Is there an easy way to know which app(s) are causing spike in Data Usage?

I have an iphone 4, but son and daughter have iphone 5s and my wife a lumina. We all spiked in data usage last month, how do we determine what caused this? Was it Facebook or Pandora? Some other app? There must be an easy way to find out. Please advise. Thanks!

GV2,
I'm glad Mrhelper was able to shed some light on this for you! In iPhones, the amount of data you're seeing under each app is for the "Current Period." Just above that list you'll see info about the Current Period and Current Period Roaming. This is just an overall snapshot of total data usage for that period of time. The Current Period does not reset on its own, so it will be counting everything from the last time you reset it through now. You can reset it by scrolling to the bottom and tapping on "Reset Statistics."
So, for example, if you reset your statistics 3 days ago and then there's 1GB used under App Store you'll know that over the last 3 days 1 GB of data has been used for the App Store.
SarahO_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Bookmarks - Hate the firefox version. Double click on the site to bookmark and the book it too small. And when in the bookmark window on the right side of the screen there is no way to know which folder you are actually in. Help.

Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

If I have say 200 photos in an EVENT and I use 50 of them in an ALBUM and months later I'm happy with the ALBUM and want to trash the 150 extras in part to save space on the hard drive, is there an easy way to find which photos to delete?

If I have, say 200 photos in an EVENT and I use 50 of them in an ALBUM, and months later I'm happy with the ALBUM and want to trash the extra 150 photos, is there an easy way to know which 150 photos to trash? My idea is to not have hundreds of photos taking up space on the hard drive.
Thanks.

Various ways:
Easy one: Flag the ones you want to keep (do this in the Album - Select All and Flag)
Then:
File -> New Smart Album
Event -> contains -> Name of the Event
Photo -> Is Not -> Flagged
will find the unwanted 150.
Regards
TD

Hi, I wanna know which app's are included in the Creative Cloud licence. Are some of them trial o life time?

Hi, I wanna know which app's are included in the Creative Cloud licence. Are some of them trial o life time?

Please check the app list from Explore Adobe desktop apps | Adobe Creative Cloud there are no products for life time trial, you will need to purchase within 30 days.
Regards
Rajshree

Is there an easy way to know if a vi within a LLB not being use by a Labview Application

To All,
I have developed a Labview application over a year that contains a number of LLBs. There are significant number of VIs within those LLB files that were written but have not been called by the application. I am trying to optimize all LLB files to exclude those unused VIs. Because there are many of them, the task to find out which Vi is being used and which one is not become very tedious. First question: Is there a way to automate the process? Second question: Does a compiled Labview application include all used and unused Vis from the LLBs in the .exe file? I am very appreciate any inputs from this community.
A Labview User

Ben wrote:
In pre-LV 8 you could do a "Save with options..." and choose development distribution, single prompt preserve hiarchy and LV will pick-up all of the used VI's and plomp them down in a new location leaving all of the used behind as well as fixing up a of the linkages to point at the new location.
In LV 8 and beyond you can create a Source Distribution in the project and acoomplish the same thing.
In LabVIEW 8+, you can get something similar to the first option by selecting "save for previous" and then pick the existing version (yes, it's there!).
LabVIEW Champion . Do more with less code and in less time .

Many sites show a grey box requesting a plugin but there is no way to know which plugin to install.

On a new install of Firefox (new laptop) i have many sites that show a grey box saying that a plugin is required to display the content. Clicking on the box does nothing so I don't know what is required.
Previous versions of Firefox told you what was needed and assisted in fixing the problem. (as far as I remember) IE and Chrome work fine on these sites.
one site is: http://www.allboat.co.nz/

The ALL BOAT site uses Flash, and since that is one of the web's most popular formats, I suspect many of the missing plugins are Flash.
There is a different Flash control for each browser. To get the one for Firefox, try loading the following page from Firefox:
http://get.adobe.com/flashplayer/
Before downloading, make sure the uncheck any unwanted extras.
Does that help?

Is there an easy way to toggle between an Apple ID and a cell phone number in Messages?

My son has an iPod but just a regular cell phone. We communicate a lot through texts/Messages but he doesn't always have a wifi connection on his iPod so sometimes, he is only reachable through his cell phone number and other times through his Apple ID. Is there an easy way to select which channel I want to contact him through on Messages?

Hi,
On your Mac in Messages with his conversation in "focus" (the one selected) Click and hold his Name in the "to" Spot and the top right of the right hand pane where the conversation is.
This will become a Drop Down and show you the iMessages (and other accounts he might have) options.
In some cases they may not have been used before and may not have the indicator.
Example
NOTE.
Any phone number will be listed as a potential iMessages ID as well any emails.
In the above example I happen to know that both the emails are Apple IDs (What I don't know is if my wife as linked either to her iPhone Number)
8:21 pm Wednesday; November 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

In I06, I have no way of knowing which songs are on my iphone 4s vs being stored in the cloud. There used to be a small cloud next to songs that were not downloaded. This was important to make sure I had the music I wanted when in an airplane.

In the new i06 that I just loaded into my 4s, I have no way of knowing which songs are on my iphone vs stored in the cloud. There used to be a small cloud next to songs that were not on the phone. This is an important piece of information if you are a frequent traveller, as most of the flights I am on don't have onboard wifi, so it becomes a crap shoot as to what I will have available to listen to.
Is there a way I can view what songs are actually stored locally?

Go to Settings > Music and set "show all music" to OFF.

Is there a way of knowing which external drive ejects?

Is there a way of knowing which external drive ejects?
I have several external drives and when one ejects on it's own it usually immediately restarts again and does not give me time to find which one was the problem drive.
Is there a way of figuring this out?
Thank you!

No unfortunately without restoring the library and running it there is no way to tell if it is good or not.
regards

Lost my iphone dont know my IMEI number tried to get it from ituens about and clicking the Control key but there is one imei and i have 2 phones backed up on my ituens is there a way to know which one is the right one?

Lost my iphone dont know my IMEI number tried to get it from itunesby clicking about and the Control key but there is one imei and i have 2 phones backed up on my itunes is there a way to know which one is the right one? and is there another way to find my phone and its offline so i cant use find my phone! Help

Other ways? Check the box? Call your carrier?

On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line?

On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line? This question relates to creating an interrupt handler when there are many events that cause an interrupt.

No. Read the User Manual, CH4, Change Notification.

Is there any easy way to compare LIKE Addresses from one table, which contains 3rd party data, to another table, our database source

We have a 3rd party that is supplying us data and we need to compare the addressing between the 3rd party data to our source database addressing. I'd like to make it somewhat flexible meaning I'd like to somehow use the LIKE comparison rather than comparing
the exact address values. (I have noticed that the 3rd party addressing sometime has a leading <space> at the beginning of the address...why I'd prefer to use LIKE)
Is there any easy way to do this? Or does this dictate using a CURSOR and processing through the CURSOR of 3rd party data and plugging in the address LIKE as dynamic SQL?
Please let me know your thoughts on this and I appreciate your review and am hopeful for a reply.

Yes, it's possible and there are a variety of options but it's may not be for the faint of heart.
The last time I did it, I ended up taking several passes at the data.
1st pass was a straight up comparison with no modifications or functions.
2nd pass was the same but with all special characters removed.
3rd pass involved splitting the numeric portion of address and comparing just the street numbers and used a double meta-phone function (kind of like a soundex on steroids) to compare the street names.
Jason Long

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

Is there an easy way to install Windows 7

I'm using Bootcamp and already have Windows XP install as a second OS. I've pre-ordered Windows 7 several months ago and now I have it in hand and would like to replace Windows XP on my iMac.
Though I may not use Windows 7 very much (I'm very pleased with my Apple OS), I would still like to install it.
Is there an easy way to erase the partition that has Windows XP and install Windows 7 instead? How can I do this without touching the Apple OS in fear that I might currupt it in some way?
Thanking you all in advance,
Chippathingy

You should considering using VMware Fusion, Parallels Desktop, or Sun's VirtualBox (which is free). Then, you won't have to dedicate a whole partition to Windows. And Windows will be running alongside Mac OS X, so on those less frequent occasions when you need to use a Windows program, you will not need to restart. Plus you can import your existing Windows XP installation as a virtual machine (I don't know if VirtualBox has an import feature), and have a separate virtual machine for running Windows 7, again with no separate partition; you can even have a virtual machine with one of the Linux'es.

Is there an easy way to know which app(s) are causing spike in Data Usage?

Similar Messages

Maybe you are looking for