Is there a way unlock keys on wireless keyboard?

I paired my wireless keyboard to my ipad and it worked for a week without issue. Now two weeks later only the function keys are enabled. Everything below the function keys does not work. I wondering if anyone else has run into this problem and found a solution.

Well my problem got solve by rebooting my iPAD.

Similar Messages

  • Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
    It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
    If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
    For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
    In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
    Please check out the following AirPort User Tip for details on optimal base station placement.

  • Is there a way to record sounds from keyboard as they are?

    So I have a musical keyboard that I've attached to my macbook to record in Garageband. I have a ton of sounds on my keyboard from percussion, brass, piano, etc.
    When I record, for example, a trumpet sound from my keyboard into Garageband, Garageband just records the notes using its one version of trumpet or piano or whatever.
    How do I get GarageBand to just record the sound as is?
    I tried the "real instrument" track option but that ends up record all sound from the microphone on the MacBook and not recording the sound through the MIDI connection.

    goneil wrote:
    Is there a way to record sounds from keyboard as they are?
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HT1665 Is there a way to connect a wired keyboard to Ipad2?  Via USB connector/adapter?

    Is there a way to connect a wired keyboard to Ipad2?  Via USB adapter?

    Actually there have been reports of certain USB keyboards working through the USB adapters like the Apple Camera Connection Kit .  But they are far from consistent.  The best bet is to find a simple keyboard without any bells or whistles as you want one that consumes the least amount of power.
    But yes there some that do work through there.
    http://gizmodo.com/5524038/ipad-camera-connection-kit-provides-limited-usb-keybo ard-headset-support

  • Is there a way to 'number lock', the keyboard

    When entering numerical characters, if you use the spacebar, the keyboard reverts back to the letter character set. Is there a way to number lock the keyboard to stop this happening?
    If not, it may be a consideration for a future update.

    Is there a way to number lock the keyboard to stop this happening?
    No
    it may be a consideration for a future update.
    http://www.apple.com/feedback

  • Is there any way to get function keys on wireless keyboard to function like they do on a PC for the iPad?

    I need function keys for the warehousing system I run for work.
    I am logged on via VPN and Pocketcloud app in a "PC like" desktop.
    The program is E-term by Eclipse.
    Hoping to be able to use wireless keyboard to do this.
    No luck so far.

    jpaul wrote:
    Hi Jim,
    Thanks for the post. I researched on your issue using different combinations of VI, pane, and path control event and was unsuccessful in getting an event to fire when the drag starts outside of the LabVIEW window. I think you are on the right path with using a Windows API, which then could be interfaced into LabVIEW using ActiveX or .NET containers. If you are able to detect it, then you can use a user event to fire a drag start in LabVIEW. This should then allow you to successfully fire a drag over event. The NI Developer Zone article below will get you started on creating and using user events:
    Using Dynamic Event Registration to Watch for User Inaction With a Control
    Hope this helps to get you started on the right path. Have a good evening!
    Cheers,
    Jonah
    Applications Engineer
    National Instruments
    Hi Jonah,
    Thanks for your efforts in confirming my results.  I'd prefer not to use any activex or .net containers, since this will make the code extremely coupled to a specific platform.  If I can find a way to do this, using window handles or something, via WinAPI that would be preferable, because I could use a conditional disable structure to comment out the code on non-windows machines.
    If anyone has any ideas about how to receive these events, using window handles and messaging, that would be great.
    Thanks,
    -Jim

  • Is there a way to use both wireless and ethernet without having to unplug the ethernet

    I have 7280 all in one, 2 wireless laptops and 2 wired desk tops.  At present I have to unplug the ethernet cable any time I want to use the wireless.  Is there a way to set up the printer so it will recognize both. any help will be greatly appreciated

    No.
    Connecting the Ethernet will disable the wireless by design.
    Each of these connection methods look like two different devices to the network (with different MAC addresses and potentially different IP addresses).  Since there is just one printer, having what looks like two different devices on the network at once would lead to mass confusion for devices trying to access the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Is there a way to limit a wireless client's bandwidth?

    My roommate's boyfriend brings his laptop over from time to time which isn't a problem, but today something on it is killing my Internet speed. It's just crawling. They haven't been here all day, and I don't want to go mess with his computer. The airport network is all my equipment though. Is there any way to cap the laptop's bandwidth or slow it down in some way? I don't want to use MAC address filtering and ban it from the network, but I would think there's something I can do....
    Thanks,
    Sean

    No this is not a feature supported by the AirPort Extreme base station (AEBS).

  • Forward and Back Delete Keys on Wireless Keyboard (short)?

    Hello, All:
    My new Apple wireless keyboard (short version) has only the delete key on it. Is there a way to program the additional delete key, allowing me to delete in the right-hand direction? The current delete key deletes only the in the left-hand direction.
    Thank you,
    Dean

    I've just been setting up a new Wireless Keyboard for a client using a MacBook with Tiger - on which the Fn+Delete combination works - and have found that it doesn't work on her Wireless Keyboard like everyone says it should! It just gives an error beep. Help!

  • Plus and minus keys on wireless keyboard?

    hi there everyone. i've got a new aluminum wireless keyboard and i love it to bits. gorgeous bit of design and elegance. on the previous apple keyboard however there was a couple of handy keys next to the numeric pad for 'plus' and 'minus'. Does anyone know how i can find these on the wireless keyboard? these were particularly handy when hit with the 'command' key to increase or decrease the size of text in safari.

    excellent, thank you, i'd obviously not looked at my keyboard closely enough! cheers...

  • Is there a way to use Frame 8 keyboard shortcuts in 9?

    I understand that there is a new UI, but my coworker wants to remain on Frame 8 if he can't use the shortcuts he's been using for 15 years (muscle memory lasts a long time). Is there any way (a preference maybe) to use the F8 shortcuts? I saw a trick for scrolling through paragraph styles starting with the same letter using the down arrow. (Hello Adobe? It is not reasonable to suggest having headings names start with a unique letter. There are huge and current books that have all their tags already. And there are only but so many letters.) If there is no way to use F8, is there a table somewhere of what to do now?
    Thanks so much.
    jen

    quabbinjen wrote:
    So here are a few specific problems:
    1. Ctrl 8 and 9 make you use the down arrow key to cycle through letters. How would I change the ini file so that I could just keep hitting the letter?
    2. When I start typing something and then realize I've hit the wrong letter, it seems I need to backspace to the begining to correct it. I used to be able to just start up with the correct letter.
    3. Sometimes I hit Ctrl 9 and I do not get the small box where the style names display, I only see the arrow that I then need to mouse over to and click to list the styles. Why is that?
    4. If I accidently hit Ctrl 8 when I wanted 9 (for example), I have to hit escape and then start again. Previously, hitting the correct sequence twice would get me where I wanted.
    That's all I can think of now...I appreciate the assistance...jen
    The operation of the menu that opens with Ctrl+8 and similar commands has changed in recent releases. It's not clear if it's due to a bug or a design intention. You can ask for a bug fix or feature enhancement at Adobe - Feature Request/Bug Report Form.
    Search FrameMaker help for Keyboard Shortcuts for lists of useful shortcuts. Even if you open a menu with a different shortcut - say Escape q p, or Escape q c (quick paragraph or character format list) instead of Ctrl+8 or 9, the menu still misbehaves.
    I haven't tried typing a different shortcut with the Escape-key method, while in a "wrong" one, to see if that works as you remember the Ctrl+ method, but it's more keystrokes than typing Escape.
    It's not customizable in maker.ini.
    There are third-party keystroke recorder utilities that may be useful. For example, you could invoke a shortcut that opens a Ctrl+ or Escape-key menu, then types the specific command you want (without mis-typing) and executes it. Search for keystroke macro recorders on Google.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • One or more keys on wireless keyboard not working

    One or more keys on my imac wireless keyboard are not fucntioning. These keys incldue all number keyes, few symbols, and hardly any letter keys. I've been experiencing this problem for quite sometime and was wondering if there is a fix. This is twenty one and half inch imac that has a core three processor.

    I found the problem.
    'Mouse Keys'  was enabled.  On my computer System Preference>View>Accessibility>Mouse & Trackpad.
    Took me 21/2 hrs to figure this out.  Should be easier to find these solutions.

  • Sticky keys on wireless keyboard

    almost every time using the keyboard on my Touchsmart 610-1188hk, it will suddenly insert several characters even though I only pressed that particular key once. Is there any way to stop this as it is a nuisance when I am writing letters or emails.
    This question was solved.
    View Solution.

    Hi,
    Use the following steps to resolve the issue:
    Pressing a key once types several characters
    Solution 1: adjust the key repeat delay
    If two or more characters appear when pressing a key, use the following steps to adjust the key repeat delay:
    Click Start , and type keyboard in the Search box. Then click Keyboard under Control Panel.
    Figure 2: Opening the keyboard properties
    The Keyboard Properties page opens.
    Set the Repeat delay slider to Long . Click Apply , and then click OK .
    Figure 3: Changing the Character repeat setting
    If this problem continues, reinstall and update the keyboard software.
     Solution 2:Replace the batteries
    Remove the battery access cover on the underside of the keyboard and replace the batteries.
    Solution 3:Restore the original keyboard drivers
    Use Recovery Manager
    Click Start , click All Programs , and then click Recovery Manager .
    If a User Account Control window displays, click Continue .
    The Recovery Manager window displays.
    Click Hardware Driver Reinstallation .
    Figure 21: Welcome to Recovery Manager window
    On the Welcome to Hardware Driver Reinstallation page, click Next.
    Figure 22: Reinstalling the hardware drivers
    In the list of factory-installed drivers, click the Keyboard driver to select it. Then click Next .
    Figure 23: Selecting a driver to reinstall
    When the driver is finished installing, the Reinstallation is complete screen displays.
    Click Finish to restart the computer.
    ****************Please click "Accept as Solution" if your problem is solved.  ***************
     Although I am an HP employee, I am speaking for myself and not for HP.
    Hema

  • Arrow keys on wireless keyboard

    I just purchased an HP wireless keyboard for my HP Touchpad.  I cannot figure out how to work the arrow keys.....is there a user manual I can find online about navigating my keyboard?  Thanks so much for your help.  

    Hi,
    There is a quick guide in the box. You may be able to find a manual for it but do you know what is it ? HP has many wireless keyboard models.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Keys on wireless keyboard not working

    Finally got my wireless keyboard to pair.  However the only keys that work are some of the function keys - nothing else works.
    imac with OS X 10.9.1  ---- have zaped PRAM etc - done a hard re-start - changed batteries -- all to to avail.  Took keyboard back to store where it worked fine on their computer.  Can't figure out how to get tech support - apple makes it as difficult as they can to get any support.  Keyboard is brand new.
    Incidently the only way I have been able to 'pair' is by going to Bluetooth in preferences rather than 'Keyboard'.  If I try the 'Keyboard' route it cant find the keyboard.  But if I go to 'Bluetooth' in preferences it will show as connected which it obviously is because some of the function keys work - but nothing else.
    Would appreciate any ideas.

    I found the problem.
    'Mouse Keys'  was enabled.  On my computer System Preference>View>Accessibility>Mouse & Trackpad.
    Took me 21/2 hrs to figure this out.  Should be easier to find these solutions.

Maybe you are looking for