Is there a Windows 8 driver for HP DesignJet 750c?

I have an old DesignJet 750c printer/plotter that has been running as a network printer connected via Ethernet. It is running perfectly under Windows 7... I used the XP 64-bit driver with no problem at all. But I cannot load the same XP 64-bit driver under Windows 8 on another system... I get a 'driver not signed' error and the driver will not load. I notice that there are Windows 8 drivers for a host of other old HP printers and plotters, but apparently not for this one.... and yes, I did check 'Windows Update' for additional drivers.
Can I bypass the 'driver not signed' error somehow? Does anyone know of a driver for another piece of equipment that will work with my 750c? What is the solution for this?
--Dave Emery

The Designjet is a commercial product. I am linking you to the Designjet forums repost your question for better coverage.
Designjet Forums

Similar Messages

How to add JetDirect (A2591A) to W7 & Driver for Win7/DesignJet 750c+

Here is what I have:
-HP G71 wireless, windows 7 Home, laptop
-Linksys E2000 wireless Router
-HP JetDirect Ex A2591A
-DesignJet 750c Plus Large Format Plotter (Yes, I know it's old, but it's a backup unit until my 1055cm gets fixed).
Problem #1: I cannot find an HP driver for the DesignJet 750c Plus for windows 7, is there one? If so, where?
Problem #2: How to add JetDirect (A2591A) -750c Plus Plotter to my Windows 7 G71 wireless laptop. While using my wireless router and the JetDirect Ex. It is physically hooked up correctly. I belive that I need to be able to find out what is the I.P. address for the JetDirect, but I've been wrong before. Is there a link to show me how to do this somewhere?
Thank You in advance.

For 64 bit systems you can download the XP x64 drivers from here, then unzip the files into a new folder. Next go to the Devices and Printers folder, Add a Printer, select the proper port, then select "Have a Disk" and point to the folder where you unzipped the files.
To find the IP address the easiest way is to print a config page from the printer front panel.
This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is there a Windows 7 driver for the XMod?

I have searched all the boards but can't find anything. I did see some complaints on Amazon about it not working on Windows 7. It is still being sold, so you would think there would be a new driver.

I just bought Xmod through Amazon from Shoptronics. ?Although all my music files are on hard dri'ves connected to a XP PC, ?I just purchased (not deli'vered yet) a new PC from Amazon that runs Windows 7. ?I just received an answer about Windows 7directly from Customer Support, they state if it isn't on the list at:?http://support.creative.com/KB/showa...px?sid=605&h=3?then no support for Window 7 is planned. ?I do have a Laptop running Windows 7, and I'm about to disconnect and plug it in shortly. ?I will update this post with my results.
Update:
After unpluging Xmod from its USB port, I took transmitter to my Laptop that runs Windows 7. ?After plugging it in, and adding it via Control Panel hardware, it quickly was recognized by Windows. ?I powered it and receiver on, and it worked fine through Media Player and my stereo system. ?Still not quite as clear as my CD player, but satisfactory. ?May be having it installed first using the XP device add process allowed it to work on Windows 7 so easilyI'll be OK with it when the XP machine is retired, and my external hard dri've is used with my new Windows 7 PC. ?Does this help at all?

Is there a Windows 7 driver for a Scanjet 3970?

I have been upgraded to Windows 7 from 98 and have to run the generic scan sofware for every page since the generic sofware won't stay active for multiple scans.

Hello, this Scanjet 3970 does not support Windows 7.
Support only Windows Xp, Vista 32/64-bit
Click on the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=298549&lang=en&cc=us&...
You should try to installl vista driver see if it works, if you still having same problem, i recommend buying new hp scanner that supports windows7.
Hope this helps?
Regards
MikeHpTechMan

Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit

Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO

I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00

Windows 7 Driver for Color Laserjet 2605dn is PostScript Only -- Has Specific Issues

This network-connected printer runs fine under XP SP3 with a PCL driver downloaded from HP (5 or 6, I don't remember). New computer has 64-bit Windows 7. Now HP is telling me to use the built-in Windows 7 driver (see http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl... but all I can find is PS, no PCL. This driver works OK except on certain types of documents:
Printing a scanned document takes forever, if it prints at all.
Similarly for PDF pages that have background colors or anythign else unusual.
(I could send examples of problem pages it that would help...)
I can print these same documents easily and quickly on my XP computer with the PCL driver, so I'm assuming PS just chokes on these kinds of documents.
Is there an appropriate PCL driver for Windows 7 64-bit (or could I run a suitable 32-bit driver in my situation)?
Failing that, is there any other solution to this problem? (I can't keep a Windows XP computer around forever!) -- jclarkw

>> ... Any recommendation PCL5 vs. PCL6 with this old 2605dn? ...
As far as I can remember, the LJ 2605 printer has a very limited set of printer-resident PCL5 fonts, which means that:
Using bespoke software which directly generates print jobs (without the benefit of a driver) and which assumes that the normal set of LaserJet fonts will be available via standard font selection sequences, may result in unsuitable substitute fonts (from that limited set) being used.
The standard UPD PCL5 driver may also suffer from this problem (I don't know); even if it doesn't (i.e. it is aware of the limited font set), then use of other fonts in the source document will have to be satisfied by the driver either rastering the text (sending a bitmap image) or dynamcially generating and downloading a PCL5-encapsulated (subset) of the source (TrueType) font (which will increase the size of the print job).
As far as I'm aware, the PCL6 (PCL XL) intepreter in the printer includes the normal full set of fonts in the firmware.

How to develop 64-bit Windows device driver for NI-6602?

Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
Develop a Windows Kernel Mode Driver (“Device Driver”);
Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
Could anyone please give me some advices as soon as possible?
William Liao
Message Edited by Wiliao on 07-22-2005 04:12 PM

Hi All,
I am currently working on getting the health parameters
from the motherboard like voltage fan and temperature. I have already
already done this using 32 bit winio driver but i am not able to work
on 64 bit version. is there any driver availbale in 64 bit for
obtaining this parametes or some one help me to get a 64 bit winio
driver.
Regards,
Senthil prabu R

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Windows 7 driver for CanoScan LiDE 80?

Since upgrading to Windows 7, 64 bit, I have searched for a driver for my Canoscan Lide 80. Trying various suggestions to use other drivers like XP, Windows 7 32 bit have all failed. Is there a solution to this problem? Thanks.

Hello owg1!
Canon USA does not have a 64bit WIndows 7 driver for the CanoScan LiDE 80 scanner. We're so sorry for any inconvenience this may cause! We don't recommend installing other driver versions onto your 64bit Windows 7, but feel free to Contact Us for possible upgrade options available.
We hope this information helps!

Windows 7 driver for my original memory stick voice recorder ICD-MS1

When will Sony offer a Windows 7 driver for my original memory stick voice recorder ICD-MS1?
Cannot upgrade this great system on the new W7 OS on my laptop.
KJ

Hi jonsey60! Unfortunately we don't have any information if there will be any Windows 7 driver that will become available soon for this recorder. You may just bookmark this link for future reference.

Windows 7 driver for Scanjet 4370

Will there be a Windows 7 driver for the HP Scanjet 4370?
It seems that everytime that I upgrade my operating system I loose an HP scanner.

Digitizer wrote:
Will there be a Windows 7 driver for the HP Scanjet 4370?
This page indicates the driver is available from Windows Update and there will not be drivers from HP beyond that.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows 7 Driver for VFO230

Windows 7 driver for Creative Live! IM Pro model # VFO230 is needed. I can only find Windows Vista driver online at this time. I used this camera on windows vista service pack 2 but today got a newer computer with windows 7 operating system and would still like to use this camera. I could not locate a beta windows 7 driver for the VFO230 model either. If there is a compatible driver for Windows 7 that will work with camera model # VFO230 please let me know which one it is and where I can obtain it.
Please and thank you.

Hello Stoiko,
Thanks for the post. Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here: Good Luck!
HP LJ 1100
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
HP LJ 1100 All-in-One
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Windows 10 Driver for SoundBlaster XFi Elite Pro?

Hi everyone. I'm new to this forum and glade to join it.
My reason to join is I'm asking if there will be a Windows 10 driver for the card Soundblaster XFi Elite Pro?
Thank you for any information.

http://forums.creative.com/showthread.php?t=714135

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

If the site has been optimised for IE (which is non-standards compliant), the best you can try is to spoof IE from Safari.
I'm using an earlier version of Safari than you, so I hope Allan or someone will correct me if the procedure is different.
First, go to Safari Preferences and enable the developer menu;
Then go to the menu and select User Agent - choose a flavour of IE.
Works about 50% of the time.
It won't work if the site is using Activex controls.

Windows 7 driver for 3500 color printer

I need a windows 7 driver for my 3500 color laserjet printer. Windows XP is the latest driver listed on the website.

The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot.
Message Edited by DexterM on 07/10/2009 10:57 AM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
Capture.JPG ‏57 KB

Is there a Windows 8 driver for HP DesignJet 750c?

Similar Messages

Maybe you are looking for