Is there a zoom SLIDER anywhere in Lightroom 5?

When developing photos, I want to be able to more gradually zoom in and out. Am I missing where there is a zoom SLIDER in Lightroom 5? (The stepped zoom is driving me crazy -- it's not subtle enough!)
Thanks!
C.H.

But it just cycles through the programmed zoom ratios.
True. No smooth zoom function.
But hints-
Use mouse to click on the Navigator panel -"Fit" then a zoom ratio eg. "1:1". Lightroom remembers these "Last TWO" selections and will toggle between them when you click on the image in Loupe view. One click to 1:1, one click back to Fit. The Spacebar will also toggle between these two 'Last used' settings.
I have read that CTRL+[+] or CTRL+[-] will zoom in or out- but it doesn't work at all on my system.
'CTRL+mouse scroll wheel' will zoom, but only cycles through the preset ratios as Jim Hess mentions above.

Similar Messages

Is there a way to create a pan and zoom effect in a lightroom slideshow?

Is there a way to create a pan and zoom effect in a lightroom slideshow?

Nope. Be a great feature. For that I use FotoMagico after exporting JPEG's from LR.

I like the "whites" and "blacks" sliders in lightroom with the option key pressed- is there a corresponding slider in aperture? thank you

i like the "whites" and "blacks" sliders in lightroom with the option key pressed- is there a corresponding slider in aperture? thank you

There's no exact analogue to the "whites" slider in Aperture. But you could do it with curves if you wanted. You can set the white point using the curves tool as well.

Stabilization- Max Zoom slider not showing up.

Hi,
I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.
Thanks!

It took me a while to figure out what's going on. In short, in order to make the stabilizer work, you can only include one squiddily line in each clip.
So when you add the clip to the project, make sure you split each squiddily lines, either in the event library or in the project library. Then you will be able to set the stabilizer max zoom for each clip. If your clip has more than one squiddily lines, the slider in the max zoom will disappear.
You can preview the stabilized result in the event library - by selecting the section that only has 1 squiddily line, and control click, you should see an option "play with stabilization preview".
Hope this helps, my fellow mac users.
-Goya @Rochester

How to download lens profile for Samsung 16-50 mm F3.5-3.6 Power Zoom ED OIS to Lightroom 5.7?

How to download lens profile for Samsung 16-50 mm F3.5-3.6 Power Zoom ED OIS to Lightroom 5.7?
https://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html
In the list, on web-page I can find this lenses (Samsung 16-50 mm F3.5-3.6 Power Zoom ED OIS), but I can't download it, because Adobe Lens Profile Downloader doesn't see this lenses.
Now in my Lightroom 5.7 I have only (for RAW images):
* Samsung 16mm f/2.4 i-Function
Samsung 18-55 f/3.5-5.6 OIS
* Samsung 20mm f/2.8 i-Function
Samsung 30mm f/2
Samsung 50-200mm f/4-5.6 ED OIS
* Samsung 60mm f/2.8 Macro ED OIS SSA
Samsung EX1
Samsung WB2000 / TL350
* - downloaded from Adobe Lens Profile Downloader
How to download profile for Samsung 16-50 mm F3.5-3.6 Power Zoom ED OIS ?

Thank you for your analysis.
In conclusion:
- JPG images are corrected in camera
- SRW images have built profile
- the information in the list https://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html
is little misleading because suggests there is a profile for Samsung 16-50 lenses
I tried to make a 3 profiles in a Adobe Lens Profile Creator 1.0.4 for 16mm, 26mm and 50mm (but it was very amateur work, so I don't guarantee the quality)
Here is a result:
before correction (16mm):
after correction:
Regards

Zoom slider adjust

In the basic library window, the "zoom slider" control seems to have changed its setting.
Previously, I could zoom from very tiny thumbnails up to a single image quite smoothly. Now, however, I can go from about 10 across to 4. Then, even the slightest movement causes the zoom to go to a single image.
There is no way for me to look at 3 or 2 across anymore. Is there an adjustment for the speed at which the slider works? I've tried moving fast and slow, with no change in results.

Paul:
Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that's in your User/Library/Preferences folder. Surprisingly enough a damaged preference file can cause a number of seemingly unrelated issues.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Disappearance of Zoom Slider Bar

When I edit a photo in a separate window, the zoom slider bar does not appear. Instead, in order to zoom in or out, I have to choose from a list of preset zoom values. Has this always been the case with iPhoto or are there workarounds? I prefer to work with the zoom slider bar.
Thanks!

It the same as was in iPhoto 5. Don't remember about the earlier versions. You can edit in the normal window and have a slider bar or use the full screen edit mode. It has a slider bar also.

I have a record player hooked up through the audio port. The input volume is registering high, but there is no output anywhere. Help?

I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input". The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere. Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

keithstopher,
You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
You may want to check into something like the following, there are may out there, see what fits your needs best.
http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
Hope this helps

When I open Firefox it just says firefox on the upper left corner and apperas to be open on the dock but there are no windows anywhere.HELP!!!!!!!!!!!!!!!!!!!!!

One day randomly for no reason whatsoever, I opened up firefox on my mac and it just said firefox on the upper left as if it was open. the little upside down triangle appeared below the icon on the dock, like it was open. However, there are no windows anywhere. I click file and new window and nothing.
I right click the firefox icon on the dock and it says that there windows for example, my home page, but there is NOTHING.
I uninstalled and reinstalled and it keeps doing the same thing.
Your website has NO SUPPORT whatsoever and it has taken me a half hour clicking around to get to this portion where I can write what the issue is and no one will ever probably see this so whats the point. I guess I'm stuck with fucking safari now.
Firefox had been working great up to this point, I literally opened it the other day and this happened just completely random.

Hello,
Sorry you are frustrated. If you have improvements you would like to make, you can file them to the [[Suggestion Box]] and the Firefox logo in the top left with upside down arrow is the Firefox button containing menu items. Try a clean reinstall as instructed below to see if it resolved your issue.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

How can I make a image slider using Dreamweaver? Is there any image slider widget I could use?

I was browsing through the web when I saw a website which had a really cool image slider. I don't have any idea of how to develop anything similar, but I was wondering if maybe dreamweaver had any widget that has already been developed by someone else that is open source for everyone else to use. Is there anything any?

Ken is referring to a "roll your own" slider that works great. There are lots of those.
None of those are built in to Dreamweaver. None of those will give you a panel within Dreamweaver with which you can build them.
Project Seven does sell widgets that are Dreamweaver extensions.
Adobe is offering another one for free (and you get additional function if you buy it).
Extend Studio offers Power Slider (with a free trial).
And there is Nivo Slider.
These are extensions that plug in and extend what Dreamweaver can do.

How to add a navigation Panel and Zoom Slider Bar using Java API

Hello,
I am using Mapviewer Java bean as I have to use Oracle Mapviewer in Java Stanalone application.Please can anyone tell me how to add a Navigation panel and Zoom Slider in Java API. I found the API s for same in Java Script but not in Java.Kindly help.
I am using Oracle Mapviewer 11g.

This is forum sponsored by Adobe make of Acrobat and Reader. Since Chrome and FireFox web browser have chosen to use their own viewer you might get more help in their forums or customer support.

Where is the zoom slider for images in Finder?

Since installing Lion, I have noticed that I can no longer make the thumbnails in a Finder window larger using a zooming slider (as is found in iPhoto). If I remember correctly, when I used to open a folder full of images in thumbnail format, I was able to use a slider at the bottom of the window to enlarge image thumbnails. Is this function no longer available, or am I missing something?

Hi Captfred,
Your answer help me a bit.
However, in SL, I could zoom in the thumbnail / or resize the icon inside the Finder window by 2 finger pinch gesture, just like what we usually do in the Safari window. Now it seems this gesture feature is not avaliable OR we need to do something in the setting in LION OS?
Thank you.
Regards,
peteryung

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Adding sequential numbers to a slide show using Lightroom 4.4?

How do you add sequential numbers to a slide show using Lightroom 4.4? I want images to show sequentially with each having a specific number such as 1 of 25, 2 of 25, 3 of 25 and so on. Please advise.

Sorry, that computer is not connected to the internet right now- husband is using wifi to watch World Cup. Here's a picture from my phone. If it's too hard to read I can take a screen shot in an hour or so.
Thank you both in advance for your help.

Is there a Windows XP version of Lightroom available? Version 4.1 requires W.7.

Is there a Windows XP version of Lightroom available? Version 4.1 requires W.7.

You would need to obtain Photoshop Lightroom 3. Adobe is only offering Lightroom 4 at the moment though.

Is there a zoom SLIDER anywhere in Lightroom 5?

Similar Messages

Maybe you are looking for