Is there an Epson RX530 print/scanner driver available for Maverick?

Hi
I have an Epson Stylus PHOTO RX530 that worked quite happily under the previous version of Mac OSX until Mavericks came along.
I've searched the Epson site that refers the solution may be found on the Apple Support site. No joy.
I can't be alone. Has anyone out there found a driver that works?

You need to discuss this with the Epson Technical Support.  Based on information posted on the Epson Support website, the answer is probably "no":
Scanner Driver
05/31/13More Info
Description: Although Epson does not offer a 64-bit driver for your product, there is a 3<sup>rd</sup>
party solution available from a company called Hamrick. For additional
information on Hamrick and their VueScan software, please visit
hamrick.com. If you would prefer to purchase a new, 64-bit compatible scanner from Epson, please visit our
Scanners page.
Note: Hamrick's VueScan software does require purchase and is not supported by Epson.
Compatible Systems: Windows 7 64-bit, Windows Vista 64-bit, Windows XP 64-bit
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • EPSON CX3810 Printer/Scanner - need drivers to get the scanner to work

    Finally got this default printer to work on my new macbook pro. I had to get a driver for the printer off the Epson website. Downloaded the EPSON CX3800 Guten v.5.2.3. Printer works.
    Epson shows no drivers to get the scanner section working, same with Apple.
    Does anyone know of any work arounds to get the scanner section working on the EPSON CX3810 printer/scanner?

    This was originally a Windows-only device. There is only limited support for it on a Mac. This 'limited' support is basically low-level printing support only. There does not appear to be any support for the scanner section for anything other than Windows.
    As this was not one of Epson's more popular devices, 3rd-party support is also limited. It is unlikely that you will get 3rd-party scanner support if VueScan doesn't work.
    This device is discontinued. This means that support from Epson will be even more limited in the future than it is now. Translation: if it doesn't work now, odds are good that it will never, ever, work.
    I'd get a new MFD. Preferably one which ships with Mac support in the box. Brother, Canon, HP, and, yes, Epson, all make machines which will work. (I'd stay far away from Lexmark, but that's me.)

  • Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini?

    Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini? Since this is the slowest component of the whole system is there a way to upgrade to something faster (possibly a 7200RPM drive)?
    thanks,
    Jeff

    Ways to make it faster:
    1) Be sure you aren't running any Rosetta apps or drivers. Watch out for print drivers. You can use Utilities > Activity Monitor to spot the legacy stuff that uses Rosetta. (Make sure the pop-down menu at the top of the Activity Monitor window says "All Processes", not just "My processes".)
    2) Max your RAM to 2 Gigs. You can't go to 3 Gigs since you only have the CoreDuo CPU.
    3) Whatever hard drive you use, keep at least one-third of it empty. Obviously this will be easier with a large external firewire drive.
    4) 3.5 inch drives will be faster than 2.5 inch drives -- even at the same RPM. So again, external will be the way to go, since Minis can only take 2.5 inch internals.
    If you want an external that stacks under the Mini, some examples are here:
    http://www.123macmini.com/accessories/guide/enclosures.html
    (The NewerTech and WiebeTech models appear to have good reputations, though I have no personal experience with them.)
    But again, all of the factors I mention above will affect performance.

  • I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    Welcome to the Apple Community.
    Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    Any responses you may receive may well be removed and would be wholly unreliable in any case.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Is there driver available for Yokogawa 2423 thermometer?

    Is there Labview driver available for Yokogawa 2423 Portable Multi Thermometer? Or can I use some other device driver for same purpose? This device is quite old, from late 80's. I would still like to use it with WinXP, Labview 7.1 and rs-232 connection.

    You can search for LabVIEW instrument drivers at the ni.com/idnet Instrument Driver Network. The site has over 3000 instrument drivers and several other resources if you can't find exactly what you are looking for. For instance, you can make a request for a particular instrument driver, or you can view tools on how to create your own.
    I did a quick search for your instrument, but I couldn't find the exact model. However, you may be able to download similar ones from the site that you can modify for your purposes.

  • Is there an external hard drive available for Lion?

    Is there an external hard drive available for Mac  OS X v10.7?

    How big of a drive do you want? Western Digital USB MyPassport drives work great and are inexpensive. You can buy them Mac formatted or just buy one that isn't and use Disk Utilities to format it for a Mac. As far as I know any of the external drives will work with OS X Lion.
    I use a 500GB MyPassport. My MacBook Pro mid-2010 has a 320GB drive and i'm using less than 60GB so the 500GB external is plenty for my back up needs. I use it with Time Machine and SuperDuper! (for bootable images) in Lion.

  • Is there a print preview button available for Firefox 8 please?

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/895214''
    Is there a print preview button available for Firefox 8 please?

    Hi the-edmeister, thank you for your post. I have tried this and found the button to be there as you said but the print preview function does not seem work with Firefox 8. Unless I am doing something wrong. In the add-ons section I could only find print preview button for 0.7.7 this I have installed with above result. Could you have another look for me please to see if there is anything else I can do? Many thanks. Juco

  • Vf0040 driver - available for Mac?

    Someone gave us a vf0040 webcam. I don't understand what driver works with it on a pc. I also want to know if there's a driver available for Mac.

    That was an entry level color laser printer that was never designed to work with OS X. However I did find this thread:
    https://discussions.apple.com/thread/1234447?start=0&tstart=0
    Good luck!

  • I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    Apple only supports Windows on certain hardware.
    http://www.apple.com/support/bootcamp/
    Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
    It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
    Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
    http://refit.sourceforge.net/
    This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
    I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
    There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

  • Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

  • Is there any delivered BAPI or Functional modules available for MCHB table

    Hi Experts,
    I have a requirement where I have to pull inventory data from MCHB table without custom code. Is there any delivered BAPI or Functional modules available for MCHB table?
    Kindly help!
    Thanks
    Gopal

    Hi,
    Can you check using the Fun Modules
    MG_BATCH_CHECK_STOCK
    VB_READ_BATCH_WITHOUT_STOCK
    VB_BATCH_GET_ALL_STOCKS
    Regards,
    Anji

  • Do we have driver available for Lake Shore Model 128 temperature sensor?

    Do we have driver available for Lake Shore Model 128 temperature sensor? I want to make sure before we start writting our own drivers to communicate with this hardware.
    Thanks,
    Marivell Baez

    Hi Marivell,
    Take a look at ni.com/idnet. A quick browse found Lake Shore Cryotonics Temperature meters here: http://sine.ni.com/idnetwork/main/p/sn/n25:LM/sb/navsRel?q=lake+shore+temperature&x=0&y=0
    This may not be what you are looking for though and consulting with your user manual for the appropriate commands to be sent would get you in the right direction for creating a complete set of Sub-VIs. Is this device a sensor or a meter controlled via an instrument protocol (GPIB, Serial, LAN, etc.)
    PBear
    NI RF

  • Are there Blip.tv or Twitch.tv apps available for Apple TV?

    I'm deciding whether or not to purchase an Apple TV.  One of the deciding factors is access to some of my favored internet shows.  So are there Blip.tv and Twitch.tv apps available for Apple TV.  And if not is it easy to mirror from the apps on my iPad to the Apple TV?

    No, these aren't features of the Apple TV.
    As for being able to mirror them by AirPlay, some providers block airplay for their apps, you might need to check with the developer exactly what the position is.

  • Best driver available for MicroSoft SQL server?

    Hi,
    I am using MS-SQL server for my application server.
    Which driver should i use for it?
    Right now I am using ODBC driver.
    Please suggest me a few links where i could get the best driver(thin driver) for SQL server.
    regards
    suri

    Hi,
    best driver available for MicroSoft SQL server?i-net software has written a solid JDBC driver based on TDS. The trial version is limited to a single connection. http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
    jTurbo provides jdbc driver for MS SQL Server (www.jTurbo.com).
    Merant technologies also provides jdbc driver for MS SQL Server. Find more details at http://www.microsoft.com/sql/downloads/2000/jdbc.asp.Microsoft licenses MERANT's JDBC driver for SQL Server 2000.
    I cannot comment which one is the best driver. It depends on your project requirements and the buget alloted.
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Micro Sysytems
    http://www.sun.com/developers/support/

  • I have an Epson NX420 printer/scanner, and I keep getting a message on the scanner, saying that there is a communication error, check the connection.  I am not having any luck scanning my pictures into the computer.

    I have an Epson Nx 420/printer/scanner, and I keep getting a message that says there is a communication error.  Check the connection [W-61}.  I have the snow leopard operating system Mac OS X 10.6.8  I want to scan my pictures into iphoto.  Can someone please tell me what I am doing wrong. Thankyou.

    Make sure you have updated all of your scanner drivers.  Check Software update and check with Epson tech support.
    Not sure if the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers deal with scanners.  Read the info on their website.
    Check Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions for scanner troubleshooting.  Especially if you have an all in one.

Maybe you are looking for