Is there an easy way to synchronize multiple computers running teststand?

I have a test setup where I need to have teststand running on two seperate comupters, but the sequences need to be in sync with each other so that the correct steps happen in the right order. I was hoping to do this over ethernet if possible.
Thanks in advance for your help.
Solved!
Go to Solution.

Hi,
There is a way to access synchronization objects remotely with TestStand. Look at Appendix B, Synchronization Step Types, section called 'Setting Up TestStand for Accessing Synchronization Objects Remotely' of the TestStand Reference Manual.
link to the ref manual: http://digital.ni.com/manuals.nsf/websearch/2B14FB1CD4FF25CA862577AE00554FC7
Thanks,
Jim

Similar Messages

Is there an easy way to move multiple icons from one screen to another?

I have multiple screens on my iphone 5c display. I want to move multiple icons at the same time from one screen to another. Is there a way to do this?

You could put them all in a single folder and move the folder to another screen.

HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

HT1660 is there an easy way to delete the whole itunes library and and start again. I notice there is only an add file/folder button but no remove facility

I recently upgraded to the iphone 5 and managed to sort the transition out with little trouble but noticed when I tried to put my music on that Itunes has messed with album info and either it or me has generated several copies of the same albums over the years and it makes it quite dificult to sort it all out before reloading on the phone. To stop the chaos I had hoped to clear the library and start again but cant find a way to do it. I was hoping to sort all my music out in original files and consolidate them into a proper folder. HOw do I do this. I notice there is an add fole and folder button but no take away??? is there an easy way?

Use Shift > View > Show Exact Duplicate Items as this is normally a more useful selection. You need to manually select all but one of each group to remove. If you have multiple references to the same files then don't send to the recycle bin. Use my DeDuper script if you don't want to do it by hand. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Is there an easy way to create 2 page imposed PDFs with a background?

I have figured out a way to create a suitable imposed single page PDF using the 'import as layer' action, the action only understands a single paged background PDF.
In other words, I have a PDF that has the suitable marks on it with the pages marked 'Page 1' & 'Page 2'. This is the background PDF.
I open this PDF in Acrobat and run the action that places another PDF (the 'Source' PDF) on multiple layers with different offsets.
The original (template) PDF is 2 pages & the Source PDF for imposition is 2 pages, and even though the 'import as layer' understands that the source PDF being imposed is 2 pages, it does not seem to allow the original (template) PDF to be seen as 2 pages.
There is a 'Target page number' option in the Preview area, but that is grayed out at 1.
So...other than commercial applications, is there an easy way to build a 2 page PDF imposition file??
Maybe a script?

Sabian,
Yes, the Quite software would be perfect, especially the 'Hot'. Tested & works great for us, but the price tag for the 'Hot' is rather steep for our relatively simple process......background template with a 'step & repeat' of the 'live' document.
As I mentioned in the original post, to do this with a single page PDF is simple enough using an action that places the 'live' doc multiple times, but the vast majority of our publications are 2 pages.
Currently runing the action twice for each job. I would save a bit of time if this could be automated to do both sides with one action, or one script.

Is there an easy way to transpose 2 colors in Illustrator CS6?

I have a black and gold logo in Illustrator, and I want to change it so that everything that is now black will be gold and everything that is now gold will be black.
I tried select same fill, then used the eyedropper to change the gold to black, but then I realized if I do the same with the black, I will end up also selecting everything that I just changed.
I'm hoping there is some easy way around this I am not seeing. The only thing I can think of is maybe pasting the elements I've changed into a different layer and locking it.
But is there an easier way without having to move to a different layer?

it,
Here is an edited reply since it has proved impossible to edit the first post:
You may, for multiple objects of the same colour (presuming fills only, it may be done similarly with strokes and with combinations of fills and strokes):
1) Select one gold object and Select>Same>Fill Color, then set it to white (or whatever) in the Color palette;
2) Select one black object and Select>Same>Fill Color, then set it to gold;
3) Select one white (formerly gold) object and Select>Same>Fill Color, then set it to black.
The Select Same part is unnecessary for a single object of a colur, of course.

Easy way to aggregate multiple dimensions or measures?

We've experimented with some odd solutions, but I wonder if there is an easy way to aggregate multiple measures in a report variable. Here are the details:
Assume the universe has several numeric measures called MAX_ONE, MAX_TWO, and MAX_THREE. We take advantage of these measures for all the normal reasons. However, we also need the total aggregate MAX_TOTAL of all of those MAX values. Due to the complexity of the joins in the universe we cannot simply make another MAX_TOTAL in the universe, so instead, we are trying to create this as a report variable. However, the MAX function seems to want one dimension only. I really want a MAX of the MAX values, or more genericallly, an aggregate measure that uses other aggregate measures.
I've tried to call Max() with multiple measures as parameters, but cannot seem to get the syntax correct (if it's supported at all). Wonder if there's something I'm missing to declare a set, array, or something like that... or if there is a more creative way to solve this problem.
If suggesting solutions, please remember that adding it as a new measure in the universe is not an option for us. This particular MAX is quite complex for our universe and if we try to follow that path we end up with incompatible joins or joins that produce no rows due to the nature of the schema. So we're really focused on the solution path of creating a report variable that is an aggregate of other aggregates on the reporting side at this point.

Not really. My example only contained three max aggregates as an example. However, in reality it's more likely to have something like 20-40 of these in a report (or maybe as many as 100 in some special reports). The "IF" strategy causes a somewhat exhaustive explosion of statements... didn't think about the exact math but it's probably a factorial explosion something like (n-1)! or so. Aside from the messy look that would make it hard to maintain, there are also limits of nesting (due to stack space) and limits of the formula text itself.
P.S., I do have a solution that I'm currently using that is a way "out of the box" given our specific use case of this aggregate function. However, I'm not going to reveal it until I'm sure there isn't a better way to do this using another syntax that is directly supports this or is more efficient.

Is there an easy way to get rid of duplicates in your music library?

Is there an easy way to get rid of duplicates in your music library?

Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership.See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

I have two iTunes libraries I need to merge. Both contain over 34,000 songs, so I cannot do this manually. Is there an easy way to do this?

I have two iTunes libraries I need to merge. Both contain over 34,000 songs, so I cannot do it manually. Is there an easy way to do this?

Drag the media folder from one over to an open iTunes window. Go away and have a long lunch. Of course if you have a lot of common content you will be spending your next vacation sorting out the duplicates. Oh, you can search the Internet because I am sure somebody has some wonder tool that purportedly prevents duplicates, not that I would trust any automated method. I always deal with duplicates one by one.
Consolidating Multiple iTunes Libraries - http://www.ilounge.com/index.php/articles/comments/consolidating-multiple-itunes -libraries-api1/ - Basically using consolidate/organize to make sure all your media are in one place, then copying media from a second library to the main one by simply adding the media as new files.
Commercial software that purportedly helps merge libraries (not a complete list, nor have I tried any of them):
http://supersync.com/
PowerTunes - http://www.fatcatsoftware.com/powertunes/ (commercial software)

I have a lot of duplicate songs on my iPhone 4--Is there an easy way to find and delete duplicates?

Is there an easy way to find and delete duplicate songs on an IPhone 4?

A belated hello. On the topic of duplicate songs / tracks showing up in, say, your iPhone Music app but not in your iTunes Library, with these versions installed ....
iTunes 10.5
iPhone 4 running on iOS 5
.... I discovered this too. This is what I did:
1. purchased full album from the iTunes Store
(once download completed, album magically showed up in iPhone Music app, as expected, without having to sync)
2. I then went to my iTunes Music view and edited the album year (Multiple Item Information)
3. Synced
4. All album tracks showed up in duplicate in iPhone Music app (but not in iTunes view)
Solution:
1. in iTunes, I changed back the album year to the one iTunes Store originally downloaded
2. Re-synced
3. Now all album tracks show up but no longer in duplicate in iPhone Music app
Lesson learned: When purchasing music from iTunes Store, leave metadata untouched.

Is there an easy way to make JSpinner wrap around at max/min values?

I have several pages with a couple dozen JSpinners to set various values - mostly numeric, but some are not.
I would like to make them wrap around when either the max or min values are reached.
Is there an easy way to do this?
I was hoping for something like an "enableWraparound" property, but I haven't found such an animal.
I suspect I could add value change listeners to all the components and do it by brute force,
but there are too many spinners scattered around to make that an option I would like to take.
Any suggestions?
Thanks.

Ok, it looks like custom spinner models are the way to go.
Hopefully, I can create a couple that are generic enough to meet my requirements without too much pain.
It looks like the ones I have already created will be easy enough to modify.
Thanks for the feedback.

Is there an easy way to clear the contents of Download Folder?

Is there an easier way to clear out files (send to trash) from the downloads folder, other than dragging one by one? The downloads folder closes immediately upon dragging one file out.

You do not need to invoke Finder to do this. Create a new empty Automator workflow and use the "Run Shell Script" option. Paste in the following....
mv ~/Downloads/* ~/.Trash
You can then save the workflow as an application, attach it as a Finder action or add it to the scripts menu, whichever you like better.
If you would like to bypass the Trash and just completely delete the Downloads folder contents immediately, then paste in this command:
rm -rf ~/Downloads/*

Is there an easy way to reimport all songs in my itunes folder?

This may sound like a weird question but here goes... When I bring up my iTunes I have 8731 files (mostly music) that come to about 41.33G's but when I right click on my iTunes Music folder and select properties there are 8809 files and a total of 48.5G's. I am trying to free up some disk space and can't figure out why there is such a difference. I had issues with Norton 360 and removed it but I had to restore my music files from an external drive and when I did so I lost the links for music that I added after my last back-up. I noticed that TV shows I bought from Apple were not in my iTunes but I was able to locate them in the folder, and import them back into iTunes. I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts or a way to figure out which files may be duplicated in my iTunes Music folder. Seems like I am wasting 7G somewhere that I would like to recover. I already went through the duplicate songs and that didn't help. Any suggestions would be great...
hp pc m260n Windows XP media center

I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts
AFIK there isn't an easy way of linking up to a lot of dead tracks and retaining play counts etc, except by finding the dead tracks and repairing each link individually. The only exception to this is if there is a simple error in the path that can be fixed by a search and replace on the xml library file, then rebuilding the library. However it doesn't sound as though that would be a solution for you.
This MacMuse tip has a way of finding dead tracks if that helps.
http://discussions.apple.com/thread.jspa?threadID=121967
It is much simpler to sacrifice the playcount information and just reimport your iTunes Music folder. Then you can eliminate the dead tracks with a script. One of the forum members has written one that you can find here:
http://home.comcast.net/~teridon73/itunesscripts/

I am looking to "move out" of my computer and into my wife's, is there an easy way to accomplish this task, keeping all my files and setting up a second user?

I just bought a new external 3TB hard drive for this task and want to keep my items seperate from hers for both our sanity.
I figured that I would do a time machine back up and use that to do the move part of things.
But as to setting up the new user on her computer I am just not sure if I can "tell" the computer to only use the new drive for my stuff and only acces the new drive for all things related to that new profile.
More then anything else I want to be able to say that all things that are hers have not been touched/acccesed/deleted by any of my actions. And that I am "confined" to the new drive.
I hope this makes sence.
Mr Geef

I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts
AFIK there isn't an easy way of linking up to a lot of dead tracks and retaining play counts etc, except by finding the dead tracks and repairing each link individually. The only exception to this is if there is a simple error in the path that can be fixed by a search and replace on the xml library file, then rebuilding the library. However it doesn't sound as though that would be a solution for you.
This MacMuse tip has a way of finding dead tracks if that helps.
http://discussions.apple.com/thread.jspa?threadID=121967
It is much simpler to sacrifice the playcount information and just reimport your iTunes Music folder. Then you can eliminate the dead tracks with a script. One of the forum members has written one that you can find here:
http://home.comcast.net/~teridon73/itunesscripts/

Is there an easy way to filter a 2-d array based on the values of two of the fields?

Is there an easy way to filter a 2-d array based on the values of one of the fields. In my attached VI the output array has the following format:
TimeStamp        Ident                Frame Type        Bytes    Data
10:57:07.621   3AD00016   CAN Data Frame   8          0000000000000000
10:57:07.622   3AD00017   CAN Data Frame   8          000005E000000000
10:57:07.624   3AD00018   CAN Data Frame   8          0000000003300000
10:57:07.625   2DC00000   CAN Data Frame   8          0000000000000000
10:57:07.626   3AD00019   CAN Data Frame    4         0000030000000000
I would like to delete any rows that do not have an "Ident" between the values of 3AD00000 and 3AD0001E. So for the above data the fourth row would be deleted. The only way I can see to do it is to form a 1-d array. Is there a better approach?
Thank you.
Solved!
Go to Solution.
Attachments:
CMM_SN_MULTI.vi ‏20 KB

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

Is there an easy way to synchronize multiple computers running teststand?

Similar Messages

Maybe you are looking for