Is there an Agilent E4443A GPIB driver available?

Hi,
just wondering if someone has seen, or knows where to get a Labview driver for an Agilent PSA [E4443A] please?
Best regards,
Cathal

There's an IVI driver here. For your information, there is the Instrument Driver Network that you can go to and search for drivers.

Similar Messages

Is there noe a windows 7 driver available for the HP 1012 laser printer

I got mine working on windows 7 with the 1015 driver. However it acts a little flaky at times. Mostly I miss two sided copying. Today I suddenly got a message in my action center tha a driver is available. Didn't trust link provided so went to HP page. Cute, they skipped windows 7 but did develop one for windows 8. So much for it is too old to be supported.
Can anyone confirm driver availability?

Hi,
I afraid the printer is not compatible with Windows 7, the same by the way also applicable for Windows 8.
You may find the following chart, any solution is not available for the 1012 model:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=37793...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What to do if there is no Mavericks-compatible driver available for my Canon printer?

I updated to OS X Mavericks recently, and now I cannot print. I tried going to Canon for an updated driver for my MP830 printer. They don't make one and referred me to Apple. So I'm asking Apple to update Mavericks with a fix so that my printer will work. If anyone else has any low-cost (free) solutions, I would appreciate it, because I can't afford to buy a new printer, and I need my printer/scanner to work.

JeanmarieTodd wrote:
I updated to OS X Mavericks recently, and now I cannot print. I tried going to Canon for an updated driver for my MP830 printer. They don't make one and referred me to Apple. So I'm asking Apple to update Mavericks with a fix so that my printer will work. If anyone else has any low-cost (free) solutions, I would appreciate it, because I can't afford to buy a new printer, and I need my printer/scanner to work.
Post in the Product Feedback website. Otherwise, call Canon and ask them if they plan on providing drivers that will work in Maverick.
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other. Apple involvement. Apple may respond to questions but does not formally provide technical support on the Site. Any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.

"No CD/DVD drive Available"

My luck with Elements has been down right rotten here lately ! I have been having trouble re-sizing pictures and now that I've just about got that figured out and I'm ready to burn them to a DVD I get a message telling me that there is "No CD/DVD Drive Available" !
Ok,no need for me to beat around the bush I have no idea what this means....I mean..... I do know that I have burned videos onto DVD's and made many music CD's on my laptop in the past with no problem,but I have never even attempted to burn any photos . So.... is this telling me that I need some special Driver in order to burn photos to a DVD ? Thanks again for sharing your knowledge ! You folks have been a huge help in my PSE education !

Here's some additional info about trying to solve your problems. In some cases CD burning problems can be caused by "filters", which are located in the Windows system registry. Here's a page with this information; http://www.techspot.com/vb/topic137666.html#post815753 as well as additional links for reference. Problems caused by registry filters normally cause system wide trouble with the optical drives, so I'm providing this for general knowledge as much as a solution.
PSE links to system functions by files called "dll (s)" (dynamic library links), they can be damaged or corrupted in various ways. There isn't much sense in trying to repair the PSE installation via these files. There are too many, and I can't tell you with which one the problem might exist.
Since you say that PSE has been giving you headaches in general recently, it might be time to try a reinstall of the program.
An un/reinstall may solve your problems, and won't damage or lose any of your catalog information. With that said, before you begin, write your tags and metadata info to the pictures. That file path is "File" (top menu bar) > "Write keyword tag and properties info to photos". If you haven't done this already, it's best to apply the data by selecting groups of photos rather than selecting all the photos at once. Too many photos selected at once might possibly crash the program, and in smaller groups you have the reassurance that the task has been accomplished.
If you decide to attempt a reinstall, completely disable your anti virus program before you begin.
I should add that sometimes malware infections can cause random problems with existing software. In an effort to be thorough, it might be prudent to do some scans with your security software before you begin. It can't hurt. Mr. John Ellis has stated that Norton security products in particular can have some adverse effects on a PSE installation. (At least I hope I've quoted him correctly).
Feel free to post back or begin a new thread, if you need any more info or assistance.

Agilent 6632A GPIB dc power supply, 0-20 Vdc Instrument Driver

Hi, does anyone here has a Agilent 6632A GPIB dc power supply, 0-20 Vdc Instrument Driver???
Thank you.

It's available on NI Home > NI Developer Zone > Instrument Driver Network and search for 6632A.
Or, see attached.Message Edited by TotalAJ on 06-22-2005 07:33 AM
Attachments:
hp6xxxa.zip ‏47 KB

HT1338 I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

Did you try the driver from this Epson page: Epson Perfection 4490 Photo, Drivers & Downloads - Technical Support - Epson America, Inc.
OT

Is there driver available for Yokogawa 2423 thermometer?

Is there Labview driver available for Yokogawa 2423 Portable Multi Thermometer? Or can I use some other device driver for same purpose? This device is quite old, from late 80's. I would still like to use it with WinXP, Labview 7.1 and rs-232 connection.

You can search for LabVIEW instrument drivers at the ni.com/idnet Instrument Driver Network. The site has over 3000 instrument drivers and several other resources if you can't find exactly what you are looking for. For instance, you can make a request for a particular instrument driver, or you can view tools on how to create your own.
I did a quick search for your instrument, but I couldn't find the exact model. However, you may be able to download similar ones from the site that you can modify for your purposes.

Is there an external hard drive available for Lion?

Is there an external hard drive available for Mac OS X v10.7?

How big of a drive do you want? Western Digital USB MyPassport drives work great and are inexpensive. You can buy them Mac formatted or just buy one that isn't and use Disk Utilities to format it for a Mac. As far as I know any of the external drives will work with OS X Lion.
I use a 500GB MyPassport. My MacBook Pro mid-2010 has a 320GB drive and i'm using less than 60GB so the 500GB external is plenty for my back up needs. I use it with Time Machine and SuperDuper! (for bootable images) in Lion.

I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
Hope this helps.

Are there any more iMacs with optical drives available in Apple stores?

I want a computer that I can use DVDs with. I have many and often order them so I will need to have an optical drive. I don't want something that is not built in. Are there any new left over inventory available of iMacs that previously had this feature?

These > Refurbished iMac - Apple Store (U.S.) both have SuperDrives and carry the same warranty as a new iMac.

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini?

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini? Since this is the slowest component of the whole system is there a way to upgrade to something faster (possibly a 7200RPM drive)?
thanks,
Jeff

Ways to make it faster:
1) Be sure you aren't running any Rosetta apps or drivers. Watch out for print drivers. You can use Utilities > Activity Monitor to spot the legacy stuff that uses Rosetta. (Make sure the pop-down menu at the top of the Activity Monitor window says "All Processes", not just "My processes".)
2) Max your RAM to 2 Gigs. You can't go to 3 Gigs since you only have the CoreDuo CPU.
3) Whatever hard drive you use, keep at least one-third of it empty. Obviously this will be easier with a large external firewire drive.
4) 3.5 inch drives will be faster than 2.5 inch drives -- even at the same RPM. So again, external will be the way to go, since Minis can only take 2.5 inch internals.
If you want an external that stacks under the Mini, some examples are here:
http://www.123macmini.com/accessories/guide/enclosures.html
(The NewerTech and WiebeTech models appear to have good reputations, though I have no personal experience with them.)
But again, all of the factors I mention above will affect performance.

I also have a GPIB-SCSI-A box that I would like to run under Win98SE. Is there even an UNSUPPORTED DRIVER that we could use?

A response to another similar question indicates that NI does not have a "supported" driver for the GPIB-SCSI-A box under Win2000, etc. It does not indicate whether there might be an unsupported driver we can use. Something is better than nothing....

Hello-
I'm not aware of any "unsupported drivers". However, http://www.ni.com/pdf/manuals/320427.pdf gives instructions on how to use this box. It might be possible to write a driver. However, this driver will not have a VISA passport, so most instrument drivers (ni.com/idnet) are useless. It's probably best to invest in a different controller.
Randy Solomonson
Application Engineer
National Instruments

Is there anyway to reset the GPIB driver during program execution?

Is there anyway to reset the GPIB driver during program execution?

The issue at hand is that a thread is executing a series of tests which may or may not be making GPIB calls at any given time. The thread may be killed at any time with the function CmtTerminateThreadPoolThread (due to the user pressing the stop button on the GUI). Cooperative thread termination is not an option since a test may cause the thread of execution to lock up the system. The problem is that there may be outstanding GPIB calls at the time that the thread is stopped. These calls time out and generate run-time errors usually via the GPIB function ibrd. The motivation is to completely stop the GPIB driver while the thread is being killed, after which it can be re-initialized. Ideally.

GPIB instruments connected through Agilent USB/GPIB Interface can bee seen in MAX but can't communicate in labview

I have an Agilent 82357B USB/GPIB Interface connected to my computer.
Attached to that, I have two lock-in amplifiers (an SR830, and an SR
850). I would like to be able to communicate with them through GPIB.
I have downloaded and installed the software for the Agilent device
(Agilent IO Control), and I can see the interface and the two devices
in that software. Here's what is configured in this software, that I
can see:
The VISA interface ID is GPIB0, and its address is 0
The VISA addresses of the devices are GPIB0::4::INSTR and GPIB::12::INSTR, and the GPIB addresses are 4 and 12
In Measerment and Automation Explorer (MAX), I made sure that the
Passport for Tulip box was checked. Once it was, I could see the
devices in the Configuration window under Devices and Interfaces ->
Miscellaneous VISA Resources. There, I see GPIB0::INTFC, GPIB0::4::INSTR and GPIB::12::INSTR.
I can right click on either of the instruments, and "Open VISA Test
Panel" where I am successfully able to send commands and read from both
devices.
HOWEVER, when I am running an actual LabView program, I am unable to communicate with the devices.
For example, when I try to communicate to the devices through VISA,
using the 'Basic Serial Write and Read.vi' (while VISA Resource Name is
GPIB0::12::INSTR), I get an error:
Error -1073807331 occurred at Property Node (arg 2) in VISA Configure Serial Port (Instr).vi->Basic Serial Write and Read.vi
Possible reason(s):
VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by the referenced resource.
When trying to communicate with them through GPIB (which is what I want
to do in the end), using 'GPIB.vi' I also get an error. Here, GPIB
address is 12, and I am just trying to give it the command *IDN?
GPIB Write returned error code:
EDVR: Error connecting to driver or device
What's going on?

You can use VISA Write and VISA Read. You just can't use the example called Basic Serial Write and Read because that is specifically for the RS-232 port. The GPIB-VISA is one of the shipping examples. Start the example finder and go to the search tab. Search for VISA.
Again, no you cannot use the GPIB functions with a non-NI controller. The low level functions for an NI board and an Agilent one are completely different. You can rewrite the driver to use VISA or you can rewrite it to use the low level functions that Agilent provides. You use the Call Library Function Node, I believe to access their GPIB driver.
I hate to say it but the $20 difference between the Agilent and the NI controller does not seem like much of a saving.

HP8563E Spectrum gpib driver for labwindows/dos

Hi
I'm looking for HP8563E Spectrum gpib driver for labwindows/dos.
Best regards

I don't know of a driver, but you can download from agilent their Spectrum Analyzer compatability guide which cross references their analyzer's GPIB commands and create your own driver. It contains compatable commands for 8563 among others.
http://www.tm.agilent.com/classes/MasterServlet?view=faq&faq-ItemID=1000003541&language=eng&locale=US
I still use the 488.2 board (successfully with WINNT, ME with patch, 95) and don't use instrument drivers, just include the NIGLOBAL.bas and the GBPI32.bas and import them into either a VB project or MS Excel. From what I've seen there are only two basic types of instrument commands, settings and queries (both text), so I don't use a pre-compiled driver. Also been successful at using Microsoft's Winsock ActiveX control for real
-time display re-creation of an Advantest SA display over the internet. Hope this might help.

Is there an Agilent E4443A GPIB driver available?

Similar Messages

Maybe you are looking for