Is there a way view the internal lines of perspective grid?

It would be very beneficial to view all of the internal lines of the sectioned rectangular prism that the perspective grid consists of. This is a standard workflow for drawing 3 dimensional objects. Without this, it is very difficult to draw accurately.
Essentially this but in perspective mode:
http://mathforum.org/workshops/sum98/participants/sanders/IsomGrid.html
This doesn't appear possible to in CS5. Please specify if this is not the case and if it is possible in CS6.

Do you mean doing this?
You have toi use the proxy to select the different planes and shift key if you are drawing to that plane but on the grid's base in this case the top of the cube.

Similar Messages

Is there anyway to view the purchase order information foreach transaction

hi sap techies
Currently the FAGLB03 does not display the vendor related information for transactions coming through as a goods receipts (transactions processed by receiving dept) and/or related to purchase orders. Is there anyway to view the purchase order information for each transaction? For example, we cannot see vendor code/name, po #, etc.

HEllo,
FAGLL03 displays information from the line items of the accounting documents. If the information you want to display exists in tables you can display. But if the information you want comes from other tables you cannot display.
As a workaround you can check the SAP note 1034354 which tells you how to add the offsetting accounting information and then you cna display some of the information you want. To do so you can create your own coding into a BADI implementation.
REgards,
REnan

Is there a way for the sender of an email to see if it has been read

is there a way for the sender of an email to see if the email has been read?

Some email clients allow for you to request a read receipt, but the sender also has the ability to refuse to send it as well. Much of that is controlled on the receiving end.

Is there any way that the magic mouse might work on the iPad?

I just got the iPad 3 and is there any way that the magic mouse can work alone or with the keyboard on it? If not, can the mouse work with a PC?

tonefox wrote:
The magic mouse can't be used with an iPad simply because Apple has chosen not to include support for it.
Which is fair enough. Where are you going to put this mouse in order to use it with an iPad... you need a handy flat surface... oh, I know - the iPad screen. Much easier than moving your fingertip around it.
You would put it the same place you put the wireless keyboard.
In fact the existing keyboard support is one of the big reasons many of us would like to see mouse support added. You see the problem is that when you use a keyboard you have to reach up and over to tap the iPad screen. By Steve Jobs own admission* the arm tires quickly when you have to do this repeatedly. In this particular situation a mouse would be more ergonomically sound.
There is also the issue of access for the disabled. Although iOS does have many accessibility option, at present none of them help those with severe spinal damage or certain amputees. Including mouse support means you could also use devices like the "suck and puff"... A mouth controlled joystick designed for people with these disabilities.
* He was talking about touchscreens on notebook computers, but it's the same concept.

Is there a way for the CC desktop app to recognize already installed software?

Is there a way for the CC desktop app to recognize already installed software? Initially the CC app had all my installed software listed but since one of the patches it no longer knows what I have installed. I can still use everything but I'm worried I will encounter issues if I am unable to change this situation. I have already looked through multiple discussions looking for an answer so if I have missed the solution my bad.
Cheers
Kelly

You would have to run teh Cleaner tool and reinstal lfrom scratch. Something botched your installer database.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

I buy single songs before the album comes our and when I buy the album the song doesn't show up on the album, its still a single. Isn't there a way where the single becomes apart of the album?

I been buying songs that are singles, like for example: Give Me Everything (Ft. Ne-Yo) by Pitbull and then I bought Pitbull's new album Planetpit and the song didn't show up as part of the album. It still says that the song is a single. Isn't there a way that the songs from pre-ordered albums or singles suppose to be added to the album after the song is purchesed?

Drag the artwork from the artwork window to the desktop. Then, select the song without artwork and drag the artwork to the blank artwork window.

Is there a way get the actual query that was excecuted

I have a large query with lots of <cfqueryparam 's
Is there a way get the actual query that was excecuted so I can debug it/ find out what the problem is, no sql error just logic error

Personally, I think the easiest way is to use the powerhouse combo of Firebug and ColdFire. (Sorry if you already know this) Firebug is a plugin for Firefox for debugging (great JavaScript debugger in it!). ColdFire is a ColdFusion debugger that hooks into Firebug.
Firebug: https://addons.mozilla.org/en-US/firefox/addon/1843
ColdFire: http://coldfire.riaforge.org/
There are a couple of steps to installing ColdFire on your server (in addition to the Firefox plugin) but it's just a matter of copying a CFM file into a particular folder on your server's CF install. Then you just select ColdFire as the debugging output option in the CF Administrator and you're good to go (the ColdFire zip archive has an install doc).
Once you're using it, ColdFire lets you see all your queries: the actual SQL, the execution time, whether or not it's cached, etc.
While there are other techniques for seeing your SQL, I've always found ColdFire to be the easiest to use.

Is there a way customize the community Notifications, some instant, some daily/weekly summaries?

Is there a way customize the community Notifications, some instant, some daily/weekly summaries? I need some of the discussions emailed to me instantly, while others, the threads that take a while for Apple to correct, are needed in a daily summary and/or a weekly summary. Is there a place to do this or do I have to create rules in Mail ?
Thanks in advance.

Not that I know of, however it's not a bad suggestion. I'd recommend posting to www.apple.com/feedback. Don't expect to hear back though.

Is there a way to use Internal Mac Speakers with something stuck in the headphone jack?

A while ago, I broke a pair of headphones in the jack of my Macbook Pro. This means I can't use the external speakers either, and it's very annoying. It's now been a year, and I have been getting by with a combination of using Wifi2Hifi, a USB audio adaptor, and switching to Windows to use my speakers. Is there any way I can override the Mac software to make my speakers available to use like they are in Windows? I lost my USB adaptor a couple days ago, and I really don't want to wait for a new one to come in the mail if I can just get my internal speakers to work. I would prefer to use Mac because I have 12,000 songs in my itunes and my external Hard Drive is formatted to Mac, so when I want to watch the movies I have stored on it, I can't do it in Windows.
Also, I'm aware of the "Use Audio port for:" option, but I can't select this. I see the text, but there's no dropdown menu.

If you have Office 2004, it won't run on Lion. You have three options:
1. Upgrade to Office 2008 or 2011 for Mac
2. Download the free Office suite Libreoffice
3. Buy Apple's 'Numbers' (for spreadsheets), 'Pages' (for word processing) programs and/or 'Keynote' (for powerpoint) from the App store. Combined cost is still a lot cheaper than Office and they will read and export is all Office formats.
A fourth option, if you can't live without 2004 for some reason, would be to revert to Snow Leopard.

Is there any way around the ETF

So Verizon sold me a "global" phone but they conviniently forgot to tell that global service is not going to work with this phone. I was surprised to learn about it when I called from them from the airport to activate it. I called to cancel because I was under impression that I had 30 days but as it turns out VZW only gives you 14. Now I'm stuck with 2 lines and a family plan and VZW is asking $690 ETF. Is there any clause that would let me out of this contract without paying the ETF since I was sold a device and service that is not working as promised?
BTW perhaps someone wants to get a family plan with two lines and 23 months on the contract? I'm willing to pay for one month worth of service.

Obviously I was refering to Incredible 2 that was sold to me as a "global" phone. I know that VZ's iPhone 4 is not a global phone unlike the AT&T's one.
The Incredible 2 did come with Vodafone SIM card but it never worked in Western Europe. The SIM card didn't work in another unlocked GSM phone.
Before leaving U.S. I called VZ customer service from the airport and asked to activate international romaing on my new shiny Incredible 2. The CSR was very nice and tried to help but apparently something didn't work and he gave me a phone number to call: 888-866-6924 (he actually had to text me that number, apparently the phone company cannot transfer phone calls between its own offices. Well at least he didn't ask me to write it down). I'm still wondering was it wrong phone # or did VZ manage to build unbreakable IVR maze. I didn't figure out a way to talk to a live person. It asked me for SSN (couldn't find a match) or my VZ employee number which I don't have as I am not employed with VZ. Standard tricks, like wrong choice, *, # etc didn't work either. At that time I spent well over an hour on that and my flight was boarding so I decided to shoot VZ an email instead and hope that next day when I land in Europe my phone will magically work.
I received an email reply a day later with apologies and offer of account credit in the amount of my last payment (that was very nice btw). But still no word on making the international service work. I replied and asked if I can be 100% sure that next time I travel the phone will work and the answer was negative. So then I asked to cancel the service since it was less than 30 days since activation and VZ said it won't cancel unless I pay the ETF as they only give 14 days grace period.
So I'm wondering if it'd be possible to terminate the contract based on fact that I didn't get the service I was sold? VZ salesperson said that it will work internationally but I don't have anything in writing to support that.

Is there a way in the Soft Proofing mode to showHIGHLIGHT clipping warnings?

Is there any way to show HIGHLIGHT clipping warnings ON my image while in the Soft Proofing mode? I am NOT looking to see if color are out of gamut...but if Highlights and shadows are being clipped.

Sorry JimHess, that does not work. If you adjust for highlight clipping in the normal LR mode, which is in the Pro Photo color space, there will still be clipping in the sRGB color space for highlights. You can test this by adjusting an image in the Pro Photo color space, making your highlights kiss each end of the histogram, and then open that image in PS or ACR in sRGB mode. You will see major clipping that you did not see in Pro Photo color space in LR. I'm looking for a way, in Lightroom, to see clipping warnings on my image, while it is being view in the sRBG color space...so I know, once it's printed in that color space...I won't have clipped highlights.

Is there any way changing the priviledge after starting the managed server with the other user

Hi,
is there any way to change the user privilege after i have started the managed
server with one user.....say for example ....i have started one of my Managed
server as "root" ...but after that i wanted to make this instance work under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangita

Thanks again Rob.
Rob Woollen <[email protected]> wrote:
>
>
sangita wrote:
Thanks Rob for been so quick in responding.
I have 3 questions for you:
Running a server under root is a huge security hole.My Question: 1) what are the probable security issues while runninga server under
root ?
are these security issues external(from outside world) or internal(internally
within a company) ?
Iam basically curious to know external threats.
The problem is the root user can do anything. So if someone finds a
security hole in your server, then they have complete control of your
system.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.My Question: 2) What is the harm in using port 80 for webserver andwhy do the
people wanted to bind to a port < 1024 ?
People normally use 80 for web servers because that's the well-known
port.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.My Question: 3) Suppose iam having a cluster of 2 Managed servers runningon port
7070. And Iam having a Iplanet server working as a Webserver that basicallyproxies
requests to this cluster. Then what is the best approach that i shouldfollow
in this context.....to be honest with you ....i still couldnot understandwhat
does "binding" the webserver port to a managed server in weblogic mean.
I would have your firewall redirect 80 to whatever port Iplanet is
listening on and then have iplanet proxy to WLS.
Do not run your WLS servers as root.
-- Rob
Iam sorry for asking these "silly" questions(in your opinion) ...butiam a bit
confused.
thanks, sangita
Rob Woollen <[email protected]> wrote:
Running a server under root is a huge security hole.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.
There is a set uid option in WLS where you start the server as root
and
then after it binds to the low port, it will switch to another userthat
you specify.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.
-- Rob
sangita wrote:
<Sure, it's possible to do this, >
how to do this?
<but why do you want to do it? >
Iam not sure why this group (the other group than me) does start theirserver
as "root"...but somebody from that group asked me about this today.
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.then what is the best approach and what are the pros and cons if westart the
server as "root" OR as different user ????
please advise ....
thanks again.
Rob Woollen <[email protected]> wrote:
Sure, it's possible to do this, but why do you want to do it?
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.
-- Rob
sangita wrote:
Hi,
is there any way to change the user privilege after i have startedthe managed
server with one user.....say for example ....i have started one
of
my Managed
server as "root" ...but after that i wanted to make this instance
work
under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangita

When you stop a slideshow in Muse by clicking on a thumbnail, is there a way for the slideshow to automatically resume?

Is there a way for a slideshow in Muse to resume after you have stopped it to spend more time viewing one of the images?

Hi
With current stage we dont have resume feature for slideshow.
You can check our future release by joining pre-release forums.
Thanks,
Sanjit

Is there a way to provide internal message counts?

GW 8.0.2HP2 Agents on Windows 2008 servers
Is there a way to determine the number of internal messages sent during a given time? Boss wants to know how many internal messages were sent during July of this year.
We have 4 domains, 6 post offices, 2 gateways:
1 - primary domain for admin stuff, LDAP, eDir, etc.
1 - secondary domain for user post offices
6 - user post offices
1 - secondary domain for GWIA
1 - GWIA
1 - secondary domain for WebAccess
1 - WebAccess
Thanks for any info on this.

k. Thank you.
>>> DZanre<[email protected]> 8/9/2012 11:26 AM >>>
"Steven Eschenburg" wrote:
> Is there a way to determine the number of internal messages sent during a
> given time? Boss wants to know how many internal messages were sent during
> July of this year.
If you still have the logs maybe. GWAVA's Redline provides some of this
information, but there isn't a built-in way in GW to see how much "happened".
You can get a snapshot of what is still in the system at any given time, but not
a running total.
Danita
Novell Knowledge Partner
Upgrading to GroupWise 2012? http://www.caledonia.net/blog/?p=514
http://www.caledonia.net/gw12upg.html

Is there a way for the Yosemite maps app to add address to an existing contact (in contacts app) instead of creating new contact record with blank name (not useful)?

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

Is there a way view the internal lines of perspective grid?

Similar Messages

Maybe you are looking for