Is there an easy way to play videos consecutively?

I am using ios 7.1, and would like to play a series of 10 minute videos without having to click each one individually. I have searched around, and keep finding references to being able to do it, but then find that it seems to be gone in ios7.1. Is there are way around this??
Thanks,
Emily (going on a long plane ride with a 2 year old, who only likes one TV show, which has 10 minutes epoisodes...)

iMovie does have that feature.
Video is iPhoto needs to be exported first to the desktop, then uploaded from there.
File -> Export and set the Kind to Original

Similar Messages

  • Is there an easy way to transfer videos from one ipad to another?

    Hey all, I had a question pertaining to transfer of videos from one iPad to another iPad. Is there a way to do this wirelessly or even transfer by data cable from one iPad directly to another without having to use a computer as an intermidiary?

    You should be syncing your contact to your computer.
    You can probably find a way to get the contacts from your computer to your new phone.

  • Easy Way to Play Clips in Sequence?

    Noob question:
    Is there an easy way to play my clips in sequence without dragging each into the timeline?
    When I log and capture, FCP7 creates a separate clip each time I restart recording.  Can I look at each clip one after the other without double clicking on it and playing each in the viewer?  I've done a brief search of this forum and the manual without finding anything.

    Sure...use another editing app.  FCX allows for clip scrubbing.  Prelude, part of Adobe CS6, does too.
    But FCP, and most other editing apps, require that you load clips into the VIEWER to watch them.  Or, you can grab them all, drag them into the sequence to make a quick "stringout" of all your clips for viewing. 
    This is basic editing...load the clips into the Viewer to watch them.  But Apple has changed that by allowing clip scrubbing in FCX.  So if you want that, you should take a look at that app.

  • Is there a way to play videos other than getting them through itunes

    is there a way to play videos other than getting them through itunes.  I have lots of dvd's that I want to play on my ipad but don't want to have to buy them again through itunes.

    You'll need to rip the DVDs to your hard drive using a tool such as Handbrake. Be sure to rip them in an iPad compatible format. Then you can drag them into iTunes and sync them to your device. It is a little bit of work but that's really the only way without (as you say) rebuying them in iTunes.

  • Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

    Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

    Use the search feature and type in Flash and there are like thousands of posts on this.
    You seem to think you are addressing Apple with your post.  This is a user forum and we are all users just like you.

  • Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

    Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • Is there an easy way to reimport all songs in my itunes folder?

    This may sound like a weird question but here goes... When I bring up my iTunes I have 8731 files (mostly music) that come to about 41.33G's but when I right click on my iTunes Music folder and select properties there are 8809 files and a total of 48.5G's. I am trying to free up some disk space and can't figure out why there is such a difference. I had issues with Norton 360 and removed it but I had to restore my music files from an external drive and when I did so I lost the links for music that I added after my last back-up. I noticed that TV shows I bought from Apple were not in my iTunes but I was able to locate them in the folder, and import them back into iTunes. I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts or a way to figure out which files may be duplicated in my iTunes Music folder. Seems like I am wasting 7G somewhere that I would like to recover. I already went through the duplicate songs and that didn't help. Any suggestions would be great...
    hp pc m260n   Windows XP   media center

    I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts
    AFIK there isn't an easy way of linking up to a lot of dead tracks and retaining play counts etc, except by finding the dead tracks and repairing each link individually. The only exception to this is if there is a simple error in the path that can be fixed by a search and replace on the xml library file, then rebuilding the library. However it doesn't sound as though that would be a solution for you.
    This MacMuse tip has a way of finding dead tracks if that helps.
    http://discussions.apple.com/thread.jspa?threadID=121967
    It is much simpler to sacrifice the playcount information and just reimport your iTunes Music folder. Then you can eliminate the dead tracks with a script. One of the forum members has written one that you can find here:
    http://home.comcast.net/~teridon73/itunesscripts/

  • I am looking to "move out" of my computer and into my wife's, is there an easy way to accomplish this task, keeping all my files and setting up a second user?

    I just bought a new external 3TB hard drive for this task and want to keep my items seperate from hers for both our sanity.
    I figured that I would do a time machine back up and use that to do the move part of things.
    But as to setting up the new user on her computer I am just not sure if I can "tell" the computer to only use the new drive for my stuff and only acces the new drive for all things related to that new profile.
    More then anything else I want to be able to say that all things that are hers have not been touched/acccesed/deleted by any of my actions. And that I am "confined" to the new drive.
    I hope this makes sence.
    Mr Geef

    I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts
    AFIK there isn't an easy way of linking up to a lot of dead tracks and retaining play counts etc, except by finding the dead tracks and repairing each link individually. The only exception to this is if there is a simple error in the path that can be fixed by a search and replace on the xml library file, then rebuilding the library. However it doesn't sound as though that would be a solution for you.
    This MacMuse tip has a way of finding dead tracks if that helps.
    http://discussions.apple.com/thread.jspa?threadID=121967
    It is much simpler to sacrifice the playcount information and just reimport your iTunes Music folder. Then you can eliminate the dead tracks with a script. One of the forum members has written one that you can find here:
    http://home.comcast.net/~teridon73/itunesscripts/

  • Is there an easy way to replace/swap assets?

    I output my short from Avid, ran it through Compressor, and made a DVD in DVD Studio Pro.
    Now I've done some re-cuts and want to create a DVD of the new version, using the DVD Studio Pro file I used for the last DVD. Is there an easy way in DVD Studio Pro to "relink" the new video assets to replace the old ones in the new version? This would save me from rebuilding the main menu button, redesigning navigation, and recreating chapter marks.
    I have found a workaround - Quit DVD Studio Pro, "hide" the old assets in a folder, and then direct DVD Studio Pro to the new assets when it asks where the old assets are located. But I wonder if there is an easier way to do this from inside the program.
    Thanks very much for any advice!
    I am using DVD Studio Pro version 4.2.1

    Eric, thanks for chiming in.
    I assume you mean replace the old ones with the new ones on the Finder level?
    Well, part of my goal is to avoid destroying, re-naming, or moving the old assets.

  • Is there an easy way to convert and import MTS files from a external hardrive so that I can edit them in FCP?

    I am trying to convert game footage that is in MTS format to something that I can edit into a quick highlights video. I have final cut express and the standard IMovie '09. looking for easiest solution, everything seems to involve using one application to convert to Quicktime and then dropping file into Iphoto etc. is there an easy way?

    I'm not completely sure that MPEG Streamclip can convert AVCHD footage (.mts files).  If MPEG Streamclip doesn't do the job, then get a copy of Clipwrap, which was designed for transcoding .mts files to QuickTime/Apple Intermediate Codec (that's the format/codec you need to convert the .mts files to for use in FCE).

  • I am trying to convert a .fla file to an .flv file, is there an easy way to achieve this.

    I made several movies using symbols and motion twens and now wish to save these as an flv to play in a web browser.
    Could someone please respond with an easy solution as I am just learning about this.
    Thankyou.

    Cheers for the head up, it worked, now I feel like a simpleton. I only saw the choice for doc.fla and thought it must be complicated.
    Kind Regards
    Andrew Whitehead
    [email protected]
    CONFIDENTIALITY - This email and any files transmitted with it, are confidential, are intended solely for the use of the individual or entity to whom they are addressed. If this has come to you in error, you must not copy, distribute, disclose or use any of the information it contains. Please notify the sender immediately and delete them from your system.
    SECURITY -All email is scanned with Kaspersky Internet Security 2010. Please be aware that communication by email, by its very nature, is not 100% secure
    VIRUSES - Although this email message has been scanned for the presence of computer viruses, the sender accepts no liability for any damage sustained as a result of a computer virus and it is the recipient’s responsibility to ensure that email is virus free.
    AUTHORITY - Any views or opinions expressed in this email are solely those of the sender.
    Date: Thu, 25 Feb 2010 11:48:11 -0700
    From: [email protected]
    To: [email protected]
    Subject: I am trying to convert a .fla file to an .flv file, is there an easy way to achieve this.
    No worries, that is very simple to do.
    Just click on File--> Save As and select your "File Type" and select as "Flv." 
    Let me know how it goes and if you have any questions regarding Flash, please feel free to ask me here or sending me an email.
    Hope this helps,
    Vicente Tulliano
    >

  • Is there an easy way to get rid of duplicates in your music library?

    Is there an easy way to get rid of duplicates in your music library?

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership.See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • Is there an easy way to move contacts and calander from my office microsoft outlook to personal imac?

    is there an easy way to move contacts and calander from my office microsoft outlook to my personal imac?

    You can import the clips in the order you want them to play, which would be the quickest.
    Or you can put them all in the timeline, then zoom out on the timeline (two finger squeeze).
    That makes it easier to hold the clip, and drag it to the start.
    http://help.apple.com/imovie/ipad/1.2/index.html

  • Easy way to clip video in iPhoto?

    If I have a video clip that imports into iPhoto, is there an easy way to trim it down to size if it has footage I want to drop? I'd rather not have to go into iMovie '08 and cut it down, export it, reimport it, etc, etc.
    Suggestions?

    iPhoto can't edit movie files but you can do it in Quicktime Pro or iMovie. ActuallyiMovie HD 6 would be easier to use, IMO, than iMovie 7. It's been made available to those who've have iLife 08 and would rather use V6.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • When i drag and drop to my ipod it wants to sync everything, but if i make changes to the syncing options and apply it wants to sync it all to make it work. i have 12000 songs and takes two days to sync everything. is there an easier way to drag and drop

    when i drag and drop to my ipod it wants to sync everything, but if i make changes to the syncing options and apply it wants to sync it all to make it work. i have 12000 songs and takes two days to sync everything. is there an easier way to drag and drop just one album without making settings changes?

    The first ever Sync of 12,000 songs to an empty iPod will take a while, but it shouldn't take two days.
    Once all 12,000 songs have been Synced to the iPod, subsequent changes to just one album will result in a very short Sync time. That Sync will include:
    the change to that one album
    play counts on iPod updated into your iTunes Library
    Smart Playlists updated: some complex Smart Playlists are not always updated by the iPod but have to wait for a Sync with the Library.
    housework - in other words, behind the scenes tasks that we don't need to see.
    Those subsequent Syncs do not sync every single song every time.
    So, stick with Syncing. If the first Sync of all your songs is taking too long, try syncing part of the Library (say one or two genres) the first time, a further part the second time and so on. After all, with a Library that large, manually managing the iPod will be a source of torture.

Maybe you are looking for