Is there a weblogic 11gr1(10.3.6) plugin for apache 2.4 on windows

I need to find out what version of Web Server Proxy Plugin is the correct one to work with WebLogic Server 11gr1 (10.3.6) and Apache webserver 2.4.
WebLogic Web Server Plug-In 12c indicates that it is backward compatible with WebLogic Web Server Plugins 11gR1 but supports only 64-bit Web Servers. Please refer to Oracle Weblogic WebServer Plug-In 12.1.3 documentation for more information.
However when I goto the documentation I do not find any information.
Any help would be appreciated!

Hi,
Can you check your web-server if your web-server is 64 bit then you can go ahead and use the 12c plugins .
As it is always good to be on the latest plugins .
If its a 32 bit then you have to stay on 11g plugins for the Webservers.
Certification matrix for 10.3.6
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
Hope it helps

Similar Messages

Weblogic plugin for Apache 2.2

Where should I download the weblogic plugin for Apache 2.2?
I'm running WL 10.3 on windows xp.
Please provide the link .
Thanks,
sripos

Hi
On this link, click Accept license and go all the way to bottom and click on All Versions link named next to "Oracle WebLogic Server Web Server Plugins 1.1"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
That click should open this below link. Accept the license and Download the zip file. Then follow the instructions.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
Thanks
Ravi Jegga

Is there an apache plugin for 2.0.43 on windows

We are using apache 2.0.43 on our HP box with the WL 7 plugin. The lastest plugin
that we have for windows is for apache 2.0.39. Is there a newer plugin and/or
source available?

I was loking for that too...
I found it at <BEA HOME>\weblogic700\server\bin
The old file is 532K and the one you want is 536k
HTH
--Geezer

Weblogic plugin for Apache 2 problem

Hi guys,
Is it possible that the plugin corrupt or append leading zeros to a text
field on the form data of the application from example fund transfer
amount USD 20 then suddenly when it reaches weblogic is USD 200.
Regards,
Kenneth

Hi
On this link, click Accept license and go all the way to bottom and click on All Versions link named next to "Oracle WebLogic Server Web Server Plugins 1.1"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
That click should open this below link. Accept the license and Download the zip file. Then follow the instructions.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
Thanks
Ravi Jegga

Is there a Metro version of Firefox that works for Non-Touch computers with Windows 8.1?

I have a 64-bit Windows 8.1 computer of which doesn't support Touch features. Is there a Metro version of Firefox that works on 64-bit Windows 8.1 computers that don't support touch? If so, how can I get it?

Okay, thanks. Tbh the only advantage I thought of was the ability for it to open in a Windows 8 mode. Basically like how IE 10 does when opened from the start menu.

Intermittent problem with weblogic plugin for Apache

Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron

Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron

Is there a VFW or WDM frame grab plugin for Photoshop?

I'm looking for a plugin that will allow me to capture a single frame into Photoshop from a video feed from a device using WDM or VFW (Video For Windows) drivers. I have a video device that is using WDM or VFW drivers, but no TWAIN or WIA driver is available for my device. I need to be able to capture a frame into Photoshop from my video-input device which is using a WDM or VFW driver. I'm hoping if one does exist, it is compatible with Photoshop CS1, because I'm using that older version of Photoshop, and don't plan on upgrading yet (it seems to do almost anything I'd ever need a graphics program to do). I'm not even sure such an input plugin exists, but if it does, please let me know. Thanks in advance.

Nope. Such a thing would have to come from the camera/ recorder manufacturer or an enthusiastic hobbyist. But the original CS? Do you see how it is possibly completely unrealistic to expect such a plug-in to exist, given that this version had no video infrastructure at all? Sorry to be so blunt, but that's ridiculous...
Mylenium

Announcement: BEA WebLogic Plugin for Eclipse

          ObjectLearn has announced the pre-release version of a completely free Eclipse
          Plugin for BEA WebLogic Server. Lomboz J2EE plugin for the Eclipse platform
          supports all J2EE 1.2 and above certified application servers which are also
          100% Java. Current pre-relase version is capable of launcing the WebLogicServer
          inside the eclipse environment. It Also has J2EE Project types, wizards, and
          smart JSP editors. It supports development time repeated deployment of web applications
          to WebLogic server instances.
          Lomboz is available for download at http://www.objectlearn.com
          Information about the Eclipse Project is available at http://www.eclipse.org


          ObjectLearn has announced the pre-release version of a completely free Eclipse
          Plugin for BEA WebLogic Server. Lomboz J2EE plugin for the Eclipse platform
          supports all J2EE 1.2 and above certified application servers which are also
          100% Java. Current pre-relase version is capable of launcing the WebLogicServer
          inside the eclipse environment. It Also has J2EE Project types, wizards, and
          smart JSP editors. It supports development time repeated deployment of web applications
          to WebLogic server instances.
          Lomboz is available for download at http://www.objectlearn.com
          Information about the Eclipse Project is available at http://www.eclipse.org

Announcement: WebLogic Plugin for Eclipse

ObjectLearn has announced the pre-release version of a completely free Eclipse
Plugin for BEA WebLogic Server. Lomboz J2EE plugin for the Eclipse platform
supports all J2EE 1.2 and above certified application servers which are also
100% Java. Current pre-relase version is capable of launcing the WebLogicServer
inside the eclipse environment. It Also has J2EE Project types, wizards, and
smart JSP editors. It supports development time repeated deployment of web applications
to WebLogic server instances.
Lomboz is available for download at http://www.objectlearn.com
Information about the Eclipse Project is available at http://www.eclipse.org

It should start up automatically. Just change perspectives if it doesn't do it for you. Thanks, Jeremy

Is there an Adobe Acrobat plugin for FireFox/Mac OSX?

Any of you are aware of Adobe Acrobat Plugin for FireFox on Mac OSX? There seem to be one FireFox PDF Plugin for Mac X. But am looking for Adobe plugin.
Thanks,
Raj

Hi ..
You can use the pre installed Preview app for editing .JPEG files.
Preview is located in your Applications folder.

Installing WebLogic 11gR1 zip distro on Ubuntu 10.10

Hi. I'm having a problem installing WebLogic 11gR1, the zip distribution of Ubuntu 10.10.
I created this path:
/usr/local/programs/WebLogic11gR1
I put this in .bashrc
export MW_HOME=/usr/local/programs/WebLogic11gR1
I closed that terminal and opened a fresh terminal.
I moved the *zip distribution into
/usr/local/programs/WebLogic11gR1
I unpacked the zip and tried to run the configure.sh script with variations of
sh ./configure.sh
and I get this error message:
=====================================================
./configure.sh: 19: [[: not found
./configure.sh: 19: -d: not found
ERROR: You must set MW_HOME and it must point to a directory.
where an installation of WebLogic exists. Ensure you point
this variable to the extract location of the zip distribution.
=====================================================
I ran echo $MW_HOME and got
/usr/local/programs/WebLogic11gR1
Which is correct.
Any ideas what is going on and how I can fix it?

the config.sh wouldn't pick up my JAVA_HOME either. I opened up the script and found that all it did was call another script, so I ran that script myself with no problems.

WebLogic 11gR1: Where can I find the docs and the examples

I just installed the Zip Distribution of WebLogic 11gR1 on Ubuntu 10.10. I also installed the supplemental zip, that contained samples.
On the WebLogic 9 installation on a windows box at work, starting up WebLogic causes it to bring up a browser with a web page with very nice documentation on it, including hyperlinks to the examples. How do I find this page with my at home ZIp Distribution?

The README that accompanies the WLS supplemental zip file describes how to create the samples:
http://download.oracle.com/auth/otn/nt/middleware/11g/wls/README_SUPP.txt?e=1311046330&h=9c8a6b93b066372a53ca5d65bafcb9a5
>
WLS Supplemental Zip Distribution for Oracle WebLogic Server @WLS_VERSION@
The WLS supplemental zip distribution is intended for development use. It is
supported on Windows, Linux and Mac OS X systems. It contains the necessary
artifacts to develop and test applications on WebLogic Server.
WLS supplemental zip requires that the primary zip distribution is already set
up and is ready to use. Supplemental zip contains samples, evaluation database
(Derby) and L10N console help files.
The following instructions should help in quickly setting up the extra
components in WLS via the supplemental zip. Please refer to the general WLS
documentation for detailed instructions.
QUICKSTART
1. Ensure that WLS has been installed under MW_HOME (eg: /home/myhome/mywls)
using the zip distribution - wls@WLS_VERSION@_dev.zip
2. Extract the contents of the supplemental zip MW_HOME
3. Setup JAVA_HOME and MW_HOME variables in the current shell.
This should pre-exist.
Linux
$ export JAVA_HOME=/home/myhome/myjavahome
$ export MW_HOME=/home/myhome/mywls
Mac
$ export JAVA_HOME=
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home
$ export MW_HOME=/home/myhome/mywls
Windows
> set JAVA_HOME=C:\home\myhome\myjavahome
> set MW_HOME=C:\home\myhome\mywls
This version of WLS requires JDK 1.6. Ensure that you have the proper
JDK version installed.
4. Run the installation configuration script in the MW_HOME directory
(This step is required to be run only once. If you move the installation to
another location/machine, you need to rerun this step)
Linux/Mac
*$ ./run_samples.sh*
Windows
> run_samples.cmd
This step creates the sample domains. The sample
domains should be created in MW_HOME/wlserver/samples.
5. WLS can be started from these sample domains by issuing startWebLogic command.
This will also bring up the WLS console in the default browser.
6. Start a browser and open up url - 'http://localhost:7001/console' to
administer the server.
WHAT IS INCLUDED
# Samples
# Derby DB (for use with Samples)
# L10N versions of WLS console help files
CLEANUP
The supplemental zip contents are interleaved with the base zip contents. You
have to delete the MW_HOME directory which will delete both the WLS
installation as well as the supplemental zip contents.

Setup issues: Apache plugin for Weblogic

Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246)     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228)     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841)     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)     at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021)     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================

Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
     <Location /AppConsole>
     SetHandler weblogic-handler
     </Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D

IPlanet plugin for WebLogic not working - cannot find function named wl_init

Hi,
I have been having this issue for the last two days. It relates to
IPlanet plugin for WbLogic. Following is the error I get:
[17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
Configuration initialization failed: Error running init function
wl_init: unknown error
Here is my environment:
SUN E-250 Server
Solaris 8.0 with recommended Patch-set
iPlanet-WebServer-Enterprise/6.0SP4
Web logic 7 SP2
Here is how I have edited magnus.conf to include the following lines:
Init fn="load-modules"
shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
s="wl_proxy,wl_init" Init fn="wl_init"
#ServerRoot /usr/iplanet/servers/https-cablevision5
..... rest of the file ..........
As you have noticed I have put everything regrding plugin in one line.
I have also used various other combinations of breaking this line
into multiple lines but no use.
What I have also noticed is that if I change the name of libproxy.so
to some other arbitrary file name that does not exist, even then the
error message does not change. So it looks like the library is not
even being loaded.
The library file is owned by root and has permissions to read and
execute for everyone.
I will really appreciate is I can get any help. I have noticed that
there are folks who have posted similar problem, no one gave an answer
to them. Please be more generous this time in furnishing with your
opinion.
Thanks
Jamal

I will try and be as descriptive as possible. I hate the posts that
dont give any help.
Anyway you did not mention anything about your obj.conf configuration.
Here is how it should look, e.g.:
Init fn="load-modules" funcs="wl-proxy,wl-init"\
shlib=/usr/local/netscape/plugins/libproxy.so
Init fn="wl-init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl-proxy WebLogicHost=myweblogic.server.com\
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
Check the following url:
http://www.weblogic.com/docs51/admindocs/nsapi.html
Ok,so you probably have those in there. If not, then please check
that you have directives in obj.conf and the magnus.conf as well.
Again the service line should be all one line.
Next, are you proxying by path or by suffix. I.E. do you want
everything to go to weblogic or just .jsp. You can configure either
way. This will change your directive. Specifically ppath means proxy
by path. To proxy by file extension (or what i call suffix) then look
at this url for specifics:
http://www.weblogic.com/docs51/admindocs/nsapi.html#exts (notice the
anchor in the link)
Post how it goes...
a.r.
[email protected]
[email protected] (Jamal Najmi) wrote in message news:<[email protected]>...
Hi,
I have been having this issue for the last two days. It relates to
IPlanet plugin for WbLogic. Following is the error I get:
[17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
Configuration initialization failed: Error running init function
wl_init: unknown error
Here is my environment:
SUN E-250 Server
Solaris 8.0 with recommended Patch-set
iPlanet-WebServer-Enterprise/6.0SP4
Web logic 7 SP2
Here is how I have edited magnus.conf to include the following lines:
Init fn="load-modules"
shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
s="wl_proxy,wl_init" Init fn="wl_init"
#ServerRoot /usr/iplanet/servers/https-cablevision5
..... rest of the file ..........
As you have noticed I have put everything regrding plugin in one line.
I have also used various other combinations of breaking this line
into multiple lines but no use.
What I have also noticed is that if I change the name of libproxy.so
to some other arbitrary file name that does not exist, even then the
error message does not change. So it looks like the library is not
even being loaded.
The library file is owned by root and has permissions to read and
execute for everyone.
I will really appreciate is I can get any help. I have noticed that
there are folks who have posted similar problem, no one gave an answer
to them. Please be more generous this time in furnishing with your
opinion.
Thanks
Jamal

Help with Apache plugin for WebLogic on HP-UX

Hi,
I am trying to get Weblogic 5.1(w/sp8) on HP-UX 11 talking to Apache 1.3.19.21(port
8080) also on HP-UX 11 ( both on same box ). I have WebLogic listening on port
9001, and I followed the instructions to configure apache and weblogic. However
when I do http://mymachine:8080/weblogic/portal/hello.jsp. I get unable to find
page.
weblogic is installed in /weblogic. The hello.jsp is located in /weblogic/myserver/public_html/portal/hello.jsp.
Apache is installed in /opt/apache.
The Apache httpd.conf file contains the following:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
WebLogicHost localhost
WebLogicPort 9001
</Location>
What am I missing ? The error_log for Apache shows the following:
[Mon Nov 12 11:21:09 2001] [warn] Loaded DSO libexec/mod_wl.so uses plain Apache
1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)
[Mon Nov 12 11:21:10 2001] [notice] Apache/1.3.19 (Unix) PHP/4.0.4pl1 configured
-- resuming normal operations
[Mon Nov 12 11:21:32 2001] [notice] child pid 13248 exit signal Segmentation fau
lt (11)

Well... there is a warning in the log file saying that it might crash - and then
it crashes. Check that you are running a supported platform, if you are, contact
BEA Support.
I would discourage the use of forwarding to 'localhost'.
Mike
"Niranjan Perera" mckesson.com wrote:
>
Hi,
I am trying to get Weblogic 5.1(w/sp8) on HP-UX 11 talking to Apache
1.3.19.21(port
8080) also on HP-UX 11 ( both on same box ). I have WebLogic listening
on port
9001, and I followed the instructions to configure apache and weblogic.
However
when I do http://mymachine:8080/weblogic/portal/hello.jsp. I get unable
to find
page.
weblogic is installed in /weblogic. The hello.jsp is located in /weblogic/myserver/public_html/portal/hello.jsp.
Apache is installed in /opt/apache.
The Apache httpd.conf file contains the following:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
WebLogicHost localhost
WebLogicPort 9001
</Location>
What am I missing ? The error_log for Apache shows the following:
[Mon Nov 12 11:21:09 2001] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache
1.3 API, this module might crash under EAPI! (please recompile it with
-DEAPI)
[Mon Nov 12 11:21:10 2001] [notice] Apache/1.3.19 (Unix) PHP/4.0.4pl1
configured
-- resuming normal operations
[Mon Nov 12 11:21:32 2001] [notice] child pid 13248 exit signal Segmentation
fau
lt (11)

Is there a weblogic 11gr1(10.3.6) plugin for apache 2.4 on windows

Similar Messages

Maybe you are looking for