Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver d

Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver design view?

Have a look at this thread that should answer your query - http://forums.adobe.com/message/5231996.
Thanks,
Vinayak

Similar Messages

Is there any workaround for exporting 24 bit AAF of OMF in soundtrack?

Hi
Soundtrack pro seems to have only 16bit AAF export function. Is there any workaround to be able to export a multitrack session in higher bit (24bit industry standard) resolution, in AAF or OMF format?
I know Final Cut has 24bit AAF export funcion, but sending clips from soundtrack to Final Cut seems not possible. Only sending mastermixes to FC is possible. But I want to send individual clips to FC.
Or any other suggestions are welcome for solving this problem.
Thanks!
Xske

If Premiere offers you the option to use hardware encoding, then your card is recognized. There is normally nothing more to do. If I understand you correctly, you are concerned that Premiere is not using the card. There are 2 ways to check if it is:
1. Install someting like GPU-Z (google it, it's free) to monitor the GPU. Start to encode something that will actually use CUDA cores, and you should see some activity reported, given as a percentage. Keep in mind that CUDA is only used for some specific tasks (some effects, resizing) when encoding.
2. Export a file that will use CUDA when encoding 2 times, once with hardware encoding enabled, and then with software only. Is there a difference in the time needed to complete the export?

HT2506 Is there a way for the table of contents to display automatically when opening a PDF in Preview?

Anyone know if this is possible?
Thanks!

Try Previews->Preferences->PDF; Show sidebar when opening single file

I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?

I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?

No.
If you don't want to update to the supported software you can't use the device.

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this?

How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this? I need to backup my phone for replacement but it tells me I need 10.1 or later. All software is up to date, Operating system is 10.4.11. Thanks!

No sorry. You need to upgrade to v10.5 Leopard (minimum) in order to sync an iPhone 4.
iPhone minimum requirements:
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later
iTunes Store account
Internet access
You can upgrade to Leopard if your Mac meets v10.5 requirements.
Requirements for Mac OS X v10.5
If your Mac is Intel, you can upgrade directly to Snow Leopard if your Mac meets 10.6 Snow Leopard - Technical Specifications

Is there a workaround for the missing global track chords?

Is there a workaround for the missing global track chords? i.e. will Apple loops follow the chord progression in a track?

I found sort of a work around. I still have Logic Pro 9. It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved. So the information is preserved there just seems no way to create it in X.

Is there a workaround for websites that use "frames" when Safari does not support?

Is there a workaround for a website that requires "frames" when Safari (5.0.6) does not support it?

Has anyone found a work-around for this that works?
No. Any attempt to use an unsupported network device with Time Machine will probably result in data loss, even if it seems to be working at first. If you take data protection seriously, you won't try.
Is it possible to get Time Machine to use SMB to make the backups?
No.

Is there any workaround for log LNs in read-only env. UNEXPECTED_STATE

I'm at 5.0.43 and encounter the same problem mentioned in The Berkeley DB Java Edition Package: BDB JE Library Version 11.2.5.0 (Release 5.0.55) Change Log
Fixed a bug that caused an exception such as the following, when opening an Environment in read-only mode. This occurred under certain circumstances when a clean shutdown (final checkpoint) was not performed when the Environment was last used by a read-write process.
I have below 2 questions:
1) I want to know if there's any workaround to this problem without having to upgrade BDB-JE.
2) Just want to make sure we will not have data compatible issue if we have to upgrade to the latest version
Thanks for your help.

This is a transient problem when opening in read-only mode. It does not cause corruption or a compatibility issue.
If you open the environment read-write and perform a normal shutdown (Environment.close), then it should be possible to open the environment read-only again.
However, it is possible that it could happen again if the read-write process exits without calling Environment.close. The only way to guarantee it won't happen again is to always call Environment.close in the read-write process before opening it read-only, or upgrade to the latest version of JE 5.
--mark

How do I restore my preferred icon for .htm and .html files? search keyword axolotl

When I made Firefox 3.6.2 my default browser, it changed the icons for my .htm & .html files to the fox&globe symbol - how do I change back to my old red dragon symbol? Folder options doesn't work, the icon for the file type changes in folder options, but has no effect on the icon displayed by Windows XP Explorer. Changing registry entries for DefaultIcon from ...\firefox.exe,1 to ....\mozilla.ico also failed, the WxExplorer icons changed to a generic symbol. Thanks, [email protected]
search keyword axolotl

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

Best settings for highest quality for exporting a .mov file to h.264

Hi,
I want to know what the best settings are for the highest quality for exporting a .mov file (720p50) to h.264. I want the same quality as the original.
I want to know the data rate etc.
regards,
Jeroen
Message was edited by: Woudgraaf-AV

There is no way to get the exact same quality when transcoding from an editing source to a highly compressed H.264 QT. However, you can get a real high quality by adjusting the data rate.
However, these things depend on the length of the original. I routinely encode H.264s with good results in the 3000-5000 data rate range. I also make sure that I use multiple pass encoding. Take a short snippet of your project (10 seconds or so), and try various bit rates until you have one you like that doesn't take forever.
Andy

Is there an ap for finding/deleting corrupt files on OS X 10.7?

I seem to have a corrupt file(s) which cause my MacBook Pro to freeze inexplicably (and randomly) upon start-up. I've been told that this is a symptom of having a corrupt file.
Is there an an for finding/deleting corrupt files on OS X 10.7?
I'm pretty much bound to my computer and simply don't have the time to go through it manually.
Thank you.

This is an old post and I am not the person who posted the original query, but I ran your terminal diagnostic and am hoping you are still attending to this forum. I have a mid 2011 macbook Air 11", 256 GB SSD, 1.8 GHz Intel Core i7, 4 GB 1333 MHz DDR3, Mac OS X v. 10.7.5 Lion. I have had various problems in my user homefolder for a while. I have gone through quite a few other troubleshooting and fixing steps, the most extensive following a posting here "Step by Step to fix your mac" by ds store in the Apple forums. These steps helped a lot. I did remove some 3rd party software as part of this process.
My computer is running well in general now, but one thing that has been a recurring problem is problems with move/cut-paste. I researched this online and ACL's being present where they're not supposed to be seems to be an issue. I have used terminal commands to remove ACL's, used Onyx to repair user permissions, rebooted with command-r to reset password screen and reset user permissions. They all help, but then a some point later on the problem recurs. When I run repair disk permissions with either disk utility or onyx I always get this message:
Repairing permissions for “maggieairHD”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
ACL found but not expected on “Users”
Repaired “Users”
Permissions repair complete
This ALWAYS comes up, even if I run it immediately after running it and haven't done anything else on the computer in between.
I created another user and did not have the same problems I was having at the time with some programs, although I haven't used it that much to be able to really compare. The home folder permissions repair in Onyx comes out the same in that user, though.
Here are my results from your diagnostic terminal commands:
Last login: Wed Dec 26 09:36:47 on console
Maggies-MacBook-Air:~ maggieair$ kextstat -kl | awk '!/com\.apple/ {print $6 $7}'
com.rim.driver.BlackBerryUSBDriverInt(0.0.68)
com.logmein.driver.LogMeInSoundDriver(1.0.0)
com.protech.NoSleep(1.3.1)
com.parallels.kext.prl_usb_connect(7.0
com.parallels.kext.prl_hypervisor(7.0
com.parallels.kext.prl_hid_hook(7.0
com.parallels.kext.prl_netbridge(7.0
com.parallels.kext.prl_vnic(7.0
Maggies-MacBook-Air:~ maggieair$ sudo launchctl list | sed 1d | awk '!/0x|com\.apple/ {print $3}'
Password:
com.parallels.vm.prl_naptd
org.x.privileged_startx
org.postfix.master
org.ntp.ntpd
org.cups.cupsd
com.vix.cron
com.sharpcast.xfsmond
com.parallels.desktop.launchdaemon
com.microsoft.office.licensing.helper
com.adobe.fpsaud
Maggies-MacBook-Air:~ maggieair$ launchctl list | sed 1d | awk '!/0x|com\.apple/ {print $3}'
org.x.startx
org.openbsd.ssh-agent
com.parallels.vm.prl_pcproxy
com.parallels.DesktopControlAgent
com.parallels.desktop.client.launch
com.maintain.CocktailSystemEvents
Maggies-MacBook-Air:~ maggieair$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* L*/Fonts 2> /dev/null
/Library/Address Book Plug-Ins:
RCFaxAB.bundle
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AquaticPrime.framework
AudioMixEngine.framework
HPSmartPrint.framework
NyxAudioAnalysis.framework
PluginManager.framework
RIM_VSP.framework
RimBlackBerryUSB.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.maintain.CocktailPurgeInactiveMemory.plist
com.maintain.CocktailSystemEvents.plist
com.parallels.DesktopControlAgent.plist
com.parallels.desktop.launch.plist
com.parallels.vm.prl_pcproxy.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
com.parallels.desktop.launchdaemon.plist
com.sharpcast.xfsmond.plist
/Library/PreferencePanes:
Flash Player.prefPane
JavaControlPanel.prefpane
NoSleep.prefPane
/Library/PrivilegedHelperTools:
Google Drive Icon Helper
com.bresink.system.securityagent3
com.microsoft.office.licensing.helper
/Library/QuickLook:
ParallelsQL.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
MTL.osax
/Library/Services:
AScrEd • New Script for Frontmost Application.workflow
AScrEd • Open Application Scripting Dictionary.workflow
AScrEd • Open Dictionary of Frontmost Application.workflow
AScrEd • Open with AppleScript Editor.workflow
Audio • Encode to iTunes Format.workflow
Browse Movie Library.workflow
Browse Photo Library.workflow
Browse iTunes Library.workflow
Disk Item • Rename Selected Items.workflow
Disk Item • Set Spotlight Comments.workflow
Image • Add Metadata to JPEGs.workflow
Image • Change File Type.workflow
Image • Import into iPhoto.workflow
Image • Print Image Files.workflow
Image • Rotate Clockwise.workflow
Image • Rotate Counter-Clockwise.workflow
Launch Terminal.workflow
PDF • Encrypt File.workflow
PDF • Set Metadata.workflow
Terminal • Get Manual for Command.workflow
Terminal • Insert Current Finder Directory.workflow
Terminal • Insert Selected Finder Items.workflow
UNIX • Apply Command to Selected Items.workflow
UNIX • New Terminal Window to Insertion Location.workflow
iPhoto • Spotlight Search for Detected People.workflow
/Library/StartupItems:
Cocktail
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
.DS_Store
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
CitrixOnlineWebDeploymentPlugin.plugin
Google Earth Web Plug-in.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.7D3946E8-ADA6-4982-87CA-565 69B042BAC.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
Library/Mail/Bundles:
Library/PreferencePanes:
.DS_Store
Archives.prefPane
Library/Services:
.DS_Store
GraphicConverter.service
Sync with MacDropAny.workflow
Maggies-MacBook-Air:~ maggieair$ osascript -e 'tell application "System Events" to get the name of every login item'
NoSleep, iTunesHelper, Caffeine, Dropbox
Maggies-MacBook-Air:~ maggieair$
I have removed NoSleep, Caffeine, itunesHelper and Dropbox from login items before and didn't notice any difference, so I put them back. Some of these I know I don't want, like rim/blackberry, adobe AIR. Skype has never worked consistently on this computer. I don't use most of these Services, and I know I had trouble with some that were not compatible with Lion before. I am not using Parallels much now, have been thinking about taking it off as it uses a chunk of my SSD. But I don't feel confident about getting rid of .frameworks etc safely.
I am glad to remove anything I don't use if I know how to do it safely. I am willing to remove anything I do use if it's necessary, but obviously would prefer to find a way to keep things that I find helpful.
I appreciate any suggestions!

Is there a way to not auto-convert documents to FrameMaker 9 when opening lower version files?

Hi, All!
Is there a way to prevent FrameMaker 9 from automatically converting lower version files to FrameMaker 9 when opening them?
It becomes a problem when I just want to view the files. I have to save each chapter in the book to the lower version file again after viewing for my teammates to use them.
Thanks.

*** haven't checked, because I don't have any pre-9.0 files easily available *** ... but from what I remember, if you're really just viewing the files in 9.0 you should need to save them explicitly back to an earlier version. FM may mark the files as "changed" when it opens them, but that's because it checks things like datestamps and cross-references. If you do not, yourself, explicitly change any content in the file you have opened, you don't need to save the changes; just close the file unsaved. Check my supposition with a couple of files before relying on it! And other people will be able to give you a more detailed explanation of why file you haven't touched yourself still show up as "changed".

JDev team: is there a workaround for bug1482140?

I would like to know if anybody has figured out a workaround for bug 1482140 which is listed in the JDeveloper 3.2.2 readme. It states that it is not possible to deploy EJBs to 8.1.7 running on Solaris. It also indicates that it should have been fixed in 8.1.7.1 but the list of fixed bugs in 8.1.7.1 does not include this one. When is this going to be fixed? Why is there no status on it in Metalink? Is there something clever I can do similar to the workaround given for deploying BC4J?
Thanks for any help,
Matt

Uh, dude? What are you talking about? I've seen the workaround for the aurora_client.jar bit but I thought it only applied to BC4J as it says in the HOWTO under the JDEV docs. As for the 8.1.7.1b patch, this is the first I've heard of it. It doesn't help that searching for this bug under Metalink doesn't produce any results. The way I see it is that I should be able to enter the Bug number in Metalink, and it tells me what patchset the bug is fixed in. That mechanism seems to have broken down here. oh well, I have no problem with having to be told something twice, I'm not perfect. At least I have the stones to post messages with my name and email address Mr d. cheers.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by d:
Matt's been told about both of those options previously and he does not understand !!<HR></BLOCKQUOTE>
null

FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

Hi,
I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
For example, what I'm trying to do is below:
In grid2.column[A], I have the following formula:
grid1.column[A]
The result is an error.
The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
grid1.column[A] - grid2.column[A]
Any help is much appreciated!
Thanks,
Tiffany

Thanks for the detailed response Mike.
The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
Thanks again for your responses. It's very much appreciated.
Tiffany

Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver d

Similar Messages

Maybe you are looking for