Is there a way to validate jsff/jspx?

Hi Folks,
I am using Build JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192
Is there a way to validate a jsff fragment or a jspx page? I have come across a case where lets say a jsff has components with duplicate id. There is no error while deploying the project as a jar file. However when I try to open up the screen in the browser, at runtime it gives error because of the duplicate id. I want to basically catch such stuff at compile time rather than runtime.
NOTE: Jdeveloper IDE shows duplicate id as error, however no error is shown at compile time (using ojdeploy command line)
Thanks
Vishal

yes you can .
Goto the IDE Tools->Preferences->Audit->Profiles. Expand 'ADF Faces' in Rules section -> Component ID Rules -> C+heck for Duplicate IDs when ADF Faces is Present+ . Check this box.
Note the Profile at the top of this window.
Click on Audit and check Audit during Compile and select the Profile which you noted above from the drop down.
After this you will get these errors as compilation. Make sure you select only those ruels as required , otherwise you might start getting lots of errors :)

Similar Messages

OIM: Is there a way to validate/restrict challenge answers?

Hi Gurus,
Just like we have a fairly flexible password policy is there a way we can setup a policy for challenge answers such as min length, no special chars, not same as other challenge answers etc.?
Is customizing the self-reg action to put our own validation the only way to do this?
Thanks

This is just a wild idea which I have never tested but would it be possible to create an entity adapter that listens on changes to the challenge objects that does the validation? Add a web error and you might have a way to do this within the OIM framework.
Best regards
/Martin

Is there a way to validate on save and pop up an error message?

I have created a Adobe document with several form fields. Three of them include ways to pay. I want to ensure that they select a way to pay (check, invoice, at the door) before saving. Is there a way to run a validation before they save the file, to ensure one of the options is checked?

Yes and no - you can attach code to the doc.WillSave event but as the name suggests you cannot stop the file being saved, by the time that event fires the decision has been made.

? - Is there a way to validate 1 XML record at a time, using the SAX or oth

Hello!
Before running into space problems, i generated an XML file from a 'pipe delimited' file and and then processed that XML file thru a SAXParser 'validator' and the data was correctly validated, using the RELAXNG Schema patterns as the validation criteria!
But as feared, the XML file was huge! (12 billion XML recs. generated from 1 billion 'pipe' recs.) and i am now trying to find a way to process 1 'pipe' record at a time, (ie) read 1 record from the 'pipe delimited' file, convert that rec. to an XML rec. and then send that 1 XML rec. thru the SAXParser 'validator', avoiding the build of a huge temporary XML file!
After testing this approach, its looks like the SAXParser 'validator' (sp.parse) is expecting only (1) StringBufferInputStream as input,and after opening, reading and closing just (1) of the returned StringBufferInputStream objects, the validator wants to close up operations!
Where i have the "<<<<<" you can see where i'm calling the the object.method that creates the 'pipe>XML' records 'sb.createxml' and will be returning many occurances of the StringBufferInputStream object, where (1) StringBufferInputStream object represents (1) 'pipe>XML' record!
So what i'm wondering, is if there is a form of 'inputStream' class that can be loaded and processed at the same time! ie instead of requiring that the 'inputStream' object be loaded in it's entirety, before going to validation?
Or if there is another XML 'validator' that can validate 1 XML record at a time, without requiring that the entire XML file be built first?
1. ---------------------------------class: (SX2) ---------------------------------------------------------------------------------------------------------
import ............
public class SX2
public static void main(String[] args) throws Exception
MyDefaultHandler dh = new MyDefaultHandler();
SX1 sx = new SX1();
SAXParser sp = sx.getParser(args[0]);
stbuf1 sb = new stbuf1();
sp.parse(sb.createxml(args[1]),dh); <<<<<< createxml( ) see <<<<<<< below
class MyDefaultHandler extends DefaultHandler {
public int errcnt;
"SX2.java" 87 lines, 2563 characters
2. ----------------------------------class: (stbuf1) method: (createxml) ----------------------------------------------------------------------------
public stbuf1 () { }
public StringBufferInputStream createxml( String inputFile ) <<<<<< createxml(
BufferedReader textReader = null;
if ( (inputFile == null) || (inputFile.length() <= 1) )
{ throw new NullPointerException("Delimiter Input File does not exist");
String ele = new String();
try {
ele = new String();
textReader = new BufferedReader(new FileReader(inputFile));
String line = null; String SEPARATOR = "\\|"; String sToken = null;
String hdr1=("<?xml version=#1.0# encoding=#UTF-8#?>"); hdr1=hdr1.replace('#','"');
String hdr2=("<hlp_data>");
String hdr3=("</hlp_data>");
String hdr4=("<"+TABLE_NAME+">");
String hdr5=("</"+TABLE_NAME+">");
while ( (line = textReader.readLine()) != null )
String[] sa = line.split(SEPARATOR);
String elel = new String();
for (int i = 0; i < NUM_COLS; i++)
if (i>(sa.length-1)) { sToken = new String(); } else { sToken = sa; }
elel="<"+_columnNames[i]+">"+sToken+"</"+_columnNames[i]+">";
if (i==0) {
ele=ele.concat(hdr1);ele=ele.concat(hdr2);ele=ele.concat(hdr4);ele=ele.concat(elel);
else
if (i==NUM_COLS - 1) {
ele=ele.concat(elel);ele=ele.concat(hdr5);ele=ele.concat(hdr3);
else {
ele=ele.concat(elel);
textReader.close();
catch (IOException e) {
return (new StringBufferInputStream(ele));
public static void main( String args[] ) {
stbuf1 genxml_obj = new stbuf1 ();
String ptxt=new String(args[0]);
genxml_obj.createxml(ptxt); }}

Well,i think you can use the streaming API for xml processing provided by weblogic.It is pull model,not push model like SAX.with it,you can select the events you want without having to react to every event,and you can filter the events out.
Sun also provide such streaming API for xml processing,and i got an very simple introduction about it on the Chinese Sun developer site.but i couldn't find any other infomation about it elsewhere! If you have such materials,please send to my email:[email protected],and if I have it,i will be sure to post the links here.hope it helps more or less:)
@smile@

Is there a way to validate whether the entered value is in the recordset?

I only know that the spry validation field can only validate format and patterns, how can i modify it so that it performs the above function?

Maybe the following will help
http://www.coldfusionjedi.com/index.cfm/2006/8/25/Spry-Example-Check-it-user-exists

Is there a way to validate CFSELECT in CFFORM?

Hi,
I'm using CFFORM and using CF's own built in validation for all fields. The required fields are valided and if they are left blank, the javascript pop up prevents the form from getting submitted. It does not work with cfselect however. It lets the form get submitted even if nothing is selected in the cfselect. Why does does the validation skip over cfselect? Is there a solution?
Thanks!

jenn wrote:
Hi,
I'm using CFFORM and using CF's own built in validation for all fields. The required fields are valided and if they are left blank, the javascript pop up prevents the form from getting submitted. It does not work with cfselect however. It lets the form get submitted even if nothing is selected in the cfselect. Why does does the validation skip over cfselect? Is there a solution?
Yes, there is a compromise solution, of sorts. Set cfselect's size attribute to 2.

In address book, I can look for duplicates, but is there a way to validate or verify email addresses?

The question states it pretty simply. At one point, I thought Thunderbird prompted me to do this, but I can't rediscover what I did.

You can use this addon:
*[https://addons.mozilla.org/thunderbird/addon/thunderplunger/ ThunderPlunger]

Any way to validate the Mandatory field in the XML file

Hi,
Is there any way to validate the Mandatory field in the XML file. I created an xml type table xml_validate based on the schema and insert the XML files with statement.
INSERT INTO xml_validate(warehouse_id,xml_file_name,warehouse_spec)
Values (agreementid,p_filename,XMLTYPE.createXML(l_clob));
It is validating the data types, extra tags etc but not validating the missing of the manadatory tag/value.
Thanks in advance
Rizly

Hi Ants,
Yes, I was not doing the strict validation, after searching the forum i understood that was the reason. So i did this way,
begin
for x in (select myColumn from myTable where WAREHOUSE_ID=41) loop
x.myColumn .schemaValidate();
end loop;
end;
The out put is:
ORA-31154: invalid XML document
ORA-19202: Error occurred in XML processing
LSX-00011: internal error: LsxvPushCandidate array overflow
ORA-06512: at "SYS.XMLTYPE", line 345
ORA-06512: at line 3
My i know more information about this error, especially
LSX-00011: internal error: LsxvPushCandidate array overflow
Thanks in advance
Rizly

Is there a way to auto-submit numbers for a Text Entry Box and allow for commas or no commas?

During a software simulation, the user can enter either 20,000 or 20000. Both are acceptable. Is there a way to validate both as acceptable answers and auto-submit? Using version 8.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Is there any way in FDQM to validate the source records against the essbase

hi everyone
i want to know is there any way that FDQM can validate the source records against essbase. say for example i have a a ud dimension member coming from the source i want to compare this member with essbase member in the outline and pass/fail the validation. can we do this?
thanks
tm

Hi
Are you processing through the web client or as a batch process?
If you are loading manually through the web then it is standard functionality to highlight any source metadata imported that does not get mapped to a target, you then get the opportunity to correct those members at the Validate stage. If you are setting up mapping tables with specific target members then these have to be valid members in the Essbase outline (although I guess there is a risk that those members change over time and do you mappings stay in sync), it also doesn't do that validation if you upload your maps from template files (.xls / .tra / .trn) or if you have a * to * like mapping.
If you are processing in batch then if there are any members that do not have a vliad target member after import (remember mapping is applied during the import stage) then the batch fails. You can use the AutoMapCorrect feature to overcome this and map to a default 'suspense' type member if that gives you an issue.
Ultimately if you get to the load stage and the combination of members is not valid then FDM produces a load error file, this will contain all of the records exported from FDM that have failed to load to Essbase. What this doesn't easily give you is the source metadata that makes up those failed records.
Can you provide any more info as to your current process and then we might be able to provide a few more pointers.
Hope this helps
Stuart

To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?

To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?
I had two laptops stolen and the reinstall is a real pain. This also applies to reformats and changeovers to Windows 7, etcetera.

Windows 7? Then don't waste your life minutes fumbling with an Acrobat 8 - Windows 7 combination.
If you are to be using Win 7 you'll need the current release of Acrobat (XI). "X" will function but it is no longer marketed by Adobe.
Be well...

I am wondering if there is a way to validate XML file without using .......

I am wondering if there is a way to validate XML file without using the <!DOCTYPE... but pass in the location of the schema/DTD file as a parameter to a validating method?
thanks

None that I know of. The only thing close is to use the EntityResolver interface where you can modify the location of the DTD file before it's being loaded and parsed, but that requires a <!DOCTYPE ...> in the XML file.
Good luck.

Is there a way to change the LUt extension form .CUBE to .cube. on export. TX

Is there a way to change the LUt extension form .CUBE to .cube. on export with this script in photoshop For MAC:
Chris Cox wrote:
The file extensions are written by the export plugin. (which incidentally has a comment that two studios wanted all caps extensions, but I failed to write down which ones in the comments)
To change the filenames, you'd want to add something at the end of doExportLUTs() that uses the supplied path and substitutes the desired extensions, then renames the file.
Thank you
// Export Color Lookup Tables automation in JavaScript
// IN_PROGRESS - why can't ColorSync Utility open any profile with a grid of 160 or larger?
// 150 works, 160 fails -- sent samples in email to Apple on Nov 8, 2013; they are investigating
// DEFERRED - right to left filenames (Arabic) come out wrong because of appending "RGB" and file extensions
// This seems to be a bug in JavaScript's handing of strings, not sure we can solve it easily.
// It might possibly be handled by checking bidi markers in UTF8 stream and adding custom handling for appending text/extensions.
@@@BUILDINFO@@@ ExportColorLookupTables.jsx 1.0.0.0
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/ExportColorLookupTables/Menu=Color Lookup Tables...</name>
<menu>export</menu>
<enableinfo>true</enableinfo>
<eventid>9AA9D7D6-C209-494A-CC01-4E7D926DA642</eventid>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING
#target photoshop
const appUIState = app.displayDialogs;
app.displayDialogs = DialogModes.NO; // suppress all app dialogs
app.bringToFront(); // make Photoshop the frontmost app, just in case
// on localized builds we pull the $$$/Strings from a .dat file
$.localize = true;
// from Terminology.jsx
const classApplication = app.charIDToTypeID('capp');
const classProperty = app.charIDToTypeID('Prpr');
const enumTarget = app.charIDToTypeID('Trgt');
const eventGet = app.charIDToTypeID('getd');
const eventSet = app.charIDToTypeID('setd');
const kcolorSettingsStr = app.stringIDToTypeID("colorSettings");
const kDither = app.charIDToTypeID('Dthr');
const keyTo = app.charIDToTypeID('T   ');
const typeNULL = app.charIDToTypeID('null');
const typeOrdinal = app.charIDToTypeID('Ordn');
const kFloatWindowStr = app.stringIDToTypeID("floatWindow");
const typePurgeItem = app.charIDToTypeID('PrgI');
const enumClipboard = app.charIDToTypeID('Clpb');
const eventPurge = app.charIDToTypeID('Prge');
const keyExportLUT = app.charIDToTypeID( "lut " );
const keyFilePath = app.charIDToTypeID( 'fpth' );
const keyDescription = app.charIDToTypeID( 'dscr' );
const keyCopyright = app.charIDToTypeID( 'Cpyr' );
const keyDataPoints = app.charIDToTypeID( 'gPts' );
const keyWriteICC = app.charIDToTypeID( 'wICC' );
const keyWrite3DL = app.charIDToTypeID( 'w3DL' );
const keyWriteCUBE = app.charIDToTypeID( 'wCUB' );
const keyWriteCSP = app.charIDToTypeID( 'wCSP' );
const kScriptOptionsKey = "9AA9D7D6-C209-494A-CC01-4E7D926DA642"; // same as eventID above
const sGridMin = 7; // these must match the slider range defined in the dialog layout
const sGridMax = 256;
const sGridDefault = 32;
// our baseline UI configuration info
var gSaveFilePath = ""; // overwritten by document path
var gDescription = ""; // overwritten by document name
var gCopyright = ""; // "Adobe Systems Inc., All Rights Reserved";
var gGridPoints = sGridDefault;
var gDoSaveICCProfile = true;
var gDoSave3DL = true;
var gDoSaveCUBE = true;
var gDoSaveCSP = true;
gScriptResult = undefined;
// start doing the work...
main();
app.displayDialogs = appUIState; // restore original dialog state
gScriptResult; // must be the last thing - this is returned as the result of the script
function readOptionsFromDescriptor( d )
if (!d)
return;
if (d.hasKey(keyFilePath))
gSaveFilePath = d.getString( keyFilePath ); // will be overridden by UI
if (d.hasKey(keyDescription))
gDescription = d.getString( keyDescription ); // will be overridden always
if (d.hasKey(keyCopyright))
gCopyright = d.getString( keyCopyright );
if (d.hasKey(keyDataPoints))
var temp = d.getInteger( keyDataPoints );
if (temp >= sGridMin && temp <= sGridMax)
gGridPoints = temp;
if (d.hasKey(keyWriteICC))
gDoSaveICCProfile = d.getBoolean( keyWriteICC );
if (d.hasKey(keyWrite3DL))
gDoSave3DL = d.getBoolean( keyWrite3DL );
if (d.hasKey(keyWriteCUBE))
gDoSaveCUBE = d.getBoolean( keyWriteCUBE );
if (d.hasKey(keyWriteCSP))
gDoSaveCSP = d.getBoolean( keyWriteCSP );
function createDescriptorFromOptions()
var desc = new ActionDescriptor();
desc.putString( keyFilePath, gSaveFilePath ); // will be overridden by UI
desc.putString( keyDescription, gDescription ); // will always be overridden by document name
desc.putString( keyCopyright, gCopyright );
desc.putInteger( keyDataPoints, gGridPoints );
desc.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc.putBoolean( keyWrite3DL, gDoSave3DL );
desc.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc.putBoolean( keyWriteCSP, gDoSaveCSP );
return desc;
function doExportUI()
// DEFERRED - it might be nice to be able to run without UI
// Right now we can't, but someone could modify the script if they so desire
const sDescription = localize("$$$/AdobeScript/Export3DLUT/Description=Description:");
const sCopyright = localize("$$$/AdobeScript/Export3DLUT/Copyright=Copyright:");
const sQuality = localize("$$$/AdobeScript/Export3DLUT/Quality=Quality");
const sGridPoints = localize("$$$/AdobeScript/Export3DLUT/GridPoints=Grid Points:");
const sFormatsToSave = localize("$$$/AdobeScript/Export3DLUT/Formats=Formats");
const sOpenButton = localize("$$$/JavaScripts/psx/OK=OK");
const sCancelButton = localize("$$$/JavaScripts/psx/Cancel=Cancel");
const strTextInvalidType = localize("$$$/JavaScripts/Export3DLUT/InvalidType=Invalid numeric value. Default value inserted.");
const strTextInvalidNum = localize("$$$/JavaScripts/Export3DLUT/InvalidNum=A number between 7 and 256 is required. Closest value inserted.");
const strNoExportsSelected = localize("$$$/JavaScripts/Export3DLUT/NoExportTypesSelected=No export types were selected.");
const strExportPrompt = localize("$$$/JavaScripts/Export3DLUT/ExportColorLookup=Export Color Lookup");
const strUntitledLUT = localize("$$$/JavaScripts/Export3DLUT/UntitledLUTFilename=untitled.lut");
const sSaveICC = localize("$$$/AdobeScript/Export3DLUT/ICCProfile=ICC Profile");
// these are not localized, since they refer to file format extensions
const sSave3DL = "3DL";
const sSaveCUBE = "CUBE";
const sSaveCSP = "CSP";
// strings similar to JPEG quality
const sPoor = localize("$$$/AdobeScript/Export3DLUT/Poor=Poor");
const sLow = localize("$$$/AdobeScript/Export3DLUT/Low=Low");
const sMedium = localize("$$$/AdobeScript/Export3DLUT/Medium=Medium");
const sHigh = localize("$$$/AdobeScript/Export3DLUT/High=High");
const sMaximum = localize("$$$/AdobeScript/Export3DLUT/Maximum=Maximum");
const ui = // dialog resource object
"dialog { \
orientation: 'row', \
gp: Group { \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
description: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Description:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your description here>' } \
copyright: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Copyright:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your copyright here>' } \
qual: Panel { \
text: 'Quality', \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
g2: Group { \
st: StaticText { text:'Grid Points:' }, \
et: EditText { characters:4, justify:'right' } \
drp: DropDownList {alignment:'right'} \
sl: Slider { minvalue:7, maxvalue:256, value: 32 }, \
options: Panel { \
text: 'Formats', \
orientation: 'column', alignment: 'fill', alignChildren: 'left', \
ck3DL: Checkbox { text:'3DL', value:true }, \
ckCUBE: Checkbox { text:'CUBE', value:true } \
ckCSP: Checkbox { text:'CSP', value:true } \
ckICC: Checkbox { text:'ICC Profile', value:true } \
gButtons: Group { \
orientation: 'column', alignment: 'top', alignChildren: 'fill', \
okBtn: Button { text:'Ok', properties:{name:'ok'} }, \
cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
const titleStr = localize("$$$/AdobeScript/Export3DLUT/DialogTitle/ExportColorLookupTables=Export Color Lookup Tables");
var win = new Window (ui, titleStr ); // new window object with UI resource
    // THEORETICALLY match our dialog background color to the host application
    win.graphics.backgroundColor = win.graphics.newBrush (win.graphics.BrushType.THEME_COLOR, "appDialogBackground");
// poor, low, medium, high, max
var MenuQualityToGridPoints = [ 8, 16, 32, 64, 256 ];
function GridPointsToQualityMenuIndex( num )
var menu = MenuQualityToGridPoints;
var menuItems = menu.length;
if (num <= menu[0])
return 0;
if (num >= menu[ menuItems-1 ])
return (menuItems-1);
for (var i = 0; i < (menuItems-1); ++i)
if ((num >= menu[i]) && (num < menu[i+1]))
return i;
return 0; // just in case of a logic failure
// insert our localized strings
var drop = win.gp.qual.g2.drp; // for easier typing
drop.add('item', sPoor ); // 0
drop.add('item', sLow ); // 1
drop.add('item', sMedium ); // 2
drop.add('item', sHigh ); // 3
drop.add('item', sMaximum ); // 4
drop.selection = drop.items[2]; // Medium
win.gp.description.st.text = sDescription;
win.gp.copyright.st.text = sCopyright;
win.gp.qual.text = sQuality;
win.gp.qual.g2.st.text = sGridPoints;
win.gp.options.text = sFormatsToSave;
win.gp.options.ck3DL.text = sSave3DL;
win.gp.options.ckCUBE.text = sSaveCUBE;
win.gp.options.ckCSP.text = sSaveCSP;
win.gp.options.ckICC.text = sSaveICC;
win.gButtons.okBtn.text = sOpenButton;
win.gButtons.cancelBtn.text = sCancelButton;
// set starting parameters
win.gp.description.et.text = gDescription;
win.gp.copyright.et.text = gCopyright;
win.gp.options.ckICC.value = gDoSaveICCProfile;
win.gp.options.ck3DL.value = gDoSave3DL;
win.gp.options.ckCUBE.value = gDoSaveCUBE;
win.gp.options.ckCSP.value = gDoSaveCSP;
// global flag/hack to keep the UI pretty
var gGlobalPreventChanges = false;
with (win.gp.qual)
sl.value = gGridPoints;
g2.et.text = gGridPoints;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(gGridPoints) ];
// global flag is ugly, but recursive change calls are uglier
g2.et.onChange = function () { if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Number(this.text);
this.parent.parent.sl.value = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
sl.onChanging = function () {   if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Math.floor(this.value);
this.parent.g2.et.text = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
// DEFERRED - we should also set the value if the same menu item is selected again (reset)
// but the JSX toolkit doesn't support that
drop.onChange = function()
if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var theSelection = this.selection.text;
if (theSelection != null) { // only change if selection made
var theSelectionIndex = this.selection.index;
var newGridPoints = MenuQualityToGridPoints[ theSelectionIndex ];
win.gp.qual.g2.et.text = newGridPoints;
win.gp.qual.sl.value = newGridPoints;
gGlobalPreventChanges = false;
win.onShow = function ()
this.qual.sl.size.width = 128;
this.layout.layout(true);
win.gButtons.cancelBtn.onClick = function () { this.window.close(2); };
// validate inputs when the user hits OK
    var gInAlert = false;
win.gButtons.okBtn.onClick = function ()
if (gInAlert == true)
gInAlert = false;
return;
var gridText = win.gp.qual.g2.et.text;
var w = Number(gridText);
var inputErr = false;
if ( isNaN( w ) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidType );
gInAlert = false;
win.gp.qual.g2.et.text = sGridDefault;
win.gp.qual.sl.value = sGridDefault;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridDefault) ];
return false;
if ( (w < sGridMin) || (w > sGridMax) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidNum );
gInAlert = false;
if ( w < sGridMin)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMin) ];
win.gp.qual.g2.et.text = sGridMin;
win.gp.qual.sl.value = sGridMin;
return false;
if ( w > sGridMax)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMax) ];
win.gp.qual.g2.et.text = sGridMax;
win.gp.qual.sl.value = sGridMax;
return false;
if (inputErr == false)
win.close(true);
return;
win.center(); // move to center the dialog
var ret = win.show(); // dialog display
if (2 == ret)
return false; // user cancelled
// user hit OK, copy values from dialog
gDescription = win.gp.description.et.text;
gCopyright = win.gp.copyright.et.text;
gGridPoints = win.gp.qual.sl.value;
gDoSave3DL = win.gp.options.ck3DL.value;
gDoSaveCUBE = win.gp.options.ckCUBE.value;
gDoSaveCSP = win.gp.options.ckCSP.value;
gDoSaveICCProfile = win.gp.options.ckICC.value;
// if no files are going to be saved, then we have zero work to do
if ((false == gDoSaveICCProfile) && (false == gDoSave3DL) &&
(false == gDoSaveCUBE) && (false == gDoSaveCSP) )
// tell the user that no formats were selected
alert( strNoExportsSelected );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
// prompt user for directory and output base filename
// default to directory and filename of current document
var currentDocumentPath
try
// if the file has no path (not saved), then this throws
var documentPath = app.activeDocument.fullName.fsName; // Get the OS friendly file path and name
documentPath = documentPath.replace(/\....$/,''); // remove extension, if there is one
documentPath = documentPath + ".lut"; // add dummy extension
currentDocumentPath = File ( documentPath );
catch (e)
// if there was no document path, default to user's home directory
var defaultName = "~/" + strUntitledLUT;
currentDocumentPath = File(defaultName);
var fname = currentDocumentPath.saveDlg(strExportPrompt);
if (fname == null)
return false;
gSaveFilePath = fname.fsName;
return true;
function doExportLUTs( path )
const keyUsing     = charIDToTypeID( 'Usng' );
const eventExport = charIDToTypeID( 'Expr' );
var desc = new ActionDescriptor();
var desc2 = new ActionDescriptor();
desc2.putString( keyFilePath, path );
desc2.putString( keyDescription, gDescription );
desc2.putInteger( keyDataPoints, gGridPoints );
// assemble the full copyright string, if needed
var copyrightAssembled = gCopyright;
if (gCopyright != "")
var theDate = new Date();
// the year is from 1900 ????
var theYear = (theDate.getYear() + 1900).toString();
// Localization team says to just use the year
var dateString = theYear;
copyrightAssembled = localize("$$$/JavaScripts/Export3DLUT/Copyright=(C) Copyright ") + dateString + " " + gCopyright;
desc2.putString( keyCopyright, copyrightAssembled );
// select output format
desc2.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc2.putBoolean( keyWrite3DL, gDoSave3DL );
desc2.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc2.putBoolean( keyWriteCSP, gDoSaveCSP );
    desc.putObject( keyUsing, keyExportLUT, desc2 );
try
var resultDesc = executeAction( eventExport, desc, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/ExportLUTFailed=Unable to run the Export Color Lookup plugin because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function doRenderGrid( points )
// call the grid rendering plugin to do the work
    const keyRenderGrid = charIDToTypeID( "3grd" );
const keyDataPoints2 = charIDToTypeID( 'grdP' );
var args = new ActionDescriptor();
    args.putInteger( keyDataPoints2, points);
try
var result = executeAction( keyRenderGrid, args, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/RenderGridFailed=Unable to render color grid because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function resizeDocumentInPixels( width, height )
var myDocument = app.activeDocument;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
myDocument.resizeCanvas( width, height, AnchorPosition.MIDDLECENTER)
app.preferences.rulerUnits = originalRulerUnits;
function GetColorSettings()
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var result = executeAction( eventGet, desc1, DialogModes.NO );
var desc2 = result.getObjectValue( kcolorSettingsStr );
return desc2;
function GetColorConversionDitherState()
var settings = GetColorSettings();
if (settings.hasKey(kDither))
return settings.getBoolean( kDither );
else
return null;
function ConvertTo16Bit()
const eventConvertMode = charIDToTypeID( 'CnvM' );
const keyDepth = charIDToTypeID( 'Dpth' );
var modeDesc16Bit = new ActionDescriptor();
modeDesc16Bit.putInteger( keyDepth, 16 );
var result = executeAction( eventConvertMode, modeDesc16Bit, DialogModes.NO );
// state = true or false
function SetColorConversionDither( state )
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var desc2 = new ActionDescriptor();
desc2.putBoolean( kDither, state );
desc1.putObject( keyTo, kcolorSettingsStr, desc2 );
executeAction( eventSet, desc1, DialogModes.NO );
function PurgeClipboard()
var desc1 = new ActionDescriptor();
desc1.putEnumerated( typeNULL, typePurgeItem, enumClipboard );
var result = executeAction( eventPurge, desc1, DialogModes.NO );
// This helps us avoid resizing existing document views in tabbed document mode.
// This is new functionality, and will not work in older Photoshop versions.
function MoveDocumentToNewWindow()
var desc1 = new ActionDescriptor();
var result = executeAction( kFloatWindowStr, desc1, DialogModes.NO );
function main()
try
var tempDoc = null;
var tempDoc2 = null;
// do basic troubleshooting first
// make sure there is a document
if (!app.activeDocument)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document mode
var mode = app.activeDocument.mode;
if (mode != DocumentMode.RGB
&& mode != DocumentMode.LAB
&& mode != DocumentMode.CMYK)
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedColorMode=Could not export Color Lookup Tables because only RGB, LAB, and CMYK color modes are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document depth, for safety
var depth = app.activeDocument.bitsPerChannel; // an object, not a number - why? I have no idea...
var bitsPerChannel = 1;
if (depth == BitsPerChannelType.EIGHT)
bitsPerChannel = 8;
else if (depth == BitsPerChannelType.SIXTEEN)
bitsPerChannel = 16;
else if (depth == BitsPerChannelType.THIRTYTWO)
bitsPerChannel = 32;
else
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedImageDepth=Could not export Color Lookup Tables because only 8, 16, and 32 bits/channel are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// Check layer types: background plus adjustments only
// For now, don't check each layer - a multiply solid layer still works as a color adjustment, as does selective blending
// Users will get odd results from other layer types (layer masks, pixel layers, etc.)
try
app.activeDocument.backgroundLayer.visible = true;
catch (e)
if (activeDocument.layers.length == 1)
alert( localize("$$$/JavaScripts/Export3DLUT/NoAdjustmentLayers=Could not export Color Lookup Tables because this document has no adjustment layers.") );
else
alert( localize("$$$/JavaScripts/Export3DLUT/NoBackground=Could not export Color Lookup Tables because this document has no background.") );
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try
var desc = app.getCustomOptions(kScriptOptionsKey);
readOptionsFromDescriptor( desc );
catch(e)
// it's ok if we don't have any existing options, continue with defaults
// set some values from the document
gDescription = app.activeDocument.name;
// ask the user for options, bail if they cancel at any point
if ( doExportUI() == false)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// we're good to go, so save our parameters for next time
app.putCustomOptions(kScriptOptionsKey, createDescriptorFromOptions() );
// remove file extension from filePath, if there is one
gSaveFilePath = gSaveFilePath.replace(/\....$/,'');
// calculate the size of image we need
var width = gGridPoints * gGridPoints;
var height = gGridPoints;
if (mode == DocumentMode.CMYK)
height = gGridPoints*gGridPoints;
// duplicate the user document so we don't mess it up in any way
tempDoc = app.activeDocument.duplicate("temporary");
// make the temporary document active
app.activeDocument.name = tempDoc;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// convert 8 bit documents to 16 bit/channel for improved quality of merged adjustments
if (bitsPerChannel == 8)
ConvertTo16Bit();
depth = BitsPerChannelType.SIXTEEN;
// resize the temporary canvas to our target size
resizeDocumentInPixels( width, height )
// select background layer
tempDoc.activeLayer = tempDoc.backgroundLayer;
// render lookup base grid
var worked = doRenderGrid( gGridPoints );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// do not flatten here -- the export automatically gets flattened data
// and we may need layers for LAB->RGB conversion below
// export the chosen formats
worked = doExportLUTs( gSaveFilePath );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// for LAB documents to export 3DLUT (which are inherently RGB), we have to do additional work
// As a bonus, this works for CMYK as well!
if ( mode != DocumentMode.RGB )
var filePath = gSaveFilePath + "RGB";
var oldDitherState = GetColorConversionDitherState();
try
SetColorConversionDither(false);
const targetProfileName = "sRGB IEC61966-2.1";
// new document temp2 in sRGB, matching depth of original
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
tempDoc2 = app.documents.add( width, gGridPoints, 72, "temp2",
NewDocumentMode.RGB, DocumentFill.WHITE,
1.0, depth, targetProfileName );
app.preferences.rulerUnits = originalRulerUnits;
// make the new doc active
app.activeDocument.name = tempDoc2;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// insert grid
worked = doRenderGrid( gGridPoints );
if (worked == true)
tempDoc2.selection.selectAll();
tempDoc2.activeLayer = tempDoc2.backgroundLayer;
tempDoc2.selection.copy();
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
tempDoc2 = null;
// make sure temp1 is active
app.activeDocument.name = tempDoc;
// resize for RGB grid
resizeDocumentInPixels( width, gGridPoints );
tempDoc.selection.selectAll();
tempDoc.paste(true);
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
tempDoc.selection.deselect();
tempDoc.flatten();
// convert temp1 to sRGB
tempDoc.convertProfile( targetProfileName, Intent.RELATIVECOLORIMETRIC, true, false );
// export the chosen formats
worked = doExportLUTs( filePath );
// at this point we still have to clean up, even if the call failed, so fall through
else
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToConvertRGB=Unable to convert image to RGB because ");
alert( str + e + " : " + e.line );
if (tempDoc2 != null) tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// always reset the dither state
SetColorConversionDither( oldDitherState );
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
} // if not RGB
// always close temp document without saving
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToExport=Unable to export LUT because ");
alert( str + e + " : " + e.line );
// always close temp document without saving
if (tempDoc != null) tempDoc.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

Is There a Way to Pop Up a Message for a Timed Period?

Is there a way to temporarily throw up a pop up message then have it automatically cancel out on its own so the user is informed of a message without having to actually respond to it?
The idea is that I would "like" to be able to throw up a message to a user when they select and enter something into field A that they then must enter something in field B (which is dependent on a non-empty field in field A and ONLY then). It's my work around to informing the user that they have effectively made field B required after entering something in field A.
If there isn't a way to throw up a timed message like this, are there other options/ideas?
Note: Ideally, I simply wanted to be able to add a bunch of Javascript on the click event of a submit button in which I would validate all fields that need some validation of some sort (rather than have a series of pop ups occurring every time a field is clicked or changed). In other words a one time validation for all fields on one event which would then prevent the button from doing a formSubmit() if any validation failed.
If you can tell me in what type of object and what event I could do the above, that would work too. In fact, I think I'll have to do this anyway and I've tried a lot of different permutations of implementing this to no avail (i.e. a regular button, a submit button, an e-mail button on the click, change, mouseup, mouseup, etc. events). But I appear to be doing something wrong because nothing I have tried is working (it appears as if none of the JS is triggering at all based on a simple app.alert not triggering).
MJS

I guess timed message is on the wish list
However in all my forms I use following scenario to validate all data entry at one time and then submit...
I use regular button and add code in Click event
JS example.....
var errorFlag = 0;
var errorMsg = "";
if (validation expression 1) {
     //true/pass
     //no need to change following values
     errorFlag = errorFlag;
     errorMsg = errorMsg;
}else {
    //false/fail
   //set the flag and message accordingly
    errorFlag = errorFlag + 1;
    errorMsg = errorMsg + "validation message1" + "\n"; //\n for new line with in the message
if (validation expression 2) {
     //true/pass
     //no need to change following values
     errorFlag = errorFlag;
     errorMsg = errorMsg;
}else {
    //false/fail
   //set the flag and message accordingly
    errorFlag = errorFlag + 1;
    errorMsg = errorMsg + "validation message2" + "\n"; //\n for new line with in the message
//finally
if (errorFlag > 0) {
    //>0 indicates there are one or more errors
    xfa.host.message(""+errorMsg);//display all messages at one time
    exit; //now since there are validation errors you can stop processing further and exit the event
//add submit code......here....

Is there a way to open an apple store account without adding card info?

I want to have an apple store account for 2 reasons only.
1. To download the art covers for my music
2. So iTunes stops asking me every 30 seconds 'do I want an iTunes account'
At the end of registering I realised that apple are asking for my card details. I can't seem to bypass this. Is there a way to create an account without adding my card details?
If not and I have to add my card details in. Can i just check - I only pay something if i download a piece of music, movie, game etc. and there are no other charges?
thanks jason

Hi,
You have to put a credit card. It is mandatory to verify in which country you're living and for Apple to validate in which Store your can buy music if you want to do so.
But if you never buy music, your credit card won't be charge at all. Don't worry about this.
You'll also be able to download the free song of the week, which is completly free each week. And for your cover art, it will not be a charge at all too.
Hope this help.

Is there a way to validate jsff/jspx?

Similar Messages

Maybe you are looking for