Is there a workaround for the thumbnail regeneration issue in CS5?

Hullo.
A friend uses my old version of CS5 and she is stuck with ACR 6.7, because this is the last version available in CS5.
She seems to have huge problems in Bridge with the thumbnail regeneration bug described here, for instance: Cropping to an edge confuses Adobe Bridge?
Concretely, although she has a relatively powerful machine, she is unable to work because there are always tens and tens of thumbnails being generated and her eight virtual cores completely fill the disk bandwidth, making Bridge impossible to use. I am not 100% sure that it is exactly this bug, but everything seems to correspond perfectly well: hundreds of DNG files with lens correction activated and very many cropped manually.
Now, this is a confirmed bug of ACR 6.7 until ACR 8.2. She cannot switch to the latter without purchasing a newer version of Photoshop/Bridge.
Does Adobe provide any fix for this bug in CS5? Could someone kindly point me to it? Her version of Bridge is simply unusable as is....
If the answer above is no, I would be interested to know if this seems legal (not to say ethical...) to anybody: she is (otherwise) pretty happy with CS5 and she would need to buy a new licence for the sole and exclusive reason that the product Adobe sold me has a known and proven bug which makes it virtually useless in her setting.
Thanks,
p.

There are two similar bugs:
The LPC+crop bug started with ACR 6.1 and was fixed in 8.2.
The LPC mystery bug started with ACR 7.3 and was fixed in 8.6.
Both bugs cause repeated thumbnail extractions in Bridge on some images with Lens Profile Corrections enabled.
As you are on ACR 6.7 it can only be the first bug. The only workaround I know is to ensure that the crop does not touch the edge of the corrected image. A few pixels gap will do it. Also, it helps to keep less images in a folder--but this can't be avoided when using Collections or Finds.
I'd imagine that Adobe won't fix CS5 just for this. Presumably there's something in the smallprint which admonishes them from responsibility after the shelf life of the product ends. To be fair, it's not like they fixed it straight away in CS6, unlike the Bridge CS5 database bug (thanks, Adobe). They were only able to reproduce the fault in summer 2013.

Similar Messages

Is there a workaround for the missing global track chords?

Is there a workaround for the missing global track chords? i.e. will Apple loops follow the chord progression in a track?

I found sort of a work around. I still have Logic Pro 9. It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved. So the information is preserved there just seems no way to create it in X.

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Is there a patch for the NTP security issue that does not require Xcode?

Is there a patch for the NTP security issue that does not require Xcode? I have an older Intel mini that can't be upgraded beyond 10.6.8 and I currently don't have room for Xcode 3.2.5. Has somebody trustworthy posted these binaries?

NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
You can also go to System Preferences/Date & Time and deselect Set time Automatically.
Snow Leopard users: Turn off automatic date and time in System Preferences immediately

FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

Hi,
I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
For example, what I'm trying to do is below:
In grid2.column[A], I have the following formula:
grid1.column[A]
The result is an error.
The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
grid1.column[A] - grid2.column[A]
Any help is much appreciated!
Thanks,
Tiffany

Thanks for the detailed response Mike.
The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
Thanks again for your responses. It's very much appreciated.
Tiffany

Is there a workaround for the Safari "clickable hidden content" bug?

Hi,
I'm encountering a bug in Safari where hidden content (non-visible content hidden with the CSS attribute overflow:hidden) to be clickable. I did some googling and found other people who are having this same problem:
http://www.dmxzone.com/forum/go/?35908
http://archivist.incutio.com/viewlist/css-discuss/76660
http://lists.macosforge.org/pipermail/webkit-dev/2005-November/000496.html
But no one seems to have a workaround for this. The last post contains a reply by an Apple developer saying he checked in a bug fix for this, but his reply was posted two years ago and I'm still seeing the problem.
Does anyone know of a workaround for this? Hacks or kludges welcome.
Cheers,
-bri
Message was edited by: omega-

Hi
As Safari uses the WebKit structure, you may find an answer to your question at the FreeNode Network. You may also find help at the WebKit Open Source Project.

This is a workaround for the MBP wireless issue

There have been many topics on the MBP wireless issues already, but I thought some people might find this workaround helpful.
Firstly, my system is a 2.2Ghz MBP, running 10.4.10, and also airport extreme update 2007-04. I am using an airport express base station. My previous Powerbook never had any wireless problems, so I really couldn't blame the basestation for the MBPs poor wireless.
Warning - The workaround requires a little bit of work in the terminal. A little bit of understanding of how networks work is assumed here as well. So it is probably not for everyone ...
What I have observed - whenever the MBP loses connection, the airport basestation IP and MAC addresses are missing from the ARP table.
- To view the ARP table, type (in a terminal window) arp -a.
So, when the MBP wireless hangs, open up the terminal and type that in.
Do a Cntrl-C if the arp command is hanging and not returning anything.
In normal situations, a list of IP addresses and MAC addresses will show up.
As others have already noted, clicking on the airport icon in the menubar, will magically bring the wireless back to life. When this happens, the ARP table also gets magically populated correctly. Coincidence? I think not!
So, the workaround is to store a PERMANENT entry in the ARP table for the airport basestation IP and MAC address. In my case, I can use the Airport Utility software to confirm what the basestation IP and MAC addresses are (note MAC address = Airport ID in Airport Utility). I found the basestation IP=10.0.1.1 and the MAC=0:11:24:07:d7:f
To create a permanent ARP table entry for my airport basestation, I opened up a terminal window, and did the following -
1) login to my administrator account
2) type in the following command sudo arp -s 10.0.1.1 0:11:24:7:d7:f
3) type in my administrator password to authorise the change
4) type in (to confirm the changes have been made) arp -a
5) logout of my administrator account (from the terminal)
Ever since I did this, my MBP wireless performance has been flawless.
Note, if you shutdown or restart your computer, the arp entry disappears. This is ok for me as I hardly ever power down my MBP. As insurance I have added an account startup item to remind me to do the arp table entry.
This workaround is great for me because I don't have a need to use multiple wireless networks. It might not be practical for people who roam around onto different networks.
Give it a go and see if it works for you.
Message was edited by: michael louey

OK, after some further experimenting, I changed the multicast rate on my airport express. It was set at 6Mbps, and I changed it to 2Mbps.
I have read that the default multicast rate for previous 802.11g versions of Airport basestations is actually 2mbps. Excellent results so far !! I have set up a terminal command to continuously ping my airport router address every 15 sec, and there have been virtually no dropped packets so far over many hours.
ping -i 15 10.0.1.1
Interestingly, in Apple's Airport Admin software in my MBP there is no option to set the rate at less than 6Mbps (!!!!), so I had to use the Windows XP version of Airport admin software to make this change using a windows machine. Using the XP software you can set the muticast rate as low as 1Mbps.
If you are using Apples airport admin software (Tiger and Leopard) and you commit any sort of change in settings, the multicast rate will be re-set at a minimum of 6Mbps. My understanding of the multicast rate is that setting it too high is similar to shrinking the coverage area of the basestation, and limiting access only to clients who can transmit at the required multicast rate.
So my new theory is that the dropouts are caused by the MBP dropping off the airport due to not being able to achieve the set multicast rate. (this could be due to factors such as low signal strength, excessive interference or noise).
If you are using Apples more recent Airport admin software, you are having a minimum 6mbps muticast rate set, and this might be too high for your particular environment.
Just a theory.
(oh yeah, I enabled interference robustness on the MBP and the basestation just for good measure)

Is there a workaround for the transform/crop bug?

Happy Tuesday!
Does anyone know a way to get around this bug?
- I have two video clips.
- One video clip (on top) is a talking head that need to be placed in a box on the other clip.
- Apply transform to talking head clip. Scale and change position.
- Apply crop to talking head clip. Bring in left and right so image fits in the box.
Everything is good so far...
- Apply same transform and crop to other talking head clips in same project.
- Crop fails terribly for second and all subsequent attempts. It seems like there is a magic area for which the clip cannot render.
The first transform/crop works fine...
All subsequent transform/crops, either mannually applied or from copied attributes, do this: (The collection of icons are inside the box and is showing through from the bottom clip.)
If I drag the image around the screen, there seems to be a "magic area." If the image is in the magic area, everything is fine. If the image approached any edge of the screen, the bad crop effect happens. Here I have dragged the transform near the bottom left corner of the screen:
I have played with crop settings and the way the crop jumps, there seems to be some kind of logic bug in the cropping code, particularly with transform/crop combinations. Any help would be appreciated! This bug is a show-stopper, and I'm on a fairly tight schedule. Does anyone know of a way to get around this bug?
Tom

I guess, I'm of no help here.. I can crop and transform like crazy - no issues
I also tried your 'special' method, to crop/transform the main storyline (=what I wouldn't do) ... but the attached other clips appear without problems:
and after that 'arrangement', another one - no issues:
tsphillips wrote:
… Perhaps an interesting experiment would be to see what it takes to make a clip render outside of it's crop box.
here you lost me - in translation, sorry:
a clip OUTside its crop??
outside a crop is nothing, that's what a crop is for… shouldn't it?
cropping means; cutting-off parts of the pic, that icon is a passépartout..
so, outside a crop is … nothing to see here, Sir..
Sorry, of being no help here......
Would be interesting, what Cupertino will andswer you..........

Is there any workaround for the brother driver 2.8 update which seems to remove duplexing

It seems the brother printer 2.8 update of 12/14 has removed the ability to print in a duplex mode - i.e. both sides of a sheet. Printing proceeds in the usual fashion and the printer goes through the mechanics to print both sides, but doesn't and outputs the remainder on a second sheet. It is definitely the update as I have another machine which I, thankfully, did not update and that works fine with the same printer.
I tried to go back in Time Machine, but it isn't obvious what to restore and, so far, my attempts to do haven't been successful.

After a bit of experimenting it turns out that somehow the update either defaults to a CUPS definition that causes this weird behavior or the old profile tigether with the update is problematic. It I download the current drivers at Brother and change to Brother HL-5250DN BR-Script 3 all is well.

Is there a fix for the whining MacBook issue?

So, has there been a good and final solution from Apple to the whining MacBook problem? I just received my brothers MacBook as he upgraded to the MBP. It is still under Apple Care so if there is a good solution I would like to send it in to get fixed.
I had never heard of this issue but as soon as I started using it when I got it I heard the whine and couldn't stand it. I did a little research online and most posts I've seen about it are fairly old. I did download QuietMBP which works, though it uses about 8% of the CPU capability which I'm sure drags down my battery life. It does work though, with it running the MB is quiet as my old Ibook was so at least I can happily use it. It just seems like a backwards sort of fix though.

I have the same problem and am trying to find a solution. I have an intel iMac Alum 20" 2.0ghz, 2gigs Ram, Radeon 2400XT, 250 Gig HD. The noise started after about three days of ownership. I have this for almost two weeks now. I cant find any solutions and have talked to Apple over the phone they suggested taking it to an Apple store and let them take a look at it, but I live an hour away from the nearest store, so this is a pain. But yes, the whining is annoying and loud at times. It whines for like 1-2 seconds going from a low pitch to a high pitch in those 2 seconds. It then stops and comes back maybe 20 seconds later. So thats been happening for about a weeek now.
Then all of a sudden early this morning (4AM), while the computer was in sleep mode, I was awakened by that same high pitched sound, but it wouldnt stop, I had to get up and turn the computer off. I would definatley love to get some answers and have this fixed. I've read many posts now with people having similar experiences.
So now this ShhMBP thingy, I wonder if this will work with an iMac. Just want this fixed. Thanks

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

Is there a workaround for Facetime Apr 16th issue than upgrading to latest IOs ??

Hi,
I have IPad2 and I am facing the Facetime issue due to certificate expiry on Apr 16 as reported by Apple.
I dont want to upgrade to latest IOS because I think it would slow down the performance and ruin a good working IPad just to resolve this issue.
Is Apple going to provide some other alternative and/or fix the issue rather than forcing people to upgrade?

Folks choices are to either update or move to a different app such as skype or some other video chat program.

Is there a fix for the "secure download" issue yet??

Hello everybody
I recently talked a colleague into switching from PC. He bought a Macbook and everything has been fine, until recently all his email downloads appear as "secure download". I looked in the forum, noticed some folks appear to have the same problem, but could not find a fix. Can anyone provide some solution???
Thanks

Hello everybody
I recently talked a colleague into switching from PC. He bought a Macbook and everything has been fine, until recently all his email downloads appear as "secure download". I looked in the forum, noticed some folks appear to have the same problem, but could not find a fix. Can anyone provide some solution???
Thanks

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?

I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?

No.
If you don't want to update to the supported software you can't use the device.

Is there a workaround for the thumbnail regeneration issue in CS5?

Similar Messages

Maybe you are looking for