Is there an Apple USB Modem driver for Win7?

Does anybody have any ideas?

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

Similar Messages

Apple USB Modem driver for Windows 7?

I installed Windows 7 on the boot camp partition. After running Boot Camp software update 3.2, all the windows drivers loaded except for the Apple USB modem. Does boot camp v3.2 support the Apple USB modem in windows 7?

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

Apple USB CDC Driver for 10.9?

Does Apple have an updated USB CDC driver for 10.9? The package for 10.8, AppleUSBCDCDriver-4.1.24.pkg, doesn't seem to function on 10.9.

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

Apple USB Modem - Dial Up

Hello hello. I'm new to boot camp as well as mac. Anyway, I'm trying to make my windows run on Dial Up, but when I connect my Apple USB Modem, it detects it, but it doesn't install it, saying I should go online and check (not that I can since dial up is my only source of internet...). I set up my dial up connection, hoping it would work, but when trying to launch it, it shows me the properties saying something involving the modem in COM1 not existing. Any ideas?

Danny:
I did some research and I ran into the FAQ below and it appears that Apple does not provide a USB Modem driver for Windows. We really need to hear from someone who has actually found the driver and is using this modem with Windows.
*Frequently asked questions: Drivers, Macintosh features within Microsoft Windows, other
_Which drivers are included on the Mac OS X 10.5 (Leopard) DVD?_
The Mac OS X 10.5 (Leopard) DVD contains the following Macintosh drivers for Windows:
Apple Bluetooth
Apple Keyboard Support
Apple Remote Driver
Apple Trackpad
Atheros 802.11 Wireless
ATI Graphics
Boot Camp Control panel for Microsoft Windows
Boot Camp System Task Notification item (System Tray)
Broadcom Wireless
Intel Chipset Software
Intel Integrated Graphics
iSight Camera
Marvel Yukon Ethernet
nVidia Graphics
Realtek Audio
SigmaTel Audio
Startup Disk Control panel for Microsoft Windows*
Also found this:
*Does the Apple USB modem work on Windows machines?
The Apple USB Modem is not supported on computers running any version of the Microsoft Windows operating system.*
Axel F.

Apple USB Modem no good in UK?

I have just bought two Apple USB Modems, one for my occasional travel use, and one for a friend to use in a country cottage for email send.
Neither of them detect a carrier on a solid BT line in London UK. They can't both be faulty, am I doing something really dim. Settings in Network seem in order.
Checked both Modems on iMac C2D, Macbook CD and C2D same result on all.
Phone line and cabling healthy, double checked with handset at modem plug sounding healthy and loud.
Any thoughts?

Oh dear oh dear.
How can two - 2! BT431a to RJ11 cables work perfectly with a telephone, but not the Modem?
A third very nasty looking cable from the bottom of the drawer is working perfectly and both modems are now going fine, and rather well for dial up.
Very sorry all, too hasty to post. Am writing a hundred lines "Always check the very obvious".

Apple USB Modem is not working (Snow Leopard)

Hi,
I'm despered, because I'm looking for the answer for over a week.
I just bought an Apple USB Modem (this for telephone line 56k), but
it's not working with my computer (zero response, I cannot find it in
System Preference => Network)
As far as I noticed, everything with modem is ok, because when I
plugged it to regular PC it's responding.
Help...
ps. sorry for my gramma...I'm not native english
Icon

There are users with USB modems and they seem to have got them to work. have a look at this thread:-
http://discussions.apple.com/thread.jspa?threadID=2130862&tstart=0
regards

Apple USB modem packaging says for PowerPC G4

I have just recived an Apple USB modem (MA034Z/A) to use with my MacBook Pro.
I am a bit surprised that the packaging says for "PowerPC G4 or later". Being a bit pedantic, this is ambiguous, but since there only seems to be one type and lots of mentions on this forum, I guess it is compatible with Intel macs.
Any comment?
Thanks
Mike

It's a USB modem. It can be used on any computer with a USB port that supports USB 2.0.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

Apple USB Modem 56K

Hello Friends
Now 2 days ago the update of Snow Leopard 10.6.3 released, but once again WITHOUT a 64-bit drivers for the original Apple USB 56K Modem. Can anyone say whether there's what is planned? I have often professionally faxes by modem to send and receive.
With the 32-bit mode of the 10.6.3 is the USB modem without any problems. But since I mainly use the 64 bit mode, which is effective, it would be nice here can also send faxes using the USB modem.
Someone has a tip, whether it alternetaiven a driver (kext) for the USB modem for 64-bit there?
Thanks Info for this.
Fritz122

Hi there, I jut bought an Apple USB modem on eBay bnib. It works intermittently with my Snow Leopard Server, Mac Mini. I just get the first inch of the received fax. This is painful as it is such a simple and normal solution for a small business sever.
I spoke to AppleCare who were unaware on any issues. I sent the modem back for a replacement and have the same problem.
What do I do? Buy a Zoom Model 3095 V.92 USB Mini External Modem, trail a wire across my studio to an HP Fax Printer.
Come on Apple, please fix this.
Drew

Apple USB modem disconnects after a few hours??

I bought an imac G5 -- it came without a modem. (After a false start), we bought the Apple USB modem. Now we want to upgrade the operating system, either with Safari or with "Software Update". It tells us we need Mac OS X Update to 10.4.3, and it is 97.0 MB.
We have a fairly slow dial-up connection -- always have, so we usually download large files like these overnight. But our Apple USB Modem won't let us - perhaps it is too unstable. After 6 or 7 hours we get disconnected. (It says we need 8 or 9 hours to download the file). Our main problem is that we can't stay connected for more than 7 hours.
I've made sure under the Network Preferences, for external modem, the Prompt every xx minutes to maintain connection, and Disconnect if idle for xx minutes, are both unchecked. I've turned off the screensaver. I make sure I move the mouse and a window every hour or so. I've phoned my ISP, and they deny a time-limit. I've tried not breating heavy near the computer.
What else can I do? I've always been able to stay on line over-night for download with my old computer/modem, but not with this one. I've tied at least 4 times. Is there something wrong with the Apple USB Modem?
Also, when I tried with Safari, and the modem disconnects, I thought I could just re-log on and start downloading where I left off -- but no. Every time I click the "resume downloading" circle next to the update in the download window, it starts from the beginning. -- it doesn't resume where it left off!
That is the most frustrating part about this -- I've downloaded the first half of the file a half-dozen times, and no matter if I use Safari or Software Update, I can't get the computer to remember the hours of work it just did and simply continue downloading from where it left off. If I could just solve that issue, I could get the system update downloaded.
If we don't solve this, we will never be able update any apple software with large files. Thanks for your help.
Francis

it's a 3.5 hour round trip to the closest Mac store.
I just want my modem to work right -- the first time. Actually, this is the third modem I've bought (all on-line since I have no mac store close). The first USB modem didn't have a mac driver. The next bluetooth modem said it was mac compatable, but when it arrived, it was only capatable with os9. So I get a modem right from Apple, and darn, I just want it all to work now. I'm tired of foolin around. Why wasn't there an internal modem anyway?
My old modems and macs could download overnight. All I want is for it to be as good as the old stuff.

Apple USB modem won't answer

I'm using an Apple USB modem with my Intel Mac Pro (Tiger). It used to work fine, but now it won't receive faxes! When I call the number, the menu bar on top of the screen says "Ringing..." and even though I have the thing set to answer in 2 rings, it never does - just keeps saying ringing and never picks up. Is there a way to fix this or a better way to add a fax modem to my Mac?
Mike

I'm not certain, but I thought I read that some all in ones can dowload the Fax to the Mac!?
Tough to tell if it's the Modem or some OS problem, you could try a new User for one as a test. Might try the Modem on another Mac, or at an Apple Store, it seems that if it's ringing I can't picture why it would be faulty, but maybe.
Geez, I have so many old Serial Modems haven't looked, but I think this one would work with a USB->Serial converter...
http://computers.pricegrabber.com/modems/m/615484/details/st=product_tab/
Geez, just switched to a new Boot drive and my Serial converters aren't showing up to test... grrr, but I have in the past used them to Modems, not certain I faxed to from them though.
Found this interesting FAX Application while researching...
http://www.macadvocacy.com/faxcenter.htm
Then there's online faxing services too...
http://tinyurl.com/dla4zz

Problem on sending fax with Apple USB modem

Hello everyone,
I use my macmini to manage faxes to help my father's business, as fax is one of the most important mean of communication to our clients. While I can only receive fax from outside to my mac, but I cannot send fax from my mac through "Send PDF" option, it just stop working, and "Waiting for modem to become available" without using my telephone-line. It is weird when I plug it into my macbook that it works.
Look forward to your advice. Thank you,
Victor Tang
Message was edited by: victan7300

I am having problems sending and receiving faxes, too, and have been working with AppleCare level 2. They are off for a couple of days, and the solution is nowhere in sight. They did capture information from my system as I tried to fax, and sent it to engineering. They have determined that I am not getting a dial tone.
When I connect my phone to the jack, I do get a dial tone and can talk on the phone (which I do frequently). I have been provided with two additional new Apple USB modems to try to see if that would fix the problem. It did not make any difference which of the three modems I use, I cannot send or receive faxes. Yesterday, I booted up my old iMac (OS X 10.4.11 with a collapsing hard drive, but an internal modem). I attached this computer to the same phone jack and was able to freely send faxes - every single try.
I downloaded and set up the application PageSender just to see if it was the fax software (I have been trying to just use what came with my MacBook Pro). Using the Apple USB external modem (as I have had to do with this computer and operating system), I could not send any faxes - could not get a dial tone, according to PageSender.
I, therefore, believe that the problem is with the external modem and/or the extensions that operate the external modem.
I did try what you have suggested above - the substitution of the IOSerialFamily.kext:
I partitioned my harddrive into two partitions HD and HD_2. I loaded OS X 10.5.5 (from my CD) onto the second partition. I then copied the IOSerialFamily.kext on my thumb drive (from OS X 10.5.5 the version was 92). Then I upgraded to 10.5.6, and copied the ioSerialFamily.kext on my thumb drive - this time with 10.5.6 the version was 93. I went back to my first partition where I have 10.5.7 (version 94) and tried to transfer version 93 IOSerialFamily.kext to the extensions. As soon as I tried to mount the Apple USB modem I received the following message:
"System extension cannot be used
The system extension”/system/Library/Estensions/IOSerialFamily.kext/contents/PlugIns/Motor olaSM56KUSB.kext was installed improperly and cannot be used. Please try reinstalling it or contact the product’s vendor for an update."
At that point I tried to exchange the version 93 with the one that I removed - version 94, but I continued to get the same message. I decided to reinstall 10.5.7 again hoping that this would solve the message problem. No such luck! I did now have version 94, but the same error message. At this point, I tried a permissions repair. This solved the error problem... but I was still not able to send or receive faxes, because the fax programs could detect not dial tone.
Because I have never sent or received faxes with this computer - only my iBook (10.4.11), I decided to go back to the second partition on my computer and see if I could send a fax from the macBook Pro with 10.5.6. The results are sporadic. I had to try several times, and occasionally I would get a dial tone and could send the fax, but more often, I could not. There was no difference in any of the 2 modems I tried (by now I had returned 1 to the Apple Store), or whether I used the front USB port or the rear USB port. The sending of a fax with MacBook Pro and 10.5.6 was not consistent or reliable and I could only occasionally get a dial tone... with 10.5.7 I can never get a dial tone.
According to my AppleCare representative the engineers are "on this". But I see that the original post was in November, which was prior to 10.5.7; I purchased my MacBook Pro with 10.5.5 in December, so imagine that this problem has been around through several upgrades of 10.5.
This is unbelievably frustrating! Has anyone been able to easily send and receive faxes with 10.5.5?
Chris (hopefully you are still around), did you get any error messages when you exchanged your 10.5.6 IOSerialFamily.kext for the 10.5.7 IOSerialFamily.kext - especially when you mounted- or tried to attach the external modem? If so, how did you handle that?
Sorry that this has been such a long post. I have tried to provide as much information as I could in the hopes of finding a solution. Any ideas???
THANKS!

Apple USB Modem+WinXP SP3 Failure. Help?

I have installed a fresh Windows XP SP3 (via a full SP3 install CD) onto a Macbook Pro Unibody 2.8Ghz. Everything seems to work amazingly except for when I go to use the Apple USB Modem, my only means of accessing the internet currently.
When I attempt to dial out from Windows, the modem sound coming through the speakers seems to be scratchy, and to drop in and out. When the host computer responds, instead of the normal sequence of harsh sounds, there is a new, horrible, mangled array of bizarre sounds I have never heard emit from modems. It is such that I was sure either my telephone line or modem had suddenly failed... That is until I booted back into OS X and found the modem to work just fine again.
I have tried lowering port speed as low as 9600, and turning off a port buffer. Neither made any difference. I have also used Hyperterminal to do a soft modem reset and then to manually dial out with it, and it behaves the same. I thought perhaps the dial-up program was entering some command codes to the modem that was changing its protocols, but resetting and dialing out in Hyperterminal indicates that is not where the problem lies.
I googled around and found some reports of past Apple USB Modem issues that were resolved with Boot Camp Beta 1.1.2. But here I am with Boot Camp 2.0 so I don't know why I'm having this problem or what could be done about it.
Thanks for any help!

I managed to get mine to connect once at 56k and once at 33k, but as you said it just drops very quickly. I think this is a driver issue, but I don't know why it works for some and not others. Apple seems to think the driver they supply with Boot Camp works with it or they wouldn't provide it. An Apple document from an older Boot Camp version (1.1.2 I think) says they now fixed it to work with the Apple Modem, but here I am with Boot Camp 2.1 and it's not working.
I read a bit about the modem itself, and it seems that the Apple USB Modem is actually a Motorola SM56. The "SM" stands for "soft modem". What it turns out this means is that the majority of the actual "modem" is a software program, and there is very little actual "hardware" involved. Perhaps this explains why with Windows/Boot Camp it sounds as if the modem is having a terrible hardware failure, whereas it is perfectly fine in OS X Leopard.
It would be nice to hear some more reports that this isn't working for anyone, or if there is a fix or.. Well any additional information would be nice.
That's about all I "know" at this stage.

Apple USB modem stopped recognising dial tone

Running Snow Leopard (10.6.8) on a 2007 iMac. Have been using an Apple USB modem for the last several years, and as recently as last week successfully sent out a fax, but suddenly today it does not detect the dial tone (although I can hear it), and hangs up after just 2 seconds. It detects and receives incoming faxes. Is there any way to dig into the preferences to set a longer wait? The system preferences panel for print/fax shows no option for 'wait for dialtone'. Or do I need to reinstall the driver? And if so, where can I download the driver?

I have exactly the same problem with my Apple external USB modem right down to it showing up in the Profiler. It complains if I unplug it while it's supposedly faxing something. It worked until April 30th, but it hasn't worked since then. However, I don't recall installing any new drivers that would have caused this problem. Even stranger, the modem still works with my old PowerBook G4 which is also running OS X 10.5.7.
KLM

CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

Hello,
i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

Hi there ulairi9!
I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
http://support.apple.com/kb/TS3271
Thanks for using the Apple Support Communities!
Cheers,
Braden

Is there an Apple USB Modem driver for Win7?

Similar Messages

Maybe you are looking for