Is there a workaround to using two thunderbolt displays on iMac running bootcamp?

is there a way to get two thunderbolt monitors to work using bootcamp on an iMac? If not, why is it not possible?

Not directly, I recommend contacting Elgato.com and see which of their products suits your needs. Apple doesn't put TV tuners in their computers, that is why you need an Elgato device.

Similar Messages

  • Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

  • To drive a monitor from a Mini, is there an advantage to using the Thunderbolt port versus the HDMI port?

    Is there an advantage to using the Thunderbolt port versus the HDMI port to drive a monitor?
    Can i just plug in my 18" LCD TV to the HDMI port and use it as a monitor?
    Thanks, friends ~

    Thanks, lllaass,
    I have a new Mini arriving tomorrow. It will be replacing my 9 year old iMac.
    I have at my disposal an older VGA monitor and a regular LCD TV with
    an HDMI input. I'm trying to decide which one will work the best for me. If I use the TV, I won't have to buy
    a Thunderbolt to VGA adapter.

  • Two thunderbolt displays.....can I use both of them for audio

    I have two thunderbolt displays and want to run audio through both of their built in speakers?  Is this possible

    Yup yup -- but there's issues..
    See -- https://discussions.apple.com/message/18076926#18076926
    Let me know if you have found other better options! 

  • Is there a switch I can use with thunderbolt display and 2 computers

    I have the new Mac Mini and the new Macbook Air plus the 27 inch thunderbolt display.  The majority of the time, I will be using the thunderbolt display hooked up directly to the Mac Mini.   I have already tested the theory that if I turn off the Mac mini, I can use a separate thunderbolt cable to hook to the port on the back of the display and to the port on the Air and have it show up on the screen.   Many people said this was not possible as the port on the back of the display was only unidirectional and to be used for thunderbolt accessories like hard drives.   It actually works quite well and so at the very least, I can leave the cable plugged into the back of the display and use it with the Mac Air if I turn off the Mac Mini.   At least I don't have to remove the cable from the Mac Mini and move it over to the Mac Air.  I actually looked at the Kanex switch which would do what I wanted it to do, but unfortunately it says it will NOT work with the thunderbolt display.   Apparently it only works with the Cinema display.  Does anyone know if there is a thunderbolt switch out there?
    Thanks

    Thanks, Clinton....that's what I was thinking too.   On the upside, I don't have to remove the actual thunderbolt display cable going to the back of the Mini, I just have to keep a cable in the output port on the back of the display for my Macbook Air.   Then I just turn off the Mini, plug the cable into the Air and I'm ready.   What I find interesting though is that the Kanex "looks" like it will do exactly what I want it to, but apparently it will only work with Mini Display port like that found on the "cinema display".  Maybe one day........     
    Thanks again!

  • How much of the thunderbolt datapipe does two thunderbolt displays use?

    I have a Late 2011 MBP Pro with Two Thunderbolt displays. 
    I want to add a thunderbolt external drive and use it to store paralles images for occassional use. 
    My question is, how much of my thunderport "pipe" is already being consumed by the displays?  I found a video with what appears to be a speedometer type tool, but can't find it for the life of me.
    Thanks!
    http://www.youtube.com/watch?v=pCzPnKl4ebU

    No idea what that 'speedometer' test is - I use the AJA System Test to test my Thunderbolt drives speeds. My config is two LaCie TB 2big drive (one 4 terabyte 'unRAIDed' into 2 2 terabyte drive and one 2 terabyte RAID 0) connected to my 15" late 2011 MBP and then with the Display on the end of the chain (as it should be).
    As I understand it, the more Thunderbolt drives you have, the faster your overall speed (don't ask me why - it's PR put out by LaCie). I don't think that you'd take any kind of hit putting a Thunderbolt drive or drives between your MBP and your two Thunderbolt Displays.
    That's just my understanding...
    Clinton

  • Can I daisy chain two Thunderbolt displays to the new MacBook Airs (July 2011)?

    I have last year's MacBook Air -- probably the best Mac I've ever had and I've had a few. I looked at using multiple displays last year, but the reviews for the major 3rd-party solutions really demonstrate how little is possible.
    I see Apple says you can double up on displays for the MacBook Pro (I have a pre-Thunderbolt one unfortunately), what about the new (July 2011) MacBook Airs?
    Anyone tried? Anyone know?
    (I have a 30" Dell display, but it is, and always has been, very flakey when it comes to connecting to a Mac laptop).

    You can thank Intel for that.
    The sandy bridge chips all have integrated graphics, and before they were released -- they took nvidia to court claiming they didn't have a "license" to make GPU chipsets for the sandy bridge line.  Intel won, and consumers lost.
    The solution most manufacturers are using for notebooks is graphics switching (nvidia optimus like technology) -- which basically uses a discreet GPU along side the intel integrated GPU, and switches between the two instantaenously based on the workload and \ or battery life -- this is how the macbook pro's with the ATI gpus work.
    Since there isn't enough space physically inside a macbook air for a discreet GPU, and since no company in the world is allowed to make a shared GPU for intel's sandy bridge chipsets -- the only solution is to use the integrated graphics that is in the processors -- Intel HD 3000.  Intel basically has the monopoly here...there is no legal solution in the world another company can provide thanks to our wonderful court system
    Wanna know the really sad part about the Intel HD 3000 GPU?  The Nvidia 320M (the GPU used in the previous model 2010 macbook air -- chip was released to the market in April of last year) actually out performs it in some benchmarks -- that's right, a 1+ year old shared gpu from nvidia outperforms Intel's 2011 integrated graphics.
    Intel ***** at graphics, period.
    The only other solution I can think of is for you to get the "Echo Express" product from Sonnet:
    http://www.sonnettech.com/product/thunderbolt/index.html
    It's basically an external bay that will allow you to put a PCIe GPU inside it, and it would then connect via thunderbolt to the macbook air.
    You would then use the minidisplayport connectors on the PCIe GPU to connect to the apple displays -- I believe any modern ATI or Nvidia GPU can support up to 3 or 4 external displays.
    Unfortunately, sonnet's bay is not released yet, and you'd also have to make sure the PCIe GPU you get supports both thunderbolt AND os x....so yeah, kind of slim pickens right now
    EDIT:
    So apparently the macbook pros can daisy chain two thunderbolt displays -- Apple has a picture of it on their site:
    http://storeimages.apple.com/1867/as-images.apple.com/is/image/AppleInc/MC914_AV 7?wid=1200&hei=1200&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0.5,0.5,0, 0&iccEmbed=0&layer=comp
    I just bought a new mac air too...I was gonna get a mbpro but they are just too expensive -- the one I configured was at around 3000$
    Wanna know what's lame about using the thunderbolt display with the mac air?  So the new mac air has the magsafe connector on one side and the thunderbolt connector on the other -- they're not on the same side like the macbook pro is (see picture) -- so basically the cable is going to have to slack around the back of the macbook air -- who designed that?  Must have been smoking some good meth ;p
    Message was edited by: NiqueXyZ

  • If I daisy chain two Thunderbolt Displays to a 2011 iMac 27" can I connect a Wacom Cintiq HD to the other Thunderbolt port?

    In one Thunderbolt port are the two Thunderbolt displays, in another Thunderbolt port is the Cintiq HD. Would this work on an iMac 27".

    Looks like 2 external displays are the max, even for the 2-port (TB) iMac.  So if the Cintiq shows up in ASP and is considered by the computer as a display, then NO, you won't be able to use the Wacom Cintiq in 'addition' to (2) TB displays.
    http://support.apple.com/kb/HT4885

  • Using the thunderbolt display camera

    I have a late 2013 iMac with two thunderbolt displays hooked up.  How do i switch from using the camera on my iMac to using the camera on the Thunderbolt displays?

    Depends on the application using the camera. For example, in Photo Booth, you would select the Camera menu in the menu bar and select the display's camera from the list.

  • Can I use my Thunderbolt Display with my PS3?

    Hi there, I have recently purchased a Thunderbolt Display and I was wondering if I could use it with my PS3. I know I'll need a Mini DisplayPort to HDMI Adapter, but will I need anything else like a converter or can I plug it straight in?
    Thanks

    A Mini DisplayPort to HDMI Adapter can connect a HDMI display to a Thunderbolt port.  It does not work in the other direction.  If the PS3 has no Thunderbolt port, you can't use a Thunderbolt display.  There are no adapters or converters that can help.

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Is there a way to use my external hard drive to run sounds from Mainstage2?

    Is there a way to use my external hard drive to run sounds from Mainstage2?

    TM can back up external HDs. If you have both of your external drives attached, go to the options in TM preferences. Be sure the data drive is not listed (this lists drives/folders to exclude from a backup). Then initiate a TM backup or wait for the hourly backup. That should back up the data drive.
    You can only tell TM what to exclude from a backup, not what to include.

  • Problem with two thunderbolt display's daisychained

    hey,
    i'm having problems with my mac setup. i've got two thunderbolt displays, hooked to a 15" mbp retina laptop.
    i've got my iphone hooked to one of the usb ports of the display then i've got a keyboard, a superdrive and a charger for my magic mouse hooked to the displays as well as a firewire hd. two usb 3 hard drives are hooked directly to the mbp.
    i also changed the audio midi setup to let the audio pla through both of the displays to get a better sound. the mbp is closed so only those two displays get a video signal.
    i have issues when data is transfered along the lines. f.eg my keyboard doesn't work from time to time, my iphone wont be recognized when connected to the dock. not really sure what the problems is a the transfercapacity shouldn't be to it's limit.
    could it be a energy problem? that the displays don't get enough power, my power strip has a voltag controller in it, might that be a problem?
    greets.

    I think Apple should extend the warranty if they have a known manufacturing issue.  I won't be investing another $1000 on a display from Apple ever again.  I can't afford it.  I can by an LG, Viewsonic, Dell, or "fill in the blank" for a fraction of the cost.
    I expect a $1000 display to last me more than 20 months.
    -md

  • Can I run two thunderbolt display monitors off of my new 27" iMac?

    Can I run two thunderbolt display monitors off of my new 27" iMac?

    Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
    For more info, see >  Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself...

  • I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

    I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

    See the following thread on the same topic:
    2 Thunderbolt displays   MBP = sound coming from both displays?

Maybe you are looking for