Is there a way to verify if my Macbook's all right after a fall?

I bought my Macbook Pro back in 2007, and until tonight I've never done anything worse than dropping it an inch or so onto my mattress, which is hardly going to cause damage. Tonight, though...it slid off a chair and fell three feet onto hard, tiled floor, impacting along the left side of the laptop.
None of the areas are showing the insides of the computer, there are just small misalignments and a few pretty small gaps, but I really don't know enough about computers to tell if everything inside is all right, and my Applecare expired months ago. And since I'm utterly broke, I seriously can't afford to send it in and pay out of pocket, or buy a new machine.
I know the SMART status is verified, and the few functions I've tried since the fall - opening, using, switching, and closing programs, as well as adjusting volume and lighting - all seem fine. There was a minute right after, though, when Finder stopped responding and then nothing but the mouse was working. I left it alone and it swung back into action pretty quickly, but it definitely makes me nervous, I don't want to take anything for granted.
So yes. My question boils down to this - are there any programs I could install, tests I could run, or anything else I could examine, to determine whether or not the hardware is still all right?

Run the Hardware tests from the install DVD by inserting it and holding down d at a restart, that will check everything and give you a good idea of how it's doing.

Similar Messages

  • HT2729 Is there a way to store videos into a separate album right after you shoot it on iPhone camera?

    Is there a way to store videos into a separate album right after you shoot it on iPhone camera?
    Finding videos in iPhone photo album requiers you to search through everything on your album. Is there a way to create separate video album or have them automatically save to a dedicated video album?
    It's a pain finding videos when you use the camera so much and as it is I'm constantly organizing the photos.

    Not even an app that might do this?

  • Is there a way to verify SAP certification credentials?

    Hi,
    Is there a way to verify SAP certification credentials?
    I passed the test and did not receive any materials from SAP
    Trying to figure out if I can be verified by myself.
    I am not sure which forum to post this question.
    I could not find suitable forum for this. If anyone knows a better place, please advise me so.
    Since I regularly contribute to this place, I have started with this forum.
    Thanks

    I don't know how to close this unless I mark this answered. Do I miss any?
    thanks

  • Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text)  I'd like students to be able to view my comments on printed version of their papers.

    Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text)  I am a teacher, and I would  like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

    There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
    Jerry

  • When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taking with the phone in portrait mode.

    When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taken with the phone in portrait mode.

    Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?

  • Is there a way to create a "common desktop" for all RD/TS 2012 users? (Office 2010 icons on the dekstop, for example.)

    Hello!  Just like the title, is there a way to create a "common desktop" for all RD/TS 2012 users?
    I know how to do this using regular W7 workstations and 2008 Servers, but the "Default" folder under the USERS directory is gone and I'm not sure how to get the icons there in Windows 8, let alone Server 2012 Remote Desktop.
    I've installed Office 2010 on the 2012 server, but every end user that logs in has to manually type in "Word," "Excel." "PowerPoint." etc from the metro interface, then right-click each icon to add the shortcut to the desktop.
    Given the... uh.. unfamiliarity of our endusers around the computer, this really isn't the best option.  What I'd like is them to log on and have all the Office icons ready and availible for them.
    Any ideas?
    Matthew J. Fazio

    Hi,
    You can edit the local GPP and create a desktop shortcut for all users.
    Reference:
    Customize the default local user profile in windows Server 2012
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/3f178a0e-128e-4f4f-870a-90c8bbf1afeb/customize-the-default-local-user-profile-in-windows-server-2012?forum=winserver8gen
    Also, you can use CopyProfile to customize the Default User Profile.
    Customize the Default User Profile by Using CopyProfile
    http://technet.microsoft.com/en-us/library/hh825135.aspx
    Best Regards.
    Jeremy Wu
    TechNet Community Support

  • Is there a way to hide the reading pane in iPad mail after a message is read?

    Is there a way to hide the reading pane in iPad mail after a message is read?

    Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.

    I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
    The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    As Niel pointed out, yes.  The disk probably will look like the MBP disk (4) in this screenshot;
    OT

  • Is there any way to have a COMPLETE list of all samples and loops ( Logic 8

    I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
    I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
    Thanks in advance!

    Chris, I certainly don't mind additional questions and postings.
    I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
    Issues like that need to be resolved over the phone with the company, period!
    One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
    Message was edited by: Moderator

  • I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

    I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

    Please please help me, if you know how.

  • Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?

    Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?
    I really don't want to recreate the slides from scratch again.

    What about File, Export, Text Captions...? You'll have a Word document with two columns. Translate the second column (much easier in Word) and import again. That is the normal work flow for translation. Same is possible with XML instead of Word.

  • I have deleted all my bookmarks from firefox sync by error on reintalling operating system. Is there any way to recover it? I have all bookmarks saved on "Firefox Home" on my iPod. Can I extract bookmarks from "Firefox Home" to my computer? Thanks

    I have deleted all my bookmarks from firefox sync by error on reintalling operating system. Is there any way to recover it? I have all bookmarks saved on "Firefox Home" on my iPod. Can I extract bookmarks from "Firefox Home" to my computer? Thanks

    Restore your backup.

  • Is there a way to delete everything on the cloud all at once and start over?

    We tried to store a lot of photos to the cloud in one copy. The files have been syncing for over 24 hours. We tried to stop the sync and just throw everything away, and they still show up in the archive. Is there a way to delete everything on the cloud all at once and start over?

    Dulls for information on how to permanently delete your files please see Creative Cloud Help | Manage and Sync files.

Maybe you are looking for

  • EXS 24 Logical end-of-file reached during read operation Result code = -39

    EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try a

  • Apple Tv Mirror from iPad

    We are planing to go on a cruise very soon, and done some reading, but not 100% one 1 thing. If i load up my ipad 3 (the wifes got ipad 2) then connect up the Apple Tv via hdmi cable, would i be able to mirror whats on our ipads on the TV? The room w

  • HP HD 4310 Webcam Sensor

    Hi, I was wondering if anyone could tell me the sensor dimensions for the   HP HD 4310 Webcam they are not quoted in the specifications. If you also know the exact pixel pitch that would be even more helpful. Thanks 

  • Regarding the RFC Function Module call from PI

    Hi All, I am working on one File to RFC interface, in which File adapter picks the file, this file data has to goto  2 function modules in SAP system. For this i added 2 Inbound interfaces in INTERFACE DETERMINATION and I developed 2 RECEIVER AGREEME

  • ADF Swing Search form based on readonly VO

    Hello, Does somebody know how to use the JUNavigationBar search form, when it is binded to ViewObject, that is readonly? The problem is that the form begins readonly too... Thanks, Jordan