Is there a way to use the imac as a viewer for my Nikon Camera?

After I hook up my camera to the Imac, Aperture launches. Instead, I'd like to just use the Imac to view the photos that are on the SD card inside my camera. That way, I can easily delete the photos I don't want to waste hard drive space on. I could do minor cropping from inside the camera before saving the files to Aperture. And, Photostream wouldn't pick up all those photos I didin't want to save in the first place had I moved them all over to Aperture and just viewed it with the card. I want the imac to operate as a live monitor so I can view the photos on the SD card inside the camera. Any thoughts?? Just like you can using a TV that has the right inputs.

If your Nikon camera supports it, you can do what you want with Nikon's software.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Similar Messages

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

HT1338 is there a way to use an iMac as a monitor for a Mac Book?

I want to use my new 27" iMac as a monitor for my MacBook Pro. How can I do this?

It's very easy. You just need a Thunderbolt wire and then connect your MBP with your iMac. That's it.

When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

No problem.
This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

Hello eassic,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like Target Display Mode may be what you are looking for:
Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
OS X Mountain Lion: Use another Mac as a display
http://support.apple.com/kb/PH11302
Use an iMac with Thunderbolt as a display
If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
2. Make sure both Mac computers are turned on and awake.
3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
Thanks,
Matt M.

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

HT204380 Is there a way of using the same FaceTime account on multiple devices?

Is there a way of using the same FaceTime account on multiple devices?

Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!

I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect

Is there a way to use the preview in browser function without an Internet connection?

This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

TS1292 I lost itunes card is there a way to use the code on the receipt to redeem it?

Lost itunes card is there a way to use the code on the receipt to redeem it?

http://www.apple.com/feedback/iphone.html

Is there a way to elevate the IMAC to 5 inches or higher?

Is there a way to elevate the IMAC to 5 inches or higher?

There are a number of stands available. Do a web search for "IMac stand' and you'll probably turn up something that will work for you.
Regards.

HT4314 I have two children each with an itouch. Is there a way of using the same AppleID but giving them separate game centre "me" users?

I have two children each with an itouch. Is there a way of using the same AppleID but giving them separate game centre "me" users?

See:
Multiple game center accounts for...: Apple Support Communities

With the original ATV is there a way to use the usb port with external hard drive?

Is there a way to use the usb with ATV1 and external hard drive?

I have the same question and refuse to beleive that Apple would put the USB port there for a HD and not be able to use it for that purpose.

Is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

Yes except i would like it to look like the itunes album artwork screen saver does. the itunes album artwork screen saver shows a bunch of squares and when one of the boxes changes it spins and goes to the next album artwork
what you have indicated above is kind of like a slide show where it shows you one of your pictures and zooms out to show you a collage version of another one of your pictures. i would like it to be formatted similar to the way the itunes screen saver is.
if you click on itunes artwork on the same menu as shown in your last post, you will see what i am trying to achieve.

Is there a way to use the imac as a viewer for my Nikon Camera?

Similar Messages

Maybe you are looking for