Is there a way when saving a file to have duplicates rename themselves automatically to example(1)?

Switched from Chrome recently, and with that if you go to save a file and you already have a file with that name it will automatically rename it to whatever it was with a number in parentheses afterwards [so something like funnypic15(1).jpg]
Firefox just gives you a warning that a file with that name already exists after you try to save it. Anyway to get Firefox to behave like Chrome about this?

I don't know if there is an option for this. The file rename is a system
element. Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.

Similar Messages

Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive: Could not save because the disk is full.

I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud

Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud.
Basically i have a 16gb ipad2 (big mistake) so space on the ipad is precious. obviously i occasionally need to remove games/apps to make way for other apps from my cloud. The problem is, when I remove an app to make way for the new app I lose all my progress in that game apart from the option to save leader-board stats (which is the least important thing to me). Its very annoying to get so far in a game only to have to remove it to make way for a movie and lose all my progress!!!!!
Any way round this?

I do not know how to save game data when deleting an app, but as for updating, if you connect the ipad to a computer and do the update through itunes, you will not have to download the update package to the ipad just to the computer. so you don't have to free up quite so much space, as for movie and photo storage you can look at the sandisk wireless and airstash wireless SD card adapters, they create their own wireless network and come with apps that allow you to store and then stream movies to the ipad instead of loading them to the ipad storage.
http://www.airstash.com/
http://www.sandisk.com/products/wireless/media-drive/

Is there a way to open a file when it says it needs DMR?

Is there a way to open a file when it says it needs DMR?

Maybe you can let her play on your computer where it may be easier to restrict what she can do, provided there's an OS X equivalent. Of course supervision is probably the safest solution until she is old enough to understand she shouldn't do anything that's not permitted. But then she'd probably be old enough not to need to learn her ABSs.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

Using pages, I saved the wrong file thereby overwriting the file I want. Is there any way to get the file I want back?

Is there any way to recover a file if you have overwritten it?

When I do that: Pages>Revert to > I don't get a chance to "Browse all Versions" Instead it says, "no Document"

When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact? These are not symlinks or symbolic links, they're all alias files and folders.
Is there any software out there that might help me with a solution? Are there any tricks or tips you can give me to try?

Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

How automatically saving a copy when saving a file?

Hi,
For my pictures (RAW and PSD) I use a separate external disk, our Timecapsule would be full in a year. My work flow in copying is normally no problem. But of course now my iMac drive is 'broken' I find a few PSD-files not be copied to the external drive. I wondered, is there a simple way to automatically save a copy when saving a file (and replace an earlier version of the copy)?
Murk

Thanks. FWIW I'm very keen on improving tethering and lobbied Adobe endlessly until they added the overlay for shooting into layouts because it was a major reason why some of my clients were unable to switch to Lightroom from PhaseOne. But we have to be realistic and remember that tethering just isn't a key market for Adobe as it is for PhaseOne, so progress is painfully slow. For example, where is live view or setting exposure which are in PhaseOne? I'd be amazed if we get those features for a few versions, and that's why I point serious tethered shooters to other solutions. And realistically, assuming your understanding of the SDK is correct you shouldn't expect a change until the next full version of Lightroom. Good if it happens, but I wouldn't bet on it.

The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
Hi There,
The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
Context where exception was caught:
Func:
CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
User Name     : slaney
OS Version    : 5.1.2600 (Service Pack 3)
Exception Code: C000001E
Exception Addr: 457BC448
Return Address: 457BC448
Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
Module Name   : FieldPoint71
Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
Source File   : (not available)
Return Address: 481000C3
Function Name : (not available)
Module Name   : (not available)
Parameters    : 00000000 00000000 00000000 00000000
Source File   : (not available)

Hi,
I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
Let me know.
DirkW

Is there a way to see a file browser on iCloud? It says my account is filled up to 5G already and I can't imagine what it moved over to there that was that big.

Is there a way to see a file browser on iCloud? It says my account is filled up to 5G already and I can't imagine what it moved over to there that was that big.
I'm wondering if it moved my rhapsody music to the cloud (which is pointless) so I shut off 'document' sharing in case that's the problem, but it's still saying I'm at 5G right now.
When I go to icloud.com all I see is the dumb app icons, with no clue as to what's taking up that disk space.
btw, I did not sync photos from the get-go.
A file browser? please? I need to see my cloud.
sigh

Have you enabled Automatic Downloads on all of your devices? This would download all of the books to all of your devices when you download on any device - as long as you are using the same Apple ID and iTunes account on all of your devices.
Go to Settings>Store>Automatic Downloads>Books>On. When you download a book on one iDevice, it will download to all of your iDevices. This will only work for downloads moving forward from the moment that you turn the setting on. You will have to download the previously purchased books to all of your other devices.
With iCloud, you can start reading the book on one device and then pickup where you left off on another device.

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

FrameMaker crashes when saving a file as XML

Hello -
I am encountering a problem saving a .fm file as a .xml file. I have saved many .fm files as .xml files in the past with no issues. However, lately FM crashes with a "serious error" on certain files when I try the same save process. My initial thought was that the file was somehow corrupted, but this morning I ran into this scenario: I have 3 FM licenses in my office, I was trying to save a .fm file as .xml and FM kept crashing. So I had another co-worker try to save the exact same file as a .xml file and it WORKED!?!?!?!
We all were using FM 11, but I have since installed FM 12 thinking that version 12 wouldnt have the same problem, but the same issue is happening with both versions of FM. I read that FM has issues when working across a network so I have tried it both ways, across the network and locally and the same issue occurs.
Again, this problem occurs occasionally on various files - not every file, but as previously mentioned I was able to successfully save a file on a different machine that I could not save on my machine. I have the most recent log file that was generated after a crash:
[*** LOG FILE REMOVED BY MODERATOR***]
Thanks in advance for any help in this matter.
Gavin

An update -
So FM now appears to crash "sometimes" when saving as an xml file AND when saving the file in general. I have 3 machine with FramMaker installed, first with version 11 now with version 12. These 3 machines are all identical as far as SW running on them, etc... I have been unable to detect a pattern as to when FM will crash thus far. Sometimes it will crash when I try to save the file as an .xml file and sometimes it will save just fine. I have resorted to marking up the document a little at a time, saving the file, then trying to save as an XML file. It will work sometimes and other times it will crash. Sometimes it crashes when trying to save the .fm file other times it works; sometimes it will crash when I try to save the .fm file as a .xml file, other times it will work. About the only thing in common that I have found thus far is the fact that it happens with the same file over and over again; meaning that if I have a pool of 12 files that I need to load into FM and markup, 11 of the 12 files may work just fine and the 12 file will not - it will crash FM at some point in the markup/saving process every time. One might guess that the original file is somehow corrupt and that may be, but at this point I am not sure how I prove that is the case as FM seems to load it in just fine and I can save it right off the bat just fine. Does anyone know how I can prove that the structured file i receive initially is corrupt when it loads into FM fine? If we were causing some issue with the import of our modified EDD then why dont we have the same issue with the other 11 files in the batch as they all are using the same EDD?
I have sent my most recent log files to adobe tech support this morning. I have tried saving files on shared drives as well as on local drives. I have tried the same process on the other workstations with the same results.
Does anyone have ideas on how I can isolate a problem with the source file (structured doc) or on why FM is crashing when I perform these actions?
Thanks,
Gavin (Ryan)

Adobe bridge crashes when saving illustrator files

Hi there,
We are developing custom connector using Adobe Drive SDK for our DAM system, the integration with CS was working fine, we recently updated Adobe Drive to 4.2, and we are encountering bridge crashes when saving illustrator file. It didn't happen with older version(4.0.2) of Adobe Drive, not sure why. I pin point the part that causing the issue: in our custom connector, we have READ_XMP_METADATA capability which we need to display the thumbnails and previews, and in the ftp sample connector, this capablity is not included originally, so the issue does not happen, but if I add this capabilty, the crash issue happens as well. If we exclude this capablity from our connector, this crash issue doesn't happen.
We noticed this only happens when saving illustrator file, not photoshop or indesign, and it seems that only in illustrator, when save, and the bridge has the current file folder showing, we are seeing there are twice folder refreshes, and usually it will crash after the second time. In photoshop and indesign, we don't see folder refreshes. If switch to other folder, the crash won't happen. We tested on both windows and Mac, on Mac, this seems happen less often. Another thing we noticed is in debug mode, or we have many debug logging turned on, the crash happens less often, if it is deployed with no debug logging, the crash happens almost everytime. So we are guessing it might be some synchronization problem.
Could you please advice what's the cause of this issue?
Thanks,
Katherine

Has it ever worked?
What kind of files are they and where do you save them?
Is a printer connected, set up and turned ON?
Have you already tried resetting the preferences?
Generally it's not a good idea to just save old files, because then some artwork may be automatically flattened. Illustrator will save the file to the old version file-format and if you used new features in-between, those cannot stay live in the old version file format.

Is there a way when saving a file to have duplicates rename themselves automatically to example(1)?

Similar Messages

Maybe you are looking for