Is there a way to verify SAP certification credentials?

Hi,
Is there a way to verify SAP certification credentials?
I passed the test and did not receive any materials from SAP
Trying to figure out if I can be verified by myself.
I am not sure which forum to post this question.
I could not find suitable forum for this. If anyone knows a better place, please advise me so.
Since I regularly contribute to this place, I have started with this forum.
Thanks

I don't know how to close this unless I mark this answered. Do I miss any?
thanks

Similar Messages

Is there a way to verify the contents of my Vault?

I have recently attempted to move my vault to another drive and the process stopped part way through, the receiving drive ( Verbatim Firewire 500 Gig.) stopped and I got the "a drive has been improperly disconnected" type error message and the following pop-up:
and this when I tried to eject the source drive (WD My Book 500 Gig.)
I was able to eject it after a relaunch of Finder and a restart of my iMac I did a disk repair to both the WD drive and the Verbatim drive. The latter had some errors in "Volume" information which were repaired by disk utility and I tried to move the Vault again with the same result again so I wonder whether the Vault file is corrupted and need to know if there is a way to verify the integrity of the files contained in it.

Hi Kieran,
You can read and set the tool tips using the .assist.toolTip property:
this.assist.toolTip = "This is a tooltip...";
Hope that helps,
Niall

Is there any way to verify or repair an MP3 File?

I've got a Rio Cali MP3 Player. I occasionally have problems with MP3's -- they won't play. I may upload 140 tracks to the Rio's memory card, and out of the 140, 3 or 4 tracks won't play. They play fine in iTunes and there doesn't seem to be anything wrong with them, however they won't play on the Rio, even if I reload them.
This makes me suspect that there is something wrong with the MP3 file, however I can't figure out what's wrong or how to verify the file.
Is there some way I can check and repair a damaged MP3 file -- perhaps a mac or unix utility?

MP3Trimmer will give you a report of what problems it
encountered. You will have to scroll through a long
list of the frames though. Unfortunately as you have
pointed out it does not batch process files,
something i have long asked him to implement, amongst
other things.
The report may identify that there were problems
which at least tells you were you stand.
Thanks. I'll take a closer look at MP3Trimmer and see if I can figure out exactly what's happening with the error files.
Definitely try changing your format for those
particular problem files and see if that fixes
things.
The other thing is to examine your original CD for
defects if the problems reappear at the same point. I
have found that CD drives with diferent lasers can
give different results. When my slower dual layer
DVD/CD drive in my iMac G5 fails me I will often
successfully use my high speed external CD burner.
Also give the CD a careful wipe with an optical
(glasses) cloth it may just be a smudge or grime on
the surface.
I have had problems with CDs. I typically copy all the AIFF's to my HD first, and have had some files not copy. I usually try cleaning the disk or use a different CD reader for those files. I usually manage to get all the AIFFs onto my HD, where I run an Applescript that renames the files. I then import them into iTunes where i rip them and add ID3 tags. They rip and play fine i iTunes.
I noted your settings. I do a heck of a lot of what
you are talking about and have a How to make
Audiobooks "manual" floating around the net.
I'll do some trolling and see if I can find it.
I suggest you forget the VBR, it makes little
difference to a 32kbs MP3 ripped from a good quality
source but as I have noted seems less reliable.
Sounds like a good suggestion. I haven't done any size comparisons with and without VBR, but I suspect it's pretty negligible.
Also I suggest you join the tracks into one file per CD,
usually 30-60mins long and much less cumbersome than
hundreds of meaninglessly divided tracks.
That alone may ride over your problem.
That might get pretty labor-intensive especially for a 10 or 15 disk set. Plus, the Rio chokes on big files -- I think it's more than the ram can handle. I've downloaded a few books from iTunes and have had to cut them up into smaller segments. I've also found it easier to bookmark smaller files than to try to scroll thru a 30 min track to find the spot where you left off.

Is there a way to verify a database write?

I am writing to a access database but get inconsitent writes.
Sometimes it is written, sometime not without any way of me knowing when this will happen.
I am able to double check the write afterwards with Access but I woul like to programatically confirm that I have written to the database.
The Setup: access 2007 connected via ODBC over a local network.
attached is a simple vi to insert text data to a table in the database "testDataBase"
Solved!
Go to Solution.
Attachments:
testDataTxt.vi ‏31 KB

I will use my current situation as an example.
I am writing data to tables in a database for testing of a piece of instrumentation. This data will later be used for statistical analysis on the quality of the instruments and verification of design stability.
Issuing an insert command does not guarantee and actual write to the database in my situation. Thus I must verify that it is written correctly. The database Connectivity toolset should be reporting errors yet it is not.
This causes uncertainty in the data collected as there are missing pieces of data.
I have for testing purposes implemented the 2nd option, to try to find the unique keys I have issued to the database. If they exist that is proof that data has been written.
The unique keys come from linked tables.
I would like to attempt to implement the first option from Mikeporter. But it will take more time to test and I have been tasked with other duties. Hopefully in a week I have completed my testing and can implement it.

Is there a way to verify if my Macbook's all right after a fall?

I bought my Macbook Pro back in 2007, and until tonight I've never done anything worse than dropping it an inch or so onto my mattress, which is hardly going to cause damage. Tonight, though...it slid off a chair and fell three feet onto hard, tiled floor, impacting along the left side of the laptop.
None of the areas are showing the insides of the computer, there are just small misalignments and a few pretty small gaps, but I really don't know enough about computers to tell if everything inside is all right, and my Applecare expired months ago. And since I'm utterly broke, I seriously can't afford to send it in and pay out of pocket, or buy a new machine.
I know the SMART status is verified, and the few functions I've tried since the fall - opening, using, switching, and closing programs, as well as adjusting volume and lighting - all seem fine. There was a minute right after, though, when Finder stopped responding and then nothing but the mouse was working. I left it alone and it swung back into action pretty quickly, but it definitely makes me nervous, I don't want to take anything for granted.
So yes. My question boils down to this - are there any programs I could install, tests I could run, or anything else I could examine, to determine whether or not the hardware is still all right?

Run the Hardware tests from the install DVD by inserting it and holding down d at a restart, that will check everything and give you a good idea of how it's doing.

Is there any way to Integrate Sap b1 with microsoft project

Hi,
I would like to do add-on Project Management.
Before that I would like to get some idea from you experts
Is there anyway to integrate SAP B1 with Microsoft Project.
I appreciate your help, and desperately need your help.
Thanks in advance
Regards
Parthiban

Hi,
It all depends of what you want to accomplish, but both MS Project and SAP B1 have SDK's so yes, it's possible to integrate both the applications.
MS Project SDK Documentation
Regards,
Vítor

Is there a way to Configure SAP Netweaver 7.02 SP12 to display properly at least on firefox 14?

Good day, in our company we already have implemented a SAP Netweaver 7.02 SP12 but when we log into our server (Enterprise Portal) with Firefox 17.0.1 all the components are rendered badly. For example the detail navigation have been displaced to the right.
We think that could be a configuration problem. According to SAP PAM matrix, Firefox's rapid release cycle it's been supported since SP06, so we want to know what to do in order to display correctly the Enterprise Portal? is there any plugin to solve this problem?

Hey Rafael, sorry to hear about these weird issues.
Do you think you could take a screenshot of the issues you are seeing with Enterprise Portal? If you are worried about any workplace information being seen, you can edit the screenshot by coloring over the areas you think we should not see. Since we can't login to your company portal to see the issues.
You can attach the screenshot using the Add images section below the reply box.

Is there a way to verify the authenticity of OS X Installation media?

Hi,
I have been having problems with a computer being compromised and after so many re-installs, I am beginning to suspect the installation media itself. Does anyone have or know of an md5 checksum or any other hash for the disks? Is there any other method that can be used to verify their authenticy? I have:
Mac mini
Mac OS X Install Disk 1
Mac OS X version 10.4.7
AHT version 3A102
Disc version 1.1
2Z691-5887-A
Mac OS X Install Disk 2
Disc version 1.0
ZZ691-5860-A
Thanks in advance for any and all replies.

Hi! The installation process normally check the media for verification. Your continued installation problems may point to another problem. Often bad ram can write bad data to a drive or the drive itself can be the problem. The cases of a bad install dvd are rare. I'd pull ram except for the original stick, then I'd zero the hard drive and try again. Otherwise the most likely suspect is a bad logic board. Have you run the hardware test disc? Tom

Is there a way to verify that the dvd drive is acting up?

I think my dvd drive is on the fritz, but I'd like to somehow verify that before I take it into an apple store (it's still under apple care).
Not too long ago I noticed that when I ripped cds with the drive, then there would be some cracks and pops during the quiet parts of the resulting mp3s. (well, at least it was more noticeable during the quiet parts.) I would not encounter this problem when I then ripped the same cds with an external drive.
dvds play fine, but when I attempt to burn dvds (using Toast), I often get a "bad sector" error during the verification step. And then when I try to watch the dvd it will play for a little bit but then pause (although I can sometimes jump ahead and have it play fine).
The drive is the UJ-845E one.
Is there diagnostic thing that I can run that will say "hey dude, your dvd drive has this problem: ..."?
Message was edited by: lee p.

You will find that more often than not the problem is simply the use of Bad Cheap Incompatible Media.
There are 2 handfulls of media manufactures out there and of them only 2 or 3 are what I consider Excellent. The rest are JUNK.
http://www.digitalfaq.com/media/dvdmedia.htm
If your Optical Media will play CD's and DVD's Commercial Music, and Commercial Movies.
And will burn then 9 times out of 10 the problem like you describe is from Bad Media you are using.
I find that using Maxell 16X DVD-R media that comes in the individual jewel cases are outstanding.
Reason this media 1st is DVD-R and is recognizable by 93 to 94% of all players and computers.
2nd it is rated as one of those of highest quality.
3rd This media will burn at 1X, 2X, 4X, 8X, 16X, meaning you don't have to look for older media that matches your or other slower Burners. It will simply work.
Next with the technology always changing be sure you have Toast 7 or higher to avoid problems, I personally prefer Popcorn.
There is a lot to learn and many tricks to learn as well to avoid problems with your burn.
You have just learned the most important.

Is there any way to verify that your installed plugins are up to date without using the Plugincheck page via Tools/AddOns/Plugins/Find Updates ?

I installed Firefox 3.6.13 on a new computer and updated the plugins via the Plugincheck page. Now when I visit the Plugincheck page, it says "No plugins detected" although several plugins are installed as indicated in the Addons dialog box and About:Plugins page. The Plugincheck page used to show all the installed plugins and flag them as either up to date, out of date, or unable to detect the version.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there a way to look SAP Directories in Java Stack?

Hi Guys,
I dont want to get into PI abap stack while using AL11 for the directories. I wanted to see those directories through Java stack.
Eg: nwa. If so, what is the path.
br
Swarnalu.

You can view directories like file access using administration link -> Directory --> General Information -> File Access. IMO, using NWA, there is no such option as that of abap stack A11 to access various file directories of SAP.

Is there a way to verify if a projector lamp is truly in need of replacement?

We have an Acer H5370BD that is approximately two years old. It has seen very little use and, in fact, has been in its original box on a shelf for the last 8 months. Recently, we plugged the projector in and the lamp will not turn on. The standby light turns on when we plug it in, and the standby light turns blue when we press the power button. The unit is then silent for a few seconds, then beeps and the fan kicks on. At no point does the lamp light up, even a little. This cycle of silence, beeping, and fan blowing happens about 4-6 times before the "Lamp" light on top of the unit begins to flash. Presumably, this means the lamp needs replacement, but as previously stated, it should be nowhere near the end of its life. Before shelling out $200+ for a new lamp, are there any visual indications on the current lamp I should be looking for that would suggest it indeed needs replacement (perhaps yellowing or black marks on the bulb, etc.)? I pulled the lamp out of the projector and it looks pristine, as far as I can tell.

Hi, Look in your Manuals Appendix it will have a troubleshooting guide you can read.. it will show you on Page 45 the LED & Alarm Definition list.. ie, If the Lamp LED Is flashinf red quick flashing that indicates a color wheel issue.. If it is just red that indicates the lamp.. Check your Manual for the others..

Is there a way to verify if JAVA stack is running w/o a browser

I wonder if it is possible to tell whether a java stack is running OR not from ECC GUI.
In other words, do not use a browser, do not use a URL, do not use OS level, how to
tell from a t-code only.
Thanks!

Use TCODE SMICM
Goto --> HTTP Server --> Display data
Check value of J2EE Server operational = True(If J2EE Running) or False(If J2ee not running)
Also, in logs of SMICM you can see entry indicating status of J2EE engine = 1 (When Started)
= 0 (When Shutdown)
Hope this helps.
- Nirav.

HT3964 Is there any way to verify that you have reset your SMC?

I am having issues with the kernel_task process utilizing high amounts of cpu >150% and memory >240mb whenever I utilize data streaming of any king via the web as well as when I try to connect via VPN. Sometimes it stays high until I exit the browser. I tried the reset process for the SMC but do not know if I did it successfully. I would like any/all info regarding optimization of the kernel_task process to bring the CPU/Mem usage down. I have a Macair 1 on Mountain Lion.

You've said something that is not possible:
The original MacBook Air cannot run Mountain Lion!
See http://support.apple.com/kb/HT5444

Is there a way to test a modem?

I have an iMac g4 (with the swivel screen). I have been unable to connect to the internet server lately. The modem dials and starts handshaking and then hangs up before ever reaching the password authentication stage.
Is there a way to verify the modem's capability to connect?
Thanks
Jeff

You may do better to ask in the iMac g4 forum
Do you have a hardware test CD? might be an idea to try that aswell.
--Spire

Is there a way to verify SAP certification credentials?

Similar Messages

Maybe you are looking for