Is there an adapter to connect iPad 4th gen to my older iPod nano 5th gen.
I know there is a lightning to 30 pin adapter but the 30 pin part is a female and I need a 30 pin that is a male so I can plug it "into" my iPod. I have the 30 pin (male) to USB but I can't find a regular USB receptor to lightning either. Please help, I don't want to be forced to buy a new iPod in addition to the new iPad only because of this new lightning connector.
You can buy and download musci, and movies through the iPad. Once you sync to the PC you can sync that same music over to the Nano. But yes you need the Pc as an intermediary. iPads are not PC's they are tablets. They cannot do many things a PC can like trasnfer content to another device such as an iPod Nano.
Similar Messages
-
Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4
iPad (4th gen) Wi-Fi, iOS 6Yes, see my reply to your other post.
-
I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now
Hi there slogrown,
You may need to download these purchases directly to the device. Take a looke at article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
-Griff W. -
No wifi connection on new iPad 4th gen
Help please ive just bought the ipad 4th gen and it wont connect to any wifi networks, im unable to complete the setup because of this. Ive tried different networks and still nothing.I have also tried reseting it but nothing same thing keeps happening, is this common with the new ipads because i have the first one and have never had any trouble connecting to wifi
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting
Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6 (20040201)
AirPrint
PCL (20040201)
PDF (20040201)
PS (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
HeikkiHi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki -
Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple storeI have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.
-
Why my ipad 4th gen doesnt update apps using wifi connection instead works on 3G?
MY ipad 4th gen is updating apps only using 3g connection whereas my wifi is working fine with chrome and other softwares, but it doesnt update softwares using wifi connection whic. Is unlimited data for me.
The WiFi only iPad does not have a GPS chip and does location through WiFi routers. Tethering to your iPhone will allow you to use the GPS chip on it and utilize Apple and Google Maps.
-
I have a ipad 4th gen with the lightning charging port. I have realised how long it takes to charge and the poor battery life which means I can't take my ipad anywhere. Is there a case that is available that will charge my ipad? I know they are out there for older iPads with the 30pin charger but I can't find one for the lighning 8pin charger.
I don't know what you mean by "poor battery life". If your iPad is working properly you should get 9-10 hours of life.
-
Dear All,
My iPad (4th gen) Wi-Fi Serial Number: DM*******184; Problem: can not connect Wi-Fi, just keep connecting...
Appreciate your advice.
Thanks and regards,
Linh Hua
(Vietnam)
<Edited By Host>Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions). -
Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
I have recently got an iPad 4th gen (3 with lightning charger).
Last night I was on youtube watching videos, when suddenly the screen went black.
I plugged it into the wall, pressed the on switch.. it turned on and it was 1%.
So I let it charge overnight (12:45am - 11:30am)
I go down to see it and its STILL on 1%
I use the plug (12WATT) that was provided in the box, and also the cable provided
both seem to be working fine as it says my iPad is charging due to the lightning symbol in the corner next to the percentage..
but my iPad will not budge past 1%
I have tried the power button and home button reset... twice and it hasn't worked either time.
Does anyone have any ideas why?
And what should I do, because I really need to use it..?
Update : I plugged it into my laptop and it now says 'Not Charging' in the top right hand corner?Hi Moll.x,
If you are having difficulties charging your iPad, you may want to follow the directions listed in this article -
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Note that the article title says iPhone & iPod touch but the same steps are relevant to the iPad -
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for using Apple Support Communities.
Best,
Brett L -
Ipad 4th Gen not working at all
Hi
I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciatedHi Try this Connect USB lead to pc hold down power button on iPad connect Lead To iPad still hold button down Wait to see if pc sees iPad keep button down for upto 1 Minute. If that doesn't work make An Appointment at Apple Store. Cheers Brian
-
Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?
You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
Can iPhone 4S and iPad 4th gen exchange files through Bluetooth
I m trying to connect my iPhone 4S with my iPad 4th Gen through Bluetooth , but they won't detect each other. Read a comment by someone in the apple forums that Bluetooth in iPhone and iPad are only for connecting with accessories. Is this true or is there a way to connect the two devices and exchange files
There are a few third-party apps, in the app store, that permit photo sharing by bluettoth & game playing, but that's about it. File transfer, by bluetooth, has never been supported on any iOS device. There are apps that permit such using WiFi though.
-
Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)
I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day - and now all are pretty much worthless with the iPad (4th gen.)
The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
RIDICULOUS!There are only other users here.
Let Apple know by posting at http://www.apple.com/feedback/ipad.html
Maybe you are looking for
-
how do i copy photos still in their events folders from my macbook to my imac? also can i back up my photos still in their events folders to an external hard drive?
-
Facebook chat in OS X Messages shows numbers instead of names
Though I have used Facebook chat in iChat and now OS X's Messages programs for many years now with few issues (some disconnecting issues here and there but that's about it) The past few days I have encountered a problem that I can't figure out how to
-
How to call an ejb method from jsp?
Hi, everyone! Inside my JSP, I4m using scripts in order to show and receive information, that is, a form.But I don4t Know if I can use the same variables from the script in order to call the 'set' methods from my EJB. Could anyone show me an example?
-
Planning Horizon Business Content
Hi, Does anyone know if there is a business content for Planning Horizon for Stock - via transaction MD63/61 ?
-
Unable to Connect After iOS Update
cant connect to wifi since update help please