Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Does anyone have a work around for the Akai EIE Pro Audio interface that just stopped working after the mountain lion upgrade. Akai has no response currently.

Yep,
They say they're working on it.
It ***** though
effo

Similar Messages

Does anyone know of a work around for this problem? : iphone 5 will not work on Chryslers uconnect. I found out that they are working on it but have no ETA.   However, they will not help you if your vehicle is older thatn 2008.

Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older.    I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system.   Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email:   [email protected]   or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

Work around for server not found problems on FF36

I have found a work around for all the people having server not found problems with FF36.
If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
Preferred: 8.8.8.8
Alternate: 8.8.4.4
Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.

Well done. Thanks for finding that.
That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
* Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
* https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
* Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows

Any work-around for non-Lion-supported HP LaserJet printer?

I just upgraded to Lion, and while love many of the features (the new mail app is great), I just discovered that my 6-month-old HP LaserJet CP1525nw printer apparently isn't compatible with Lion. Does anyone have any work-arounds for generic drivers that might resolve this. As inexpensive as Lion is, I'd hate to have to buy a new printer just so I can take advantage of Lion funcationality and full iCloud capabilities. Thanks.

In preparing to install the drivers for the CP1510 series, I decided to download and reinstall the package for the CP1520 series. First, I also installed the firmware update, which had been released since I purchased my printer. Then I reinstalled the drivers using System Preferences, etc.
Lo and behold, the printer now works. For some reason, after the upgrade to Lion, the drivers for my CP1525nw stopped working, even though all of my other printers (1610, 2510, 2610, 2605dn) performed just fine without any jiggering after the Lion upgrade.
Curiously, my first attempt to download the software package for the CP1525nw wouldn't download, launching a dialog that says the driver isn't supported for this operating system. The HP website does not include the CP1525nw in the list of supported LaserJets, but elsewhere paradoxically claims all printers supported for Snow Leopard should also run on Lion, which appears to be true for the CP1525nw.
Go figure. Anyway, thanks for the suggestion. It got me headed in the right direction.

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Server 2003 R2 sp2 on IBM T42: is there a work-around for getting bluetooth to work?

I have seen a few forums here and there talking about possible work-arounds for the lack of a bluetooth stack in server 2003, and they have not worked.
The driver here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-50245.html
Installs without compalint, but after reboot, cannot find a bluetooth device. The bluetooth service starts and runs happily.
I found a hack-around solution involving update Q323183 for tricking 2003 into installing a bluetooth stack elsewhere, it also failed to return any results.
Has anyone figured this one out?

welcome to the forum!
i had this working on my T42p back in the day but that was 6 years ago. it installed using the driver from IBM and the MS BT stack. i'm about 95% sure i was using the standard version of 2003 which by default includes a BT stack. enterprise and datacenter do not since there's no logical reason for either one to be running bluetooth due to security risks.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Is there a solution or work around for flash player issues?

Is there a solution, app or work around for flash player issues w/ iPad 2? Maybe even something in development?

Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so you could try checking there for your sites (and there is the built-in YouTube app). But flash itself is unlikely to ever be supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ , and Adobe have failed to create a version of flash that works on iOS
There is a search box on the right-hand side of this page for further info.

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

Work around for radio tuner service not working

A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for Excel's array formulae?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?
I attach an image shot of my Excel spreadsheet which may help:

Hi Rich,
Some made-up dates.
If you have multiple x's in a column, change all but the most recent to "Done" or something other than x This approach looks for the date in Column A that matches a single x in a task column.
This example works on years. I hope you change your oil and filter more often .
One Header Row and four Footer Rows. Enter Years between services (D9) from the keyboard.
To find the date of the last service (the only x in Column D)
D10 contains this formula:
=INDEX($A,MATCH("x",D,0))
You can Fill Right to other columns.
"Years since" (D11) contains this formula:
=YEAR(TODAY())-YEAR(D10)
"Alert" (D12) contains this formula:
=IF(D11>D9,"Hey, You!", "OK")
Conditional Formatting in D12 sets the text to red if it equals "Hey, You!"
It would be best to combine these steps into one complex formula. Numbers is slowed down with each Header or Footer in a Table.
Regards,
Ian.

Work around for Excel "Array Formula" in Numbers?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?

It not clear from your post, but I get the impression you are inquiring about Numbers for OSX. This is the iOS iWork forum. You may want to repost here: https://discussions.apple.com/community/iwork/numbers
If I'm wrong, and you are asking about Numbers for iOS, these links may help: http://help.apple.com/numbers/ipad/2.2/#/tan5ca02385
http://help.apple.com/functions/mac/5.0/
But Numbers for iOS does not fully support conditional text.

Work around for unsupported OS?

I'm rcving a message that InDesign does not support the OS that I'm using, therefore I can't download or use it. Is there a work-around for this problem?

Hi Rachel,
Unfortunately there are no workarounds for the product which isn't supported for an OS.
Check the System requirements here: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-indesign.html
Thanks!
Ankit

Work around for kindle on ipad 1

Restored my ipad 1 and lost kindle access due to update. Is there a work around for this?

Not sure that you fully searched the Amazon Kindle site. They tell you how to download a 5.1.1-compatible version of the Kindle App if you have not previously done so:
Important: iPad, iPhone and iPod touch devices with iOS 6.0 or later are able to download the latest version of the Kindle reading app. If your device is running iOS 5.0 and you previously downloaded the Kindle application using the Apple account that is associated with your device, you will have the option of downloading a version of the Kindle application that is compatible with iOS 5.0. If you've never downloaded the Kindle application using the Apple account that is associated with your device and you want to download a version that is compatible with iOS 5.0, you'll need to first get the latest available version of the application on your Apple account, using the iTunes Store from your computer.
So, download the current Kindle version to iTunes, then, according to this paragraph, you will then have the option of downloading the 5.x compatible version. I would imagine that if you have issues getting the 5.x version after downloading the current version, you can contact Amazon support to get help. They have always been helpful for me.
Cheers,
GB

Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Similar Messages

Maybe you are looking for