

Is there a way to use my own PNG and/or ICO files within the TouchSmart software?

Similar Messages

Maybe you are looking for