Is there an 8.2.1 version for the DSC module?

I just received my service pack, and realized that there is no disk for the DSC module. There are references to version 8.2.1 on this site, but I don't see where I can download it. Shouldn't that have been included with the other CD's?

Hi Brian,
I would recommend that you call your internal sales representative here at National Instruments and discuss this matter with them - as it is not provided for download on our site.
Best regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Similar Messages

Is there a adobe reader XI version for the surface tablet. I recently purchase this to be able to s

is there a adobe reader XI version for the surface tablet. I recently purchase this to be able to sign contract and serfice request on the go without having to print and scan back in documents.

So it seems:
http://forums.adobe.com/community/adobe_reader_forums/metro?view=discussions

Is there a manual I can PRINT for the Airport Utility Software Version 5.5.3 for Windows?

Is there a manual I can print for the Airport Utility Software Version 5.5.3 for Windows?
If there is, I can't seem to find it anywhere (in the Software, by using Google, etc).

I dont' believe there were manuals out there for different versions of the utility. That would be quite a few different manuals.
There are different manuals for the different base stations however...

HT201493 Is there a "Find My Friends" version for Mac Airbook?

Is there a "Find My Friends" version for Mac Airbook?

Welcome to the Apple Support Communities
Find my Friends is only supported on an iPad, iPod touch or iPhone

HT3842 Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

Try This
http://support.apple.com/kb/PH12359

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

Will the be a Skype version for the Kindle?

Will you do a version for the new (or old) kindle device?
Solved!
Go to Solution.

There's a Skype version for the Kindle Fire HD. More information here: https://support.skype.com/en/faq/FA12157/how-do-i-use-skype-on-my-kindle-fire-hd
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

[svn] 2093: fix air-config. xml so that there are no hard-coded values for the build number.

Revision: 2093
Author: [email protected]
Date: 2008-06-16 12:57:18 -0700 (Mon, 16 Jun 2008)
Log Message:
fix air-config.xml so that there are no hard-coded values for the build number. This gets updated from the root build.xml by using a combination of a value from build.properties, release.version, and a value passed into build.xml build.number.
partial fix for sdk-15812
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-15812
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/air-config.xml

I need to add just one more thing and that is on battery life. Last night I sat with the rMBP on my lap installing software, surfing the web, answering emails for close to 4 and 1/2 hours. At the point I took it back to the charger it still was showing a computed battery time remaining of 3.5 hours.
Today I had two VMs open and took the machine of the charger and sat outside with my dogs for about 30 minutes. During this time I was working in both VMs, editing and compiling code. My battery life estimate showed a good solid 4 hours.
This is roughly 6 times greater than what I had with my 2010 MBP and it too had a SSD. I am not sure why but this retina MBP just seems to not work as hard doing anything that caused my 2010 MBP to struggle.
While the battery life is certainly better than I expected it is clear that load can change that very rapidly. So I think I still need to visit clients with an external battery or charger in hand. But I don't think I will be quite so scared that my laptop will simply run out of power before I can even get it plugged in.

Wll there be a flash player download for the ipad 2 at any point?

Wll there be a flash player download for the ipad 2 at any point

While no one can say with absolute certainty, at this time it appears to be highly unlikely that a version of Flash Player will ever appear for iOS. Adobe has said that they've given up work on a version for iOS, so unless they change their minds at some point, and can come up with a version that would meet Apple's criteria for performance, security and stability, then Kappy is correct that no, it won't happen.
Regards.

With Firefox 6, is there any way to allow cookies for the browsing only and then erase cookies when you close the browser?

With Firefox 6, is there any way to allow cookies for the browsing session and then automatically erase cookies when the browser is closed? On older versions this option was available.

For more help, see the '''[[Tabbed browsing]]''' page.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

I have recently updated to ios5 and when restoring apps etc it says my backup needs a password, i password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?

i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
i'm desperately in need as EVERYTHING my life revolvesaround is on there

i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
i'm desperately in need as EVERYTHING my life revolvesaround is on there

Is there an external graphics card available for the Mac Mini?

Is there an external graphics card available for the Mac Mini?

All you have to do is google your question.
http://eshop.macsales.com/shop/Thunderbolt/

Is there an 8.2.1 version for the DSC module?

Similar Messages

Maybe you are looking for