Is there an ability to adjust the IOPS level/range that a storage disk can provide?

O/S - CentOS 6.5
VM type: Extra-small, 768MB RAM
I have an extra 20GB storage disk that was provisioned for a VM to function as a DBDATA disk. Spot testing I can tell this additional storage disk performs much better than the boot disk/drive (~2000 IOPS versus 120 IOPS) where my O/S is installed.
I searched around the portal and dashboard site, but I could not find a dial or slider switch where I could set set/tweak the IOPS settings for the attached storage drive.
Questions
1) Does anyone know if a configurable IOPS setting is available in the portal/dashboard area somewhere?
2) As mentioned, this "additional" storage drive can perform much better than the boot disk (~2000 IOPS compared to ~120 IOPS), is there a reference for what the maximum IOPS are that these storage drives can deliver?

Hi John,
>>1) Does anyone know if a configurable IOPS setting is available in the portal/dashboard area somewhere?
>>2) As mentioned, this "additional" storage drive can perform much better than the boot disk (~2000 IOPS compared to ~120 IOPS), is there a reference for what the maximum IOPS are that these storage drives can deliver?
You could set IOPS on your VM. About this issue, I recommend you watch this video form channel 9 (http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/MDC-B345#fbid=).
You could see the [ 44:40 ]
Storage Quality of Service ( QoS ) .
Enables consistent SLA delivery
Dynamically configurable while VM is running
Set Maximum IOPS Threshold for Overactive / Disruptive VMs
Set Minimum IOPS Alert Threshold
Learn more in
Windows Server 2012 Hyper-V Storage Performance ( MDC-B345 )
Hope this helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Is there a way to adjust the audio level/equalizer on an iphone4/4s or an app that would work better?

Never mind I found it

I don't believe that there's a way to find the peak (or peaks) within FCE. But if the track isn't normalizing then there should be at least one peak somewhere.
However, I have experienced audio anomalies when playing back and when exporting content with four to six audio tracks: at certain moments, the volume rises abruptly, even though such a volume increase is not present in any of the audio tracks. Perhaps FCE is incorrectly "reading" a volume increase at a certain moment, thus interpreting it as a peak, and therefore "deciding" that normalization is not possible.
By the way, my solution for fixing the audio anomaly that I mentioned above was to process my audio in an external editor, as I simply could not get FCE to handle it properly, even after trashing my preferences files, trashing all of my render files, creating a new Sequence and copying my clips to it, etc.

Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously?

Hi Apple community,
This is my first go at this so be kind,
My question concerns launchpad. Coming from Snow Leopard I had been using spaces. I like to keep certain bundles of programs on separate desktops, for example all word processing related tasks in one place. I have set up the equivalent on Yosemite.
My problem is concerns the loss of exposé. Now I know when you swipe into launch pad you get a very similar effect but the issue I am having concerns the "zoom out" effect when you swipe into launchpad. With exposé all open apps/pages etc would be fully exposed - in my case several (sometimes as many as 9 word documents). What I am running into is when I do this in / into launch pad the "pile" of docs is exposed but they are still overlapping so I can't get a good look at which is which and visually identify where I want to navigate to.
My question is this; Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously? If so, instructions on how to do so would be greatly appreciated. Any alternative suggestions to doing this outside of launchpad are also welcome. If there is an exposé app for example, I would be quite willing to go that route.
My main concern is being able to quickly (ie a touchpad gesture) expand all the open pages so I can bounce between them.
Much thanks from a loyal Apple friend.

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Is there a way to adjust the bass and treble on my iMac Power PC sound system?

Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

No, but iTunes has an Equaliser that enables you to do that.

__ Is there a way to adjust the key commands for switching channels in curves?

__ Is there a way to adjust the key commands for switching channels in curves?
By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
Thanks,
Hugh

Hi,
You can find the CS4 plug-in here:
http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
It's inline in tis post with some more background info:
http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
regards,
steve

Is there a way to adjust the intensity of the camera's flash on the iPhone5?

The flash on my iPhone5 is so strong it overexposes the subjects in my photos, especially people. Is there a way to adjust the intensity of the flash?

NO

Is there a way to adjust the sensitivity of the LG Extravert phone keypad?

having trouble with the keypad entering several of the same letters at the same time. Is there a way to adjust the sensitivity?

Hi Whitehouse,
When the physical keys are entering a letter twice, it will definitely be something with the hardware. Can you verify that the keys appearing twice aren't getting stuck when pressed? You should be able to feel the key returning when the pressure of the finger comes off. If they're getting stuck, please check the charging port and headset jack for corrosion and any other damage to the phone. If the phone is under warranty it may require a replacement. Please keep us posted.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Is there a way to adjust the font size in the digital signature?

The attributes, of Name, Date, Location, Reason, Distinguished Name, etc. Is there a way to adjust the size of the font and the display?
Thank you.
Chunkee

Hi Chunkee,
I know it's not what you want to hear, but the answer is no. You can change the font, but not the font size because Acrobat will try to fill the signature field using dynamic sizing. I've found that id the default Helvetica is too big you can experiment with different fonts as they have different proportions and will come out different sizes.
Steve

Is there a way to adjust the thickness of a WebView's scrollbars?

Hello,
Is there a way to adjust the thickness of a WebView's scrollbars?
I tried the solutions mentioned here ScrollPane scrollbar size
But they don't seem to work for WebView scrollbars.
Thanks.

NO

Is there a way to adjust the frame length when using a FFT

Is there a way to adjust the frame length when using a FFT?
Thanks,
David

I thought that to have a longer frame rate you just need to have a longer sample set.

Is there a way to adjust the SIZE of artwork (movies, music, etc) there used to be a "slider"

Is there a way to adjust the SIZE of artowrk (movies, albums, etc)?

.02,
See two views below. Are we talking about the same thing:

Is there a way to adjust the left/right output?

Is there a way to adjust the left/right output on the iPod?
Mine seems to push a little harder on the left side no matter which
ear devices I use. My hearing in my right ear is a little weaker,
so I'm hearing mostly just the left side instead of an equal balance.
My best earphones don't fit the same way when reversed, so they don't
sound anywhere near the way they should. You know the drill-- no
fit, no seal, no bass... no good.
And, yes, I know I can make a crossed connector cable...
Thanks for responding.

using the 30 pin connector means it bypass the volume switch so you can't adjust the volume, see adjust the EQ setting helps. Otherwise you have to add the switch (a pre-amp etc) in between the iPod and your device

Is there a way to adjust the color of the Finders file labels?

is there a way to adjust the color of the Finders file labels?

Apple has never been good with themes or finder preferences or anything like that. From a marketing and business point of view in the past I would guess they think consistency and therefore exerted brand loyalty outweighs customization, and anyone who really wants to get their own experience will be on linux anyways.
Nowadays coverflow, expose, smartfolders, aliases and spotlight reduce the need to differentiate between multiple files on the system by a seperate indicator and a colour.

In garage band lessons the sustain gets more pronounced is there a way to adjust the sustain

In garage band lessons the sustain seems to increase is there a way to adjust the sustain

wswilkinson ... sorry for the slow get back, my dance card has been full.
I've used 3rd party loops or samples. Myself I don't care for them because for me they seem to "lead" me in a direction. The loops direction .... maybe not how I started the song. So I haven't saved many loops into GB. When I did I had just "read how to" . ... then fumbled through it. So I can find those by searching for the names of them.
Even if I haven't saved many I think I understand how GB goes things.... but could be wrong.
GB has dozens & dozens of loops. Broken up in many groups. Country , Rock , World , yada yada .... Lots !! If you hit say "World" you'll find dozens of loops of ALL types. Drums, horns , keyboards , etc. But they are all mixed together.... if you just hit "World". So I have to test drive most sounds to hear what they are if I don't know what they are. GB breaks "World into different sounds too .... Bass , etc if you hit those. How did they get that way is what you want to .... Did GB just do it ?? Heck if I know .... One of the best places on GB info is
http://www.bulletsandbones.com/BBPages/Stuph/MusicianStuph.html so check here and please lets us know what you find out.
My thought is make a folder like I said ... named what you want . "My Loops" ( meaning they didn't come with GB " ) Break everything up into sub folders ... which I guess you may save/add to as you go a long. When you're done add that to GB's loops. Then look to see if "your" loops have been mixed into GB with you "only" adding the "My Loops" folder with it Sub groups .. You can always delete something if it doesn't work as you wish ... "ponder things " and try again.
Never have fear to jack around with things !! It's not screwed your life up yet ... Close GB & DON'T Save It if you're not happy ...
Peace & Good luck

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there an ability to adjust the IOPS level/range that a storage disk can provide?

Similar Messages

Maybe you are looking for