Is there an add-on to hide certain image results temporarily on Google Image?

I need an add on where I can click certain images to hide them, not all images. Is there any? thank you.

There is Google Safe Search if you would like to modify the search results on a computer. However this one [https://addons.mozilla.org/en-US/firefox/addon/image-block/?src=search] blocks all images in a page when you click it.
This [https://addons.mozilla.org/en-us/firefox/addon/image-blocker-jetpack/ one] blocks images too.

Similar Messages

Is there a method of reporting Adobe Captivate quiz results to a Google form or spread sheet?

I found a widget for this but it has been discontinued. The guide published by Rod Ward lists this capability as "Don't even bother". What is that about?

What do you mean by '...at the end'?
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog
Through twitter I learned that you use CP6 and that you want that message on each question slides during ReviewMode.
In CP6 system variable cpInReviewMode is not yet there. Create a user variable v_review, with a default value of 0. You'll have to toggle it to 1 when in Review Mode. That can be done using the system variable cpQuizInfoAttempts. When comparing its value to the total number of attempts, you know if you'll be getting in Review mode when getting back at the Score slide:
use the On Enter event of the score slide
create this conditional action:IF cpQuizInfoAttempts is equal to n       (where n is the number of attempts you allow in the Quiz Preferences on Quiz Level)
   Assign v_review with 1
Create the text caption or shape with text for each slide and make that text container invisible in output (Properties panel). I will label the text container: Tx_quest1, Tx_quest2.....
Use the On Enter event of each Question slide to trigger this conditional action
IF v_review is equal to 1
    Show Tx_quest1

Colours inverted in certain images

Hi there,
Just now I discovered that certain images on a couple of my sites have inverted colours. This wasn't seen before and nothing was changed (nor the images itself, nor the browser or OS).
I found very little on this searching the internet, so does anybody know what might cause this all of a sudden?
I am using Safari 4.0. Images appear to be good in other browsers.
Thanks!

Hmm, the problem seems to be fixed in Safari 4.0.1.

Is there any way to hide certain artists/albums in my iTunes library from Home Sharing?

Is there any way I can hide some of my music from other people, like my sister, while they are accessing my iTunes library with Home Sharing?
I have a few personal recordings that I don't want anyone but me to have access to.
Is deleting them from my library the only option?

It's not an ideal solution ... but have you considered creating a second library (called, say, "Private Library") containing just the personal recordings?
To create the private library, hold down the shift key while launching iTunes. Click "Create Library" in the dialog that comes up.
Once you've created and opened the "Private library", don't activate home sharing for it. Now go "Edit > Preferences". In the "Advanced" tab, select "Copy files to iTunes media folder when adding to library", as per the following screenshot:
... and click OK.
Now add the personal recordings to the Private Library.
To get back to your original library, quit iTunes. Hold down the Shift key while launching iTunes ... but this time click the "Choose library" button. Browse to the iTunes library file for your original library and doubleclick that. You should now be seeing your original library.
Delete the personal items from your original library.
Now, in order to see those recordings in iTunes, all you have to do is do a "Choose library" when launching iTunes, and open Private library. Because Home sharing isn't activated for Private library, your sister won't be able to access those recordings. (She won't be able to access your original library either, though, when you have Private library running.)

How to hide certain photos in aperture

hello everyone,
i am trying to hide certain photos from my huge library that my clients should not see accidentally for privacy reasons.
some photo-managers offer this ability but in aperture i didn't figure it out how to do it.
i found a workaround on the web, to rate those photos as 'rejected' and to set the filters down a notch to display everything but the 'rejected'.
that kind of works till i quite aperture. after starting aperture up again, the rejected photos show up.
i would have to set up the filters again to hide them.
this is not what i need.
has anybody a better and more reliable idea?
thx

hurgaaA wrote:
i still miss a simple 'hide' button in this application.
and, not everything you wanna hide is because of mummy..
there's something called privacy still and those files i'm talking about can be very innocent, but i wouldn't want to show them to you accidentally.
Unless you allow your clients to freely browse your library it's fairly easy to avoid showing unwanted pictures. The first thing I do before a sitting with a client is use the Favorites function: I select the client's project in the library pane, click the gear icon and choose Add to Favorites. Then I click on the looking glass icon in the search field and select Favorite Items — the client's project becomes the only one visible.
This works for me because I don't use this function for anything else, which means I enable and disable Favorites as needed for this purpose.
But the only reason I do this is to get a cleaner interface during a client sitting. If I didn't all the client would see is the names of my other projects and/or clients. He/she would never see the other pictures unless I selected one of these other projects myself or for some reason decided to browse through all my photos, which I would never do.
You say " i would have to set up the filters again to hide them. this is not what i need."
Filters for albums, folders and projects are sticky and will remain active until you disable or change them. Even between restarts. For instance, I organize my library with yearly folders as the top hierarchy but always add the 3 stars and above filter to those folders. If I click back to the 2007 folder it still has that filter enabled. This ability is extremely powerful, much more than a simple hide function because you can control visibility from a whole range of criteria.
To cut this short: the only time your clients would see photos that don't concern them is if you use the Photos or Projects sections of the library pane when you have someone sitting beside you.
I personally wouldn't do that

In homesharing, I want to hide certain items that I have purchased. Is this possible to do?

I want to do homesharing with my family and friends, but some of the items that I have, I don't want to appear. Is there a way to hid certain songs that I have? Thanks.

you can use e.g. Subler to add an explicit tag to the content, then adjust the parental control preference pane accordingly

Show/Hide certain items in an array of clusters

I am trying to figure out how to programmatically show/hide certain items in a cluster (specifically an array of clusters). I tried a couple of things but nothing worked for me. On a similar note, I would like to be able to programmatically hide certain columns in a table. I can’t figure it out and the postings on the LabVIEW forums here were either not terribly helpful for my situation or maybe I just didn’t understand them. I have attached a vi where I tried to hide items within the array of clusters. Maybe someone could point out why it didn’t work and hopefully they could provide a solution or direction for me to follow. Thanks in advance…
Solved!
Go to Solution.
Attachments:
make column hidden.vi ‏15 KB

Creating a property node directly to the cluster element is far easier. pcardinale essentially shows this.
As for the question regarding the table columns, there is no direct way to hide the table columns, viz-a-viz Excel. The closest you can get is to set the column width to zero, as shown in attached example.
Attachments:
hide table columns.vi ‏13 KB

Is there an add-on to put `close this tab' on the right click drop down?

While I know `close this tab' appears in the dropdown when you click ON the tab (which is sort of ridiculous when you could just click on the tab's `X'), but the same `close this tab' doesn't appear on the dropdown when you right click somewhere in the middle of the window
My question is this : Is there an add-on which puts the phrase where it's really needed - namely when you right click somewhere IN the window, so you don't have to maneuver the mouse to the tab itself or do the keyboard close?
== This happened ==
Every time Firefox opened

Hello Frebe.
There is indeed. Try [https://addons.mozilla.org/en-US/firefox/addon/710/ Menu Editor]. Using it has many advantages, of course, since you can change the place of pretty much everything, and hide menu items and whole menus if you want, but what you'll want to do is to move the "Close this tab" from the one menu to another.
If you need help using the extension (it's not really THAT intuitive), I'll help.

Is there an add-on that will add a tab submenu to each of the windows listed in the "Window" menu?

When several windows are open, it might be difficult to find which one has the tab you are looking for. A submenu that would pop-up when when mousing over the name of individual windows in the "Window" menu would be helpful.
Is there an add-on that would do that?

Try using this extension.
https://addons.mozilla.org/en-US/firefox/addon/custom-geometry/
When you go to set up this extension, you'll have to fiddle with the Options thru the Add-ons Manager tab, and adjust the Width, Height, Left, and Top to suit your needs. ''If you don't have a super huge resolution monitor the default settings in CG will place the Firefox window off the right-side of the screen.''
Once you get those parameters set, move the Toolbar button to a Toolbar. When you hit F11 that window will go into full screen maximized mode, then move the cursor to the top of the screen to reveal the toolbars and hit the Custom Geometry button to restore your custom window size and position. Afterwards that window will snap into place and the toolbars will hide again. ''YMMV''
''Note: Custom Geometry was never [imo] updated properly for Firefox 4 and the toolbar button drop-down menu doesn't work and adds to the width of the toolbar button.''

UWL Hide Certain Tasks

Is there a way to hide certain tasks so they do not display in the UWL. I reviewed the UWL config guide and sap help online but could not find any properties that hides a specific task.
Thanks,
Tom

Hi,
Is it you want to hide certain tasks for certain users?
We can mange this in work item configuration.
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/6e0986d3bb4b05a08196a76c4a575f/frameset.htm
Thanks,
gopal

I have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

Is there an add on to attach a hyperlink to a word or phrase

Say you are making a comment on a web page or blog and want to attach a hyperlink to a word or phrase - is there an add on for Firefox to do this

There might be an add-on for this. You could try searching [https://addons.mozilla.org/firefox/ the Add-ons site].
This is a little more complicated than it may appear, though, because different sites use different mark-up codes for links. For example, this site works similarly to Wikipedia, but most forum sites use BBCode tags. Still others may allow pure HTML. Not sure about blogs (and any comment with a link may be held for moderation as an anti-spam strategy, so keep that in mind).
What probably is simplest, if it's available, is to look for a link button above or next to the form you are commenting in. Then you can paste the URL of the destination page and be assured that the site will handle the formatting details.
Does that help? Are there particular sites where you need this feature?

I want to hide certain pictures in the "Gallery"so only I can see when I want. How can I do this?

I want to hide certain pictures in the "Gallery"so only I can see when I want. How can I do this?

Sometimes depending on the SD card (you set the sd card to be where photos are sent) and then place a security code on the files and photos. I know this can be done on a computer not 100% sure about a cell phone.
Another option is to have the photos sent to Picassa (going to be Google+ shortly) or Photo bucket or other web spots for photos or even Drop Box etc. this way your photos are away from the phone, and only the ones on the phone you don't care about remain on the cell
So I hope it works out ok for you.

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriate for him that I play.

Sorry, but it is not possible to restrict use of specific apps other that the few restrictions provided in the Restrictions settings, not unless the app itself provides some sort of lock. If you don't want your child playing certain games, the only answer is to not load them on the iPad he uses.
Regards.

Is there an add-on program, which assumes the directory structure of a Windows PC with subfolders?

Hi all,
Is there an add-on program, which assumes the directory structure of a Windows PC with subfolders?
So that the playlists are created with all the directories and subdirectories.
I would like the Music folder
and all its subdirectories
drag into iTunes.
Then should the songs in iTunes and in the Iphone geanu be designed with the same directory wiht subdirectories structure.
Example:
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\AlbumArtSmall.jpg
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\Betriebsdirektor - Das Leben Ist Grausam - die Prinzen - 05 - .mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\Blaues Blut - Das Leben Ist Grausam - die Prinzen - 07 - .mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\desktop.ini
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Herbert_Grönemeyer_-_12_[2007]_-brandneu-_[found-on-www-bitreactor-to].to rrent
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 01 - Ein Stück vom Himmel.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 02 - Kopf hoch,tanzen.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 03 - Du bist die.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Hannes Wader\ Dass nichts bleibt wie es war\Rohr im Wind - Dass nichts bleibt wie es war - Hannes Wader - 07.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Hannes Wader\ Dass nichts bleibt wie es war\Schon so lang - Dass nichts bleibt wie es war - Hannes Wader - 02.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\(Everything I Do) I Do It For You - Bryan Adams - Best of Me (Ecopac) - 10.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\(Sittin' on) the dock of the bay - Otis Redding - (Sittin' on) the Dock of the Bay - 01.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\~ Change Is Gonna Come - The Neville Brothers - Yellow Moon - 01.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Baby, Do You Wanna Bump - Daddy Cool - Boney M. - 06.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Barbarella Fortuneteller - Daddy Cool - Boney M. - 15.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Belfast - Daddy Cool - Boney M. - 04.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\AlbumArtSmall.jpg
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Always On My Mind - Definitive Country Album - Elvis Presley - 03.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Burning Love - Definitive Country Album - Elvis Presley - 09.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Don't Cry Daddy - Definitive Country Album - Elvis Presley - 15.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Every Little Thing She Does-Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Folder.jpg
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\goodnight sweethart - flying pickets - flying pickets .mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Groovin'-Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\I Got You Babe - Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classical - Franz Liszt - Liebestraum piano - Franz Liszt - Liebestraum piano.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classical Guitar - Greensleeves - Greensleeves.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classique - Schumann - Carnaval, Chopin - Schumann - Carnaval, Chopin.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Crown Chakra - Tony O'Connor - Tony O'Connor.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Dallas - TV 70's & 80's.mp3
usw.
Is there a program led?
Thank you very much
frank

deggie wrote:
No, as there is no such file management system in iOS.
I do not understand this..
In iTunes I can create folders and subfolders.
Please look.
I would like to drag the folder "1 All" in iTunes.
There should also then the folder structure are taken
iTunes Windows 7 Explorer
Folder in Folder Folder in Folder
Thank you very much
Frank

Is there an add-on to hide certain image results temporarily on Google Image?

Similar Messages

Maybe you are looking for